Merge tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New Support:
   - Debugfs support for phy core and mediatek driver
   - Hisilicon inno-usb2-phy driver supporting Hi3798MV100
   - Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
     SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574,
     IPQ9574 USB3 PHY

  UpdatesL
   - Sparx5 serdes phy power optimzation
   - cadence salvo usb properties and updates and torrent DP with PCIe &
     USB support
   - Yaml conversion for Broadcom kona USB bindings and MXS USB binding"

* tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (67 commits)
  dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
  dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
  dt-bindings: phy: intel,combo-phy: restrict node name suffixes
  dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  phy: tegra: xusb: check return value of devm_kzalloc()
  phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
  phy: qcom: add the SGMII SerDes PHY driver
  dt-bindings: phy: describe the Qualcomm SGMII PHY
  phy: qualcomm: fix indentation in Makefile
  phy: usb: suppress OC condition for 7439b2
  phy: usb: Turn off phy when port is in suspend
  phy: tegra: xusb: Clear the driver reference in usb-phy dev
  dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
  dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  dt-bindings: phy: qcom,qmp-usb: fix bindings error
  dt-bindings: phy: qcom,qmp-ufs: fix the sc8180x regs
  dt-bindings: phy: qcom,qmp-pcie: fix the sc8180x regs
  phy: mediatek: tphy: add debugfs files
  phy: core: add debugfs files
  phy: fsl-imx8mp-usb: add support for phy tuning
  ...

Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml

@@ -115,8 +115,8 @@ allOf:
         compatible:
           contains:
             enum:
-              - const: brcm,bcm4908-usb-phy
-              - const: brcm,brcmstb-usb-phy
+              - brcm,bcm4908-usb-phy
+              - brcm,brcmstb-usb-phy
     then:
       properties:
         reg:

Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt

-BROADCOM KONA USB2 PHY
-
-Required properties:
- - compatible: brcm,kona-usb2-phy
- - reg: offset and length of the PHY registers
- - #phy-cells: must be 0
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-	};

Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,kona-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family USB 2.0 PHY
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,kona-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@3f130000 {
+        compatible = "brcm,kona-usb2-phy";
+        reg = <0x3f130000 0x28>;
+        #phy-cells = <0>;
+    };
+...

Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml

@@ -31,6 +31,12 @@ properties:
   "#phy-cells":
     const: 0
 
+  cdns,usb2-disconnect-threshold-microvolt:
+    description: The microvolt threshold value utilized for detecting
+      USB disconnection event.
+    enum: [575, 610, 645]
+    default: 575
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml

@@ -35,6 +35,53 @@ properties:
     description:
       A phandle to the regulator for USB VBUS.
 
+  fsl,phy-tx-vref-tune-percent:
+    description:
+      Tunes the HS DC level relative to the nominal level
+    minimum: 94
+    maximum: 124
+
+  fsl,phy-tx-rise-tune-percent:
+    description:
+      Adjusts the rise/fall time duration of the HS waveform relative to
+      its nominal value
+    minimum: 97
+    maximum: 103
+
+  fsl,phy-tx-preemp-amp-tune-microamp:
+    description:
+      Adjust amount of current sourced to DPn and DMn after a J-to-K
+      or K-to-J transition. Default is 0 (disabled).
+    minimum: 0
+    maximum: 1800
+
+  fsl,phy-tx-vboost-level-microvolt:
+    description:
+      Adjust the boosted transmit launch pk-pk differential amplitude
+    minimum: 880
+    maximum: 1120
+
+  fsl,phy-comp-dis-tune-percent:
+    description:
+      Adjust the voltage level used to detect a disconnect event at the host
+      relative to the nominal value
+    minimum: 91
+    maximum: 115
+
+  fsl,phy-pcs-tx-deemph-3p5db-attenuation-db:
+    description:
+      Adjust TX de-emphasis attenuation in dB at nominal
+      3.5dB point as per USB specification
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 36
+
+  fsl,phy-pcs-tx-swing-full-percent:
+    description:
+      Scaling of the voltage defined by fsl,phy-tx-vboost-level-microvolt
+    minimum: 0
+    maximum: 100
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS USB Phy Device
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-usbphy
+          - fsl,imx7ulp-usbphy
+          - fsl,vf610-usbphy
+      - items:
+          - enum:
+              - fsl,imx28-usbphy
+              - fsl,imx6ul-usbphy
+              - fsl,imx6sl-usbphy
+              - fsl,imx6sx-usbphy
+              - fsl,imx6q-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - const: fsl,imx6sll-usbphy
+          - const: fsl,imx6ul-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - enum:
+              - fsl,imx8dxl-usbphy
+              - fsl,imx8qm-usbphy
+              - fsl,imx8ulp-usbphy
+          - const: fsl,imx7ulp-usbphy
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  fsl,anatop:
+    description:
+      phandle for anatop register, it is only for imx6 SoC series.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  phy-3p0-supply:
+    description:
+      One of USB PHY's power supply. Can be used to keep a good signal
+      quality.
+
+  fsl,tx-cal-45-dn-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DN output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-cal-45-dp-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DP output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-d-cal:
+    description:
+      Current trimming value (as a percentage) of the 17.78 mA TX
+      reference current.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 79
+    maximum: 119
+    default: 100
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - enum:
+                - fsl,imx6q-usbphy
+                - fsl,imx6sl-usbphy
+                - fsl,imx6sx-usbphy
+                - fsl,imx6sll-usbphy
+                - fsl,vf610-usbphy
+            - items:
+                - const: fsl,imx6ul-usbphy
+                - const: fsl,imx23-usbphy
+    then:
+      required:
+        - fsl,anatop
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usbphy1: usb-phy@20c9000 {
+        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+        reg = <0x020c9000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,anatop = <&anatop>;
+    };
+
+...

Documentation/devicetree/bindings/phy/intel,combo-phy.yaml

@@ -15,7 +15,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "combophy(@.*|-[0-9a-f])*$"
+    pattern: "combophy(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   compatible:
     items:

Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml

@@ -32,15 +32,6 @@ properties:
   clock-names:
     const: phy_ref
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clock-parents:
-    maxItems: 1
-
-  assigned-clock-rates:
-    maxItems: 1
-
   "#phy-cells":
     const: 0
 

Documentation/devicetree/bindings/phy/mxs-usb-phy.txt

-* Freescale MXS USB Phy Device
-
-Required properties:
-- compatible: should contain:
-	* "fsl,imx23-usbphy" for imx23 and imx28
-	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
-	* "fsl,imx6sl-usbphy" for imx6sl
-	* "fsl,vf610-usbphy" for Vybrid vf610
-	* "fsl,imx6sx-usbphy" for imx6sx
-	* "fsl,imx7ulp-usbphy" for imx7ulp
-	* "fsl,imx8dxl-usbphy" for imx8dxl
-  "fsl,imx23-usbphy" is still a fallback for other strings
-- reg: Should contain registers location and length
-- interrupts: Should contain phy interrupt
-- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
-
-Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
-  high-speed trimming resistor connected in parallel with the 45 ohm resistor
-  that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
-  high-speed trimming resistor connected in parallel with the 45 ohm resistor
-  that terminates the DP output signal. Default: 45
-- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
-  the 17.78mA TX reference current. Default: 100
-
-Example:
-usbphy1: usb-phy@20c9000 {
-	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-	reg = <0x020c9000 0x1000>;
-	interrupts = <0 44 0x04>;
-	fsl,anatop = <&anatop>;
-};

Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml

@@ -43,6 +43,9 @@ properties:
   "#phy-cells":
     const: 0
 
+  power-domains:
+    maxItems: 1
+
   vdda-phy-supply: true
   vdda-pll-supply: true
 

Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml

@@ -203,6 +203,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc8180x-qmp-pcie-phy
               - qcom,sm8250-qmp-gen3x2-pcie-phy
               - qcom,sm8250-qmp-modem-pcie-phy
               - qcom,sm8450-qmp-gen4x2-pcie-phy
@@ -224,7 +225,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8180x-qmp-pcie-phy
               - qcom,sdm845-qmp-pcie-phy
               - qcom,sdx55-qmp-pcie-phy
               - qcom,sm8250-qmp-gen3x1-pcie-phy

Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml

@@ -160,6 +160,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
@@ -178,23 +179,6 @@ allOf:
                 - description: TX lane 2
                 - description: RX lane 2
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8180x-qmp-ufs-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX
-                - description: RX
-                - description: PCS
-                - description: PCS_MISC
-
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml

@@ -23,14 +23,12 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
       - qcom,msm8998-qmp-usb3-phy
-      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-phy
@@ -248,29 +246,6 @@ allOf:
             - const: phy
             - const: common
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,qcm2290-qmp-usb3-phy
-              - qcom,sm6115-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-        resets:
-          maxItems: 2
-        reset-names:
-          items:
-            - const: phy_phy
-            - const: phy
-
   - if:
       properties:
         compatible:
@@ -318,12 +293,10 @@ allOf:
             enum:
               - qcom,ipq6018-qmp-usb3-phy
               - qcom,ipq8074-qmp-usb3-phy
-              - qcom,qcm2290-qmp-usb3-phy
               - qcom,sc7180-qmp-usb3-phy
               - qcom,sc8180x-qmp-usb3-phy
               - qcom,sdx55-qmp-usb3-uni-phy
               - qcom,sdx65-qmp-usb3-uni-phy
-              - qcom,sm6115-qmp-usb3-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-phy
     then:

Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml

@@ -18,13 +18,14 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,ipq6018-qusb2-phy
               - qcom,ipq8074-qusb2-phy
+              - qcom,ipq9574-qusb2-phy
               - qcom,msm8953-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
               - qcom,qcm2290-qusb2-phy
               - qcom,sdm660-qusb2-phy
-              - qcom,ipq6018-qusb2-phy
               - qcom,sm4250-qusb2-phy
               - qcom,sm6115-qusb2-phy
       - items:

Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  The SerDes PHY sits between the MAC and the external PHY and provides
+  separate Rx Tx lines.
+
+properties:
+  compatible:
+    const: qcom,sa8775p-dwmac-sgmii-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sgmi_ref
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY.
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    serdes_phy: phy@8901000 {
+        compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+        reg = <0x08901000 0xe10>;
+        clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+        clock-names = "sgmi_ref";
+        #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

@@ -78,9 +78,9 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 3
+          minItems: 3
         clock-names:
-          maxItems: 3
+          minItems: 3
     else:
       properties:
         clocks:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -16,7 +16,11 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq9574-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sm6115-qmp-usb3-phy
 
   reg:
     maxItems: 1
@@ -25,11 +29,7 @@ properties:
     maxItems: 4
 
   clock-names:
-    items:
-      - const: aux
-      - const: ref
-      - const: com_aux
-      - const: pipe
+    maxItems: 4
 
   power-domains:
     maxItems: 1
@@ -60,7 +60,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -69,6 +68,60 @@ required:
   - clock-output-names
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-qmp-usb3-phy
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: com_aux
+            - const: pipe
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml

@@ -60,6 +60,26 @@ properties:
     description:
       See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
 
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the DisplayPort controller
+
 required:
   - compatible
   - reg
@@ -98,6 +118,37 @@ examples:
       vdda-phy-supply = <&vreg_l9d>;
       vdda-pll-supply = <&vreg_l4d>;
 
+      orientation-switch;
+
       #clock-cells = <1>;
       #phy-cells = <1>;
+
+      ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+              reg = <0>;
+
+              endpoint {
+                  remote-endpoint = <&typec_connector_ss>;
+              };
+          };
+
+          port@1 {
+              reg = <1>;
+
+              endpoint {
+                  remote-endpoint = <&dwc3_ss_out>;
+              };
+          };
+
+          port@2 {
+              reg = <2>;
+
+              endpoint {
+                  remote-endpoint = <&mdss_dp_out>;
+              };
+          };
+      };
     };

Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml

@@ -13,7 +13,9 @@ if:
   properties:
     compatible:
       contains:
-        const: qcom,usb-hs-phy-apq8064
+        enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8960
 then:
   properties:
     resets:
@@ -40,6 +42,7 @@ properties:
           - qcom,usb-hs-phy-apq8064
           - qcom,usb-hs-phy-msm8226
           - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8960
           - qcom,usb-hs-phy-msm8974
       - const: qcom,usb-hs-phy
 

Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml

@@ -20,6 +20,7 @@ properties:
           - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
+              - qcom,sa8775p-usb-hs-phy
               - qcom,sc8280xp-usb-hs-phy
           - const: qcom,usb-snps-hs-5nm-phy
       - items:

Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

@@ -24,6 +24,7 @@ properties:
           - qcom,msm8998-dwc3
           - qcom,qcm2290-dwc3
           - qcom,qcs404-dwc3
+          - qcom,sa8775p-dwc3
           - qcom,sc7180-dwc3
           - qcom,sc7280-dwc3
           - qcom,sc8280xp-dwc3
@@ -181,6 +182,7 @@ allOf:
               - qcom,msm8953-dwc3
               - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
+              - qcom,sa8775p-dwc3
               - qcom,sc7180-dwc3
               - qcom,sc7280-dwc3
               - qcom,sdm670-dwc3
@@ -456,6 +458,25 @@ allOf:
             - const: dm_hs_phy_irq
             - const: ss_phy_irq
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
 additionalProperties: false
 
 examples:

drivers/phy/amlogic/phy-meson-g12a-usb2.c

@@ -172,10 +172,16 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 	int ret;
 	unsigned int value;
 
-	ret = reset_control_reset(priv->reset);
+	ret = clk_prepare_enable(priv->clk);
 	if (ret)
 		return ret;
 
+	ret = reset_control_reset(priv->reset);
+	if (ret) {
+		clk_disable_unprepare(priv->clk);
+		return ret;
+	}
+
 	udelay(RESET_COMPLETE_TIME);
 
 	/* usb2_otg_aca_en == 0 */
@@ -277,8 +283,13 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 static int phy_meson_g12a_usb2_exit(struct phy *phy)
 {
 	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (!ret)
+		clk_disable_unprepare(priv->clk);
 
-	return reset_control_reset(priv->reset);
+	return ret;
 }
 
 /* set_mode is not needed, mode setting is handled via the UTMI bus */

drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c

@@ -59,6 +59,8 @@
 #define   USB_CTLR_TP_DIAG1_wake_MASK			BIT(1)
 #define USB_CTRL_CTLR_CSHCR		0x50
 #define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK		BIT(18)
+#define USB_CTRL_P0_U2PHY_CFG1		0x68
+#define   USB_CTRL_P0_U2PHY_CFG1_COMMONONN_MASK		BIT(10)
 
 /* Register definitions for the USB_PHY block in 7211b0 */
 #define USB_PHY_PLL_CTL			0x00
@@ -90,6 +92,8 @@
 #define   BDC_EC_AXIRDA_RTS_MASK			GENMASK(31, 28)
 #define   BDC_EC_AXIRDA_RTS_SHIFT			28
 
+#define USB_XHCI_GBL_GUSB2PHYCFG	0x100
+#define   USB_XHCI_GBL_GUSB2PHYCFG_U2_FREECLK_EXISTS_MASK	BIT(30)
 
 static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
 				  uint8_t addr, uint16_t data)
@@ -140,13 +144,17 @@ static void xhci_soft_reset(struct brcm_usb_init_params *params,
 			int on_off)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+	void __iomem *xhci_gbl = params->regs[BRCM_REGS_XHCI_GBL];
 
 	/* Assert reset */
-	if (on_off)
+	if (on_off) {
 		USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
 	/* De-assert reset */
-	else
+	} else {
 		USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
+		/* Required for COMMONONN to be set */
+		USB_XHCI_GBL_UNSET(xhci_gbl, GUSB2PHYCFG, U2_FREECLK_EXISTS);
+	}
 }
 
 static void usb_init_ipp(struct brcm_usb_init_params *params)
@@ -320,6 +328,9 @@ static void usb_init_common_7216(struct brcm_usb_init_params *params)
 	/* 1 millisecond - for USB clocks to settle down */
 	usleep_range(1000, 2000);
 
+	/* Disable PHY when port is suspended */
+	USB_CTRL_SET(ctrl, P0_U2PHY_CFG1, COMMONONN);
+
 	usb_wake_enable_7216(params, false);
 	usb_init_common(params);
 }

drivers/phy/broadcom/phy-brcm-usb-init.c

@@ -35,6 +35,11 @@
 #define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		BIT(25) /* option */
 #define   USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK	BIT(26) /* option */
 #define   USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK BIT(27) /* opt */
+#define   USB_CTRL_SETUP_OC_DISABLE_PORT0_MASK		BIT(28)
+#define   USB_CTRL_SETUP_OC_DISABLE_PORT1_MASK		BIT(29)
+#define   USB_CTRL_SETUP_OC_DISABLE_MASK		GENMASK(29, 28) /* option */
+#define   USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK		BIT(30)
+#define   USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK		BIT(31)
 #define   USB_CTRL_SETUP_OC3_DISABLE_MASK		GENMASK(31, 30) /* option */
 #define USB_CTRL_PLL_CTL		0x04
 #define   USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK		BIT(27)
@@ -114,6 +119,8 @@ enum {
 	USB_CTRL_SETUP_SCB2_EN_SELECTOR,
 	USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR,
 	USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR,
+	USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR,
+	USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR,
 	USB_CTRL_SETUP_OC3_DISABLE_SELECTOR,
 	USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR,
 	USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR,
@@ -190,6 +197,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
 		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
@@ -232,6 +241,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
 		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
@@ -253,6 +264,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
 		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
@@ -274,6 +287,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
 		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
@@ -295,6 +310,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
 		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
@@ -316,6 +333,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
 		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		0, /* USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK */
+		0, /* USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK */
 		0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
 		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
 		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
@@ -337,6 +356,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
 		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
@@ -358,6 +379,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		USB_CTRL_SETUP_SCB2_EN_MASK,
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
 		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
 		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
@@ -379,6 +402,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
 		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
 		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
 		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
@@ -400,6 +425,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
 		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
 		0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
 		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK,
 		USB_CTRL_SETUP_OC3_DISABLE_MASK,
 		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
 		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
@@ -872,6 +899,13 @@ static void usb_init_common(struct brcm_usb_init_params *params)
 
 	brcmusb_memc_fix(params);
 
+	/* Workaround for false positive OC for 7439b2 in DRD/Device mode */
+	if ((params->family_id == 0x74390012) &&
+	    (params->supported_port_modes != USB_CTLR_MODE_HOST)) {
+		USB_CTRL_SET(ctrl, SETUP, OC_DISABLE_PORT1);
+		USB_CTRL_SET_FAMILY(params, SETUP, OC3_DISABLE_PORT1);
+	}
+
 	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
 		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,

drivers/phy/broadcom/phy-brcm-usb-init.h

@@ -34,6 +34,14 @@ enum brcmusb_reg_sel {
 	brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg),		\
 			    USB_CTRL_##reg##_##field##_MASK)
 
+#define USB_XHCI_GBL_REG(base, reg) ((void __iomem *)base + USB_XHCI_GBL_##reg)
+#define USB_XHCI_GBL_SET(base, reg, field) \
+	brcm_usb_ctrl_set(USB_XHCI_GBL_REG(base, reg), \
+			  USB_XHCI_GBL_##reg##_##field##_MASK)
+#define USB_XHCI_GBL_UNSET(base, reg, field) \
+	brcm_usb_ctrl_unset(USB_XHCI_GBL_REG(base, reg), \
+			    USB_XHCI_GBL_##reg##_##field##_MASK)
+
 struct  brcm_usb_init_params;
 
 struct brcm_usb_init_ops {

drivers/phy/cadence/phy-cadence-salvo.c

@@ -6,6 +6,7 @@
  * Copyright (c) 2019-2020 NXP
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -15,7 +16,9 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
-/* PHY register definition */
+#define USB3_PHY_OFFSET			0x0
+#define USB2_PHY_OFFSET			0x38000
+/* USB3 PHY register definition */
 #define PHY_PMA_CMN_CTRL1			0xC800
 #define TB_ADDR_CMN_DIAG_HSCLK_SEL		0x01e0
 #define TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR	0x0084
@@ -87,8 +90,35 @@
 #define TB_ADDR_XCVR_DIAG_LANE_FCM_EN_MGN_TMR	0x40f2
 #define TB_ADDR_TX_RCVDETSC_CTRL	        0x4124
 
+/* USB2 PHY register definition */
+#define UTMI_REG15				0xaf
+#define UTMI_AFE_RX_REG0			0x0d
+#define UTMI_AFE_RX_REG5			0x12
+#define UTMI_AFE_BC_REG4			0x29
+
+/* Align UTMI_AFE_RX_REG0 bit[7:6] define */
+enum usb2_disconn_threshold {
+	USB2_DISCONN_THRESHOLD_575 = 0x0,
+	USB2_DISCONN_THRESHOLD_610 = 0x1,
+	USB2_DISCONN_THRESHOLD_645 = 0x3,
+};
+
+#define RX_USB2_DISCONN_MASK			GENMASK(7, 6)
+
 /* TB_ADDR_TX_RCVDETSC_CTRL */
 #define RXDET_IN_P3_32KHZ			BIT(0)
+/*
+ * UTMI_REG15
+ *
+ * Gate how many us for the txvalid signal until analog
+ * HS/FS transmitters have powered up
+ */
+#define TXVALID_GATE_THRESHOLD_HS_MASK		(BIT(4) | BIT(5))
+/* 0us, txvalid is ready just after HS/FS transmitters have powered up */
+#define TXVALID_GATE_THRESHOLD_HS_0US		(BIT(4) | BIT(5))
+
+#define SET_B_SESSION_VALID			(BIT(6) | BIT(5))
+#define CLR_B_SESSION_VALID			(BIT(6))
 
 struct cdns_reg_pairs {
 	u16 val;
@@ -106,19 +136,27 @@ struct cdns_salvo_phy {
 	struct clk *clk;
 	void __iomem *base;
 	struct cdns_salvo_data *data;
+	enum usb2_disconn_threshold usb2_disconn;
 };
 
 static const struct of_device_id cdns_salvo_phy_of_match[];
-static u16 cdns_salvo_read(struct cdns_salvo_phy *salvo_phy, u32 reg)
+static const struct cdns_salvo_data cdns_nxp_salvo_data;
+
+static bool cdns_is_nxp_phy(struct cdns_salvo_phy *salvo_phy)
+{
+	return salvo_phy->data == &cdns_nxp_salvo_data;
+}
+
+static u16 cdns_salvo_read(struct cdns_salvo_phy *salvo_phy, u32 offset, u32 reg)
 {
-	return (u16)readl(salvo_phy->base +
+	return (u16)readl(salvo_phy->base + offset +
 		reg * (1 << salvo_phy->data->reg_offset_shift));
 }
 
-static void cdns_salvo_write(struct cdns_salvo_phy *salvo_phy,
+static void cdns_salvo_write(struct cdns_salvo_phy *salvo_phy, u32 offset,
 			     u32 reg, u16 val)
 {
-	writel(val, salvo_phy->base +
+	writel(val, salvo_phy->base + offset +
 		reg * (1 << salvo_phy->data->reg_offset_shift));
 }
 
@@ -219,15 +257,27 @@ static int cdns_salvo_phy_init(struct phy *phy)
 	for (i = 0; i < data->init_sequence_length; i++) {
 		const struct cdns_reg_pairs *reg_pair = data->init_sequence_val + i;
 
-		cdns_salvo_write(salvo_phy, reg_pair->off, reg_pair->val);
+		cdns_salvo_write(salvo_phy, USB3_PHY_OFFSET, reg_pair->off, reg_pair->val);
 	}
 
 	/* RXDET_IN_P3_32KHZ, Receiver detect slow clock enable */
-	value = cdns_salvo_read(salvo_phy, TB_ADDR_TX_RCVDETSC_CTRL);
+	value = cdns_salvo_read(salvo_phy, USB3_PHY_OFFSET, TB_ADDR_TX_RCVDETSC_CTRL);
 	value |= RXDET_IN_P3_32KHZ;
-	cdns_salvo_write(salvo_phy, TB_ADDR_TX_RCVDETSC_CTRL,
+	cdns_salvo_write(salvo_phy, USB3_PHY_OFFSET, TB_ADDR_TX_RCVDETSC_CTRL,
 			 RXDET_IN_P3_32KHZ);
 
+	value = cdns_salvo_read(salvo_phy, USB2_PHY_OFFSET, UTMI_REG15);
+	value &= ~TXVALID_GATE_THRESHOLD_HS_MASK;
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_REG15,
+			 value | TXVALID_GATE_THRESHOLD_HS_0US);
+
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG5, 0x5);
+
+	value = cdns_salvo_read(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0);
+	value &= ~RX_USB2_DISCONN_MASK;
+	value = FIELD_PREP(RX_USB2_DISCONN_MASK, salvo_phy->usb2_disconn);
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0, value);
+
 	udelay(10);
 
 	clk_disable_unprepare(salvo_phy->clk);
@@ -251,11 +301,29 @@ static int cdns_salvo_phy_power_off(struct phy *phy)
 	return 0;
 }
 
+static int cdns_salvo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct cdns_salvo_phy *salvo_phy = phy_get_drvdata(phy);
+
+	if (!cdns_is_nxp_phy(salvo_phy))
+		return 0;
+
+	if (mode == PHY_MODE_USB_DEVICE)
+		cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_BC_REG4,
+			 SET_B_SESSION_VALID);
+	else
+		cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_BC_REG4,
+			 CLR_B_SESSION_VALID);
+
+	return 0;
+}
+
 static const struct phy_ops cdns_salvo_phy_ops = {
 	.init		= cdns_salvo_phy_init,
 	.power_on	= cdns_salvo_phy_power_on,
 	.power_off	= cdns_salvo_phy_power_off,
 	.owner		= THIS_MODULE,
+	.set_mode	= cdns_salvo_set_mode,
 };
 
 static int cdns_salvo_phy_probe(struct platform_device *pdev)
@@ -264,6 +332,7 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct cdns_salvo_phy *salvo_phy;
 	struct cdns_salvo_data *data;
+	u32 val;
 
 	data = (struct cdns_salvo_data *)of_device_get_match_data(dev);
 	salvo_phy = devm_kzalloc(dev, sizeof(*salvo_phy), GFP_KERNEL);
@@ -275,6 +344,16 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(salvo_phy->clk))
 		return PTR_ERR(salvo_phy->clk);
 
+	if (of_property_read_u32(dev->of_node, "cdns,usb2-disconnect-threshold-microvolt", &val))
+		val = 575;
+
+	if (val < 610)
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_575;
+	else if (val < 645)
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_610;
+	else
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_645;
+
 	salvo_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(salvo_phy->base))
 		return PTR_ERR(salvo_phy->base);

drivers/phy/freescale/phy-fsl-imx8m-pcie.c

@@ -206,7 +206,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct imx8_pcie_phy *imx8_phy;
-	struct resource *res;
 
 	imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL);
 	if (!imx8_phy)
@@ -259,8 +258,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 				      "Failed to get PCIE PHY PERST control\n");
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	imx8_phy->base = devm_ioremap_resource(dev, res);
+	imx8_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(imx8_phy->base))
 		return PTR_ERR(imx8_phy->base);
 

drivers/phy/freescale/phy-fsl-imx8mq-usb.c

@@ -27,17 +27,231 @@
 #define PHY_CTRL2_TXENABLEN0		BIT(8)
 #define PHY_CTRL2_OTG_DISABLE		BIT(9)
 
+#define PHY_CTRL3			0xc
+#define PHY_CTRL3_COMPDISTUNE_MASK	GENMASK(2, 0)
+#define PHY_CTRL3_TXPREEMP_TUNE_MASK	GENMASK(16, 15)
+#define PHY_CTRL3_TXRISE_TUNE_MASK	GENMASK(21, 20)
+#define PHY_CTRL3_TXVREF_TUNE_MASK	GENMASK(25, 22)
+#define PHY_CTRL3_TX_VBOOST_LEVEL_MASK	GENMASK(31, 29)
+
+#define PHY_CTRL4			0x10
+#define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK	GENMASK(20, 15)
+
+#define PHY_CTRL5			0x14
+#define PHY_CTRL5_DMPWD_OVERRIDE_SEL	BIT(23)
+#define PHY_CTRL5_DMPWD_OVERRIDE	BIT(22)
+#define PHY_CTRL5_DPPWD_OVERRIDE_SEL	BIT(21)
+#define PHY_CTRL5_DPPWD_OVERRIDE	BIT(20)
+#define PHY_CTRL5_PCS_TX_SWING_FULL_MASK	GENMASK(6, 0)
+
 #define PHY_CTRL6			0x18
 #define PHY_CTRL6_ALT_CLK_EN		BIT(1)
 #define PHY_CTRL6_ALT_CLK_SEL		BIT(0)
 
+#define PHY_TUNE_DEFAULT		0xffffffff
+
 struct imx8mq_usb_phy {
 	struct phy *phy;
 	struct clk *clk;
 	void __iomem *base;
 	struct regulator *vbus;
+	u32 pcs_tx_swing_full;
+	u32 pcs_tx_deemph_3p5db;
+	u32 tx_vref_tune;
+	u32 tx_rise_tune;
+	u32 tx_preemp_amp_tune;
+	u32 tx_vboost_level;
+	u32 comp_dis_tune;
 };
 
+static u32 phy_tx_vref_tune_from_property(u32 percent)
+{
+	percent = clamp(percent, 94U, 124U);
+
+	return DIV_ROUND_CLOSEST(percent - 94U, 2);
+}
+
+static u32 phy_tx_rise_tune_from_property(u32 percent)
+{
+	switch (percent) {
+	case 0 ... 98:
+		return 3;
+	case 99:
+		return 2;
+	case 100 ... 101:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static u32 phy_tx_preemp_amp_tune_from_property(u32 microamp)
+{
+	microamp = min(microamp, 1800U);
+
+	return microamp / 600;
+}
+
+static u32 phy_tx_vboost_level_from_property(u32 microvolt)
+{
+	switch (microvolt) {
+	case 0 ... 960:
+		return 0;
+	case 961 ... 1160:
+		return 2;
+	default:
+		return 3;
+	}
+}
+
+static u32 phy_pcs_tx_deemph_3p5db_from_property(u32 decibel)
+{
+	return min(decibel, 36U);
+}
+
+static u32 phy_comp_dis_tune_from_property(u32 percent)
+{
+	switch (percent) {
+	case 0 ... 92:
+		return 0;
+	case 93 ... 95:
+		return 1;
+	case 96 ... 97:
+		return 2;
+	case 98 ... 102:
+		return 3;
+	case 103 ... 105:
+		return 4;
+	case 106 ... 109:
+		return 5;
+	case 110 ... 113:
+		return 6;
+	default:
+		return 7;
+	}
+}
+static u32 phy_pcs_tx_swing_full_from_property(u32 percent)
+{
+	percent = min(percent, 100U);
+
+	return (percent * 127) / 100;
+}
+
+static void imx8m_get_phy_tuning_data(struct imx8mq_usb_phy *imx_phy)
+{
+	struct device *dev = imx_phy->phy->dev.parent;
+
+	if (device_property_read_u32(dev, "fsl,phy-tx-vref-tune-percent",
+				     &imx_phy->tx_vref_tune))
+		imx_phy->tx_vref_tune = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->tx_vref_tune =
+			phy_tx_vref_tune_from_property(imx_phy->tx_vref_tune);
+
+	if (device_property_read_u32(dev, "fsl,phy-tx-rise-tune-percent",
+				     &imx_phy->tx_rise_tune))
+		imx_phy->tx_rise_tune = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->tx_rise_tune =
+			phy_tx_rise_tune_from_property(imx_phy->tx_rise_tune);
+
+	if (device_property_read_u32(dev, "fsl,phy-tx-preemp-amp-tune-microamp",
+				     &imx_phy->tx_preemp_amp_tune))
+		imx_phy->tx_preemp_amp_tune = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->tx_preemp_amp_tune =
+			phy_tx_preemp_amp_tune_from_property(imx_phy->tx_preemp_amp_tune);
+
+	if (device_property_read_u32(dev, "fsl,phy-tx-vboost-level-microvolt",
+				     &imx_phy->tx_vboost_level))
+		imx_phy->tx_vboost_level = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->tx_vboost_level =
+			phy_tx_vboost_level_from_property(imx_phy->tx_vboost_level);
+
+	if (device_property_read_u32(dev, "fsl,phy-comp-dis-tune-percent",
+				     &imx_phy->comp_dis_tune))
+		imx_phy->comp_dis_tune = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->comp_dis_tune =
+			phy_comp_dis_tune_from_property(imx_phy->comp_dis_tune);
+
+	if (device_property_read_u32(dev, "fsl,pcs-tx-deemph-3p5db-attenuation-db",
+				     &imx_phy->pcs_tx_deemph_3p5db))
+		imx_phy->pcs_tx_deemph_3p5db = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->pcs_tx_deemph_3p5db =
+			phy_pcs_tx_deemph_3p5db_from_property(imx_phy->pcs_tx_deemph_3p5db);
+
+	if (device_property_read_u32(dev, "fsl,phy-pcs-tx-swing-full-percent",
+				     &imx_phy->pcs_tx_swing_full))
+		imx_phy->pcs_tx_swing_full = PHY_TUNE_DEFAULT;
+	else
+		imx_phy->pcs_tx_swing_full =
+			phy_pcs_tx_swing_full_from_property(imx_phy->pcs_tx_swing_full);
+}
+
+static void imx8m_phy_tune(struct imx8mq_usb_phy *imx_phy)
+{
+	u32 value;
+
+	/* PHY tuning */
+	if (imx_phy->pcs_tx_deemph_3p5db != PHY_TUNE_DEFAULT) {
+		value = readl(imx_phy->base + PHY_CTRL4);
+		value &= ~PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK;
+		value |= FIELD_PREP(PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK,
+				   imx_phy->pcs_tx_deemph_3p5db);
+		writel(value, imx_phy->base + PHY_CTRL4);
+	}
+
+	if (imx_phy->pcs_tx_swing_full != PHY_TUNE_DEFAULT) {
+		value = readl(imx_phy->base + PHY_CTRL5);
+		value |= FIELD_PREP(PHY_CTRL5_PCS_TX_SWING_FULL_MASK,
+				   imx_phy->pcs_tx_swing_full);
+		writel(value, imx_phy->base + PHY_CTRL5);
+	}
+
+	if ((imx_phy->tx_vref_tune & imx_phy->tx_rise_tune &
+	     imx_phy->tx_preemp_amp_tune & imx_phy->comp_dis_tune &
+	     imx_phy->tx_vboost_level) == PHY_TUNE_DEFAULT)
+		/* If all are the default values, no need update. */
+		return;
+
+	value = readl(imx_phy->base + PHY_CTRL3);
+
+	if (imx_phy->tx_vref_tune != PHY_TUNE_DEFAULT) {
+		value &= ~PHY_CTRL3_TXVREF_TUNE_MASK;
+		value |= FIELD_PREP(PHY_CTRL3_TXVREF_TUNE_MASK,
+				   imx_phy->tx_vref_tune);
+	}
+
+	if (imx_phy->tx_rise_tune != PHY_TUNE_DEFAULT) {
+		value &= ~PHY_CTRL3_TXRISE_TUNE_MASK;
+		value |= FIELD_PREP(PHY_CTRL3_TXRISE_TUNE_MASK,
+				    imx_phy->tx_rise_tune);
+	}
+
+	if (imx_phy->tx_preemp_amp_tune != PHY_TUNE_DEFAULT) {
+		value &= ~PHY_CTRL3_TXPREEMP_TUNE_MASK;
+		value |= FIELD_PREP(PHY_CTRL3_TXPREEMP_TUNE_MASK,
+				imx_phy->tx_preemp_amp_tune);
+	}
+
+	if (imx_phy->comp_dis_tune != PHY_TUNE_DEFAULT) {
+		value &= ~PHY_CTRL3_COMPDISTUNE_MASK;
+		value |= FIELD_PREP(PHY_CTRL3_COMPDISTUNE_MASK,
+				    imx_phy->comp_dis_tune);
+	}
+
+	if (imx_phy->tx_vboost_level != PHY_TUNE_DEFAULT) {
+		value &= ~PHY_CTRL3_TX_VBOOST_LEVEL_MASK;
+		value |= FIELD_PREP(PHY_CTRL3_TX_VBOOST_LEVEL_MASK,
+				    imx_phy->tx_vboost_level);
+	}
+
+	writel(value, imx_phy->base + PHY_CTRL3);
+}
+
 static int imx8mq_usb_phy_init(struct phy *phy)
 {
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
@@ -99,6 +313,8 @@ static int imx8mp_usb_phy_init(struct phy *phy)
 	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
 	writel(value, imx_phy->base + PHY_CTRL1);
 
+	imx8m_phy_tune(imx_phy);
+
 	return 0;
 }
 
@@ -182,6 +398,8 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 
 	phy_set_drvdata(imx_phy->phy, imx_phy);
 
+	imx8m_get_phy_tuning_data(imx_phy);
+
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 
 	return PTR_ERR_OR_ZERO(phy_provider);

drivers/phy/hisilicon/Kconfig

@@ -54,7 +54,7 @@ config PHY_HISTB_COMBPHY
 
 config PHY_HISI_INNO_USB2
 	tristate "HiSilicon INNO USB2 PHY support"
-	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	depends on ARCH_HISI || COMPILE_TEST
 	select GENERIC_PHY
 	select MFD_SYSCON
 	help

drivers/phy/hisilicon/phy-hisi-inno-usb2.c

@@ -9,7 +9,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/platform_device.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/reset.h>
 
@@ -20,12 +20,25 @@
 #define PHY_CLK_STABLE_TIME	2	/* unit:ms */
 #define UTMI_RST_COMPLETE_TIME	2	/* unit:ms */
 #define POR_RST_COMPLETE_TIME	300	/* unit:us */
+
+#define PHY_TYPE_0	0
+#define PHY_TYPE_1	1
+
 #define PHY_TEST_DATA		GENMASK(7, 0)
-#define PHY_TEST_ADDR		GENMASK(15, 8)
-#define PHY_TEST_PORT		GENMASK(18, 16)
-#define PHY_TEST_WREN		BIT(21)
-#define PHY_TEST_CLK		BIT(22)	/* rising edge active */
-#define PHY_TEST_RST		BIT(23)	/* low active */
+#define PHY_TEST_ADDR_OFFSET	8
+#define PHY0_TEST_ADDR		GENMASK(15, 8)
+#define PHY0_TEST_PORT_OFFSET	16
+#define PHY0_TEST_PORT		GENMASK(18, 16)
+#define PHY0_TEST_WREN		BIT(21)
+#define PHY0_TEST_CLK		BIT(22)	/* rising edge active */
+#define PHY0_TEST_RST		BIT(23)	/* low active */
+#define PHY1_TEST_ADDR		GENMASK(11, 8)
+#define PHY1_TEST_PORT_OFFSET	12
+#define PHY1_TEST_PORT		BIT(12)
+#define PHY1_TEST_WREN		BIT(13)
+#define PHY1_TEST_CLK		BIT(14)	/* rising edge active */
+#define PHY1_TEST_RST		BIT(15)	/* low active */
+
 #define PHY_CLK_ENABLE		BIT(2)
 
 struct hisi_inno_phy_port {
@@ -37,6 +50,7 @@ struct hisi_inno_phy_priv {
 	void __iomem *mmio;
 	struct clk *ref_clk;
 	struct reset_control *por_rst;
+	unsigned int type;
 	struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
 };
 
@@ -45,17 +59,27 @@ static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
 {
 	void __iomem *reg = priv->mmio;
 	u32 val;
-
-	val = (data & PHY_TEST_DATA) |
-	      ((addr << 8) & PHY_TEST_ADDR) |
-	      ((port << 16) & PHY_TEST_PORT) |
-	      PHY_TEST_WREN | PHY_TEST_RST;
+	u32 value;
+
+	if (priv->type == PHY_TYPE_0)
+		val = (data & PHY_TEST_DATA) |
+		      ((addr << PHY_TEST_ADDR_OFFSET) & PHY0_TEST_ADDR) |
+		      ((port << PHY0_TEST_PORT_OFFSET) & PHY0_TEST_PORT) |
+		      PHY0_TEST_WREN | PHY0_TEST_RST;
+	else
+		val = (data & PHY_TEST_DATA) |
+		      ((addr << PHY_TEST_ADDR_OFFSET) & PHY1_TEST_ADDR) |
+		      ((port << PHY1_TEST_PORT_OFFSET) & PHY1_TEST_PORT) |
+		      PHY1_TEST_WREN | PHY1_TEST_RST;
 	writel(val, reg);
 
-	val |= PHY_TEST_CLK;
-	writel(val, reg);
+	value = val;
+	if (priv->type == PHY_TYPE_0)
+		value |= PHY0_TEST_CLK;
+	else
+		value |= PHY1_TEST_CLK;
+	writel(value, reg);
 
-	val &= ~PHY_TEST_CLK;
 	writel(val, reg);
 }
 
@@ -135,6 +159,8 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->por_rst))
 		return PTR_ERR(priv->por_rst);
 
+	priv->type = (uintptr_t) of_device_get_match_data(dev);
+
 	for_each_child_of_node(np, child) {
 		struct reset_control *rst;
 		struct phy *phy;
@@ -170,8 +196,12 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id hisi_inno_phy_of_match[] = {
-	{ .compatible = "hisilicon,inno-usb2-phy", },
-	{ .compatible = "hisilicon,hi3798cv200-usb2-phy", },
+	{ .compatible = "hisilicon,inno-usb2-phy",
+	  .data = (void *) PHY_TYPE_0 },
+	{ .compatible = "hisilicon,hi3798cv200-usb2-phy",
+	  .data = (void *) PHY_TYPE_0 },
+	{ .compatible = "hisilicon,hi3798mv100-usb2-phy",
+	  .data = (void *) PHY_TYPE_1 },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);

drivers/phy/mediatek/phy-mtk-tphy.c

@@ -7,6 +7,7 @@
 
 #include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
@@ -264,6 +265,8 @@
 
 #define TPHY_CLKS_CNT	2
 
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
 enum mtk_phy_version {
 	MTK_PHY_V1 = 1,
 	MTK_PHY_V2,
@@ -336,6 +339,358 @@ struct mtk_tphy {
 	int src_coef; /* coefficient for slew rate calibrate */
 };
 
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+
+enum u2_phy_params {
+	U2P_EYE_VRT = 0,
+	U2P_EYE_TERM,
+	U2P_EFUSE_EN,
+	U2P_EFUSE_INTR,
+	U2P_DISCTH,
+	U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+	U3P_EFUSE_EN = 0,
+	U3P_EFUSE_INTR,
+	U3P_EFUSE_TX_IMP,
+	U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+	[U2P_EYE_VRT] = "vrt",
+	[U2P_EYE_TERM] = "term",
+	[U2P_EFUSE_EN] = "efuse",
+	[U2P_EFUSE_INTR] = "intr",
+	[U2P_DISCTH] = "discth",
+	[U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+	[U3P_EFUSE_EN] = "efuse",
+	[U3P_EFUSE_INTR] = "intr",
+	[U3P_EFUSE_TX_IMP] = "tx-imp",
+	[U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 max = 0;
+	u32 tmp = 0;
+	u32 val = 0;
+	int ret;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_VRT_SEL);
+		break;
+
+	case U2P_EYE_TERM:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_TERM_SEL);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc) {
+			tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+			max = 1;
+		}
+
+		val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+		break;
+
+	case U2P_EFUSE_INTR:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+		max = FIELD_MAX(PA1_RG_INTR_CAL);
+		break;
+
+	case U2P_DISCTH:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+		max = FIELD_MAX(PA6_RG_U2_DISCTH);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+		max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+		break;
+
+	case U2P_EYE_TERM:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc)
+			mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+					     MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U2P_EFUSE_INTR:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+		break;
+
+	case U2P_DISCTH:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+	.open = u2_phy_params_open,
+	.write = u2_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u2_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u2_phy_files[i], 0644, inst->phy->debugfs,
+				    inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	u32 val = 0;
+	u32 max = 0;
+	u32 tmp;
+	int ret;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+		val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+		max = 1;
+		break;
+
+	case U3P_EFUSE_INTR:
+		tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+		val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+		max = FIELD_MAX(P3A_RG_IEXT_INTR);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+		val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+		val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_RX_IMPEL);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+				     P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U3P_EFUSE_INTR:
+		mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0,
+				     P3A_RG_IEXT_INTR, val);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+	.open = u3_phy_params_open,
+	.write = u3_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u3_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u3_phy_files[i], 0644, inst->phy->debugfs,
+				    inst, &u3_phy_fops);
+}
+
+static int phy_type_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *type;
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		type = "USB2";
+		break;
+	case PHY_TYPE_USB3:
+		type = "USB3";
+		break;
+	case PHY_TYPE_PCIE:
+		type = "PCIe";
+		break;
+	case PHY_TYPE_SGMII:
+		type = "SGMII";
+		break;
+	case PHY_TYPE_SATA:
+		type = "SATA";
+		break;
+	default:
+		type = "";
+	}
+
+	seq_printf(sf, "%s\n", type);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(phy_type);
+
+/* these files will be removed when phy is released by phy core */
+static void phy_debugfs_init(struct mtk_phy_instance *inst)
+{
+	debugfs_create_file("type", 0444, inst->phy->debugfs, inst, &phy_type_fops);
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_dbgfs_files_create(inst);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_phy_dbgfs_files_create(inst);
+		break;
+	default:
+		break;
+	}
+}
+
+#else
+
+static void phy_debugfs_init(struct mtk_phy_instance *inst)
+{}
+
+#endif
+
 static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
 	struct mtk_phy_instance *instance)
 {
@@ -1140,6 +1495,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
 
 	phy_parse_property(tphy, instance);
 	phy_type_set(instance);
+	phy_debugfs_init(instance);
 
 	return instance->phy;
 }

drivers/phy/microchip/sparx5_serdes.h

@@ -30,7 +30,6 @@ struct sparx5_serdes_private {
 	struct device *dev;
 	void __iomem *regs[NUM_TARGETS];
 	struct phy *phys[SPX5_SERDES_MAX];
-	bool cmu_enabled;
 	unsigned long coreclock;
 };
 

drivers/phy/microchip/sparx5_serdes_regs.h

@@ -2149,6 +2149,92 @@ enum sparx5_serdes_target {
 #define SD_CMU_CMU_05_CFG_BIAS_TP_SEL_1_0_GET(x)\
 	FIELD_GET(SD_CMU_CMU_05_CFG_BIAS_TP_SEL_1_0, x)
 
+/*      SD10G_CMU_TARGET:CMU_GRP_1:CMU_06 */
+#define SD_CMU_CMU_06(t) \
+	__REG(TARGET_SD_CMU, t, 14, 20, 0, 1, 72, 4, 0, 1, 4)
+
+#define SD_CMU_CMU_06_CFG_DISLOS                 BIT(0)
+#define SD_CMU_CMU_06_CFG_DISLOS_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_DISLOS, x)
+#define SD_CMU_CMU_06_CFG_DISLOS_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_DISLOS, x)
+
+#define SD_CMU_CMU_06_CFG_DISLOL                 BIT(1)
+#define SD_CMU_CMU_06_CFG_DISLOL_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_DISLOL, x)
+#define SD_CMU_CMU_06_CFG_DISLOL_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_DISLOL, x)
+
+#define SD_CMU_CMU_06_CFG_DCLOL                  BIT(2)
+#define SD_CMU_CMU_06_CFG_DCLOL_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_DCLOL, x)
+#define SD_CMU_CMU_06_CFG_DCLOL_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_DCLOL, x)
+
+#define SD_CMU_CMU_06_CFG_FORCE_RX_FILT          BIT(3)
+#define SD_CMU_CMU_06_CFG_FORCE_RX_FILT_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_FORCE_RX_FILT, x)
+#define SD_CMU_CMU_06_CFG_FORCE_RX_FILT_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_FORCE_RX_FILT, x)
+
+#define SD_CMU_CMU_06_CFG_CTRL_LOGIC_PD          BIT(4)
+#define SD_CMU_CMU_06_CFG_CTRL_LOGIC_PD_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_CTRL_LOGIC_PD, x)
+#define SD_CMU_CMU_06_CFG_CTRL_LOGIC_PD_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_CTRL_LOGIC_PD, x)
+
+#define SD_CMU_CMU_06_CFG_VCO_PD                 BIT(5)
+#define SD_CMU_CMU_06_CFG_VCO_PD_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_VCO_PD, x)
+#define SD_CMU_CMU_06_CFG_VCO_PD_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_VCO_PD, x)
+
+#define SD_CMU_CMU_06_CFG_VCO_CAL_RESETN         BIT(6)
+#define SD_CMU_CMU_06_CFG_VCO_CAL_RESETN_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_VCO_CAL_RESETN, x)
+#define SD_CMU_CMU_06_CFG_VCO_CAL_RESETN_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_VCO_CAL_RESETN, x)
+
+#define SD_CMU_CMU_06_CFG_VCO_CAL_BYP            BIT(7)
+#define SD_CMU_CMU_06_CFG_VCO_CAL_BYP_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_06_CFG_VCO_CAL_BYP, x)
+#define SD_CMU_CMU_06_CFG_VCO_CAL_BYP_GET(x)\
+	FIELD_GET(SD_CMU_CMU_06_CFG_VCO_CAL_BYP, x)
+
+/*      SD10G_CMU_TARGET:CMU_GRP_1:CMU_08 */
+#define SD_CMU_CMU_08(t) \
+	__REG(TARGET_SD_CMU, t, 14, 20, 0, 1, 72, 12, 0, 1, 4)
+
+#define SD_CMU_CMU_08_CFG_VFILT2PAD              BIT(0)
+#define SD_CMU_CMU_08_CFG_VFILT2PAD_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_08_CFG_VFILT2PAD, x)
+#define SD_CMU_CMU_08_CFG_VFILT2PAD_GET(x)\
+	FIELD_GET(SD_CMU_CMU_08_CFG_VFILT2PAD, x)
+
+#define SD_CMU_CMU_08_CFG_EN_DUMMY               BIT(1)
+#define SD_CMU_CMU_08_CFG_EN_DUMMY_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_08_CFG_EN_DUMMY, x)
+#define SD_CMU_CMU_08_CFG_EN_DUMMY_GET(x)\
+	FIELD_GET(SD_CMU_CMU_08_CFG_EN_DUMMY, x)
+
+#define SD_CMU_CMU_08_CFG_CK_TREE_PD             BIT(2)
+#define SD_CMU_CMU_08_CFG_CK_TREE_PD_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_08_CFG_CK_TREE_PD, x)
+#define SD_CMU_CMU_08_CFG_CK_TREE_PD_GET(x)\
+	FIELD_GET(SD_CMU_CMU_08_CFG_CK_TREE_PD, x)
+
+#define SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN        BIT(3)
+#define SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN, x)
+#define SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_GET(x)\
+	FIELD_GET(SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN, x)
+
+#define SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_EN     BIT(4)
+#define SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_EN_SET(x)\
+	FIELD_PREP(SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_EN, x)
+#define SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_EN_GET(x)\
+	FIELD_GET(SD_CMU_CMU_08_CFG_RST_TREE_PD_MAN_EN, x)
+
 /*      SD10G_CMU_TARGET:CMU_GRP_1:CMU_09 */
 #define SD_CMU_CMU_09(t)          __REG(TARGET_SD_CMU, t, 14, 20, 0, 1, 72, 16, 0, 1, 4)
 
@@ -2443,6 +2529,16 @@ enum sparx5_serdes_target {
 #define SD_LANE_SD_LANE_STAT_DBG_OBS_GET(x)\
 	FIELD_GET(SD_LANE_SD_LANE_STAT_DBG_OBS, x)
 
+/*      SD_LANE_TARGET:SD_PWR_CFG:QUIET_MODE_6G */
+#define SD_LANE_QUIET_MODE_6G(t) \
+	__REG(TARGET_SD_LANE, t, 25, 24, 0, 1, 8, 4, 0, 1, 4)
+
+#define SD_LANE_QUIET_MODE_6G_QUIET_MODE         GENMASK(24, 0)
+#define SD_LANE_QUIET_MODE_6G_QUIET_MODE_SET(x)\
+	FIELD_PREP(SD_LANE_QUIET_MODE_6G_QUIET_MODE, x)
+#define SD_LANE_QUIET_MODE_6G_QUIET_MODE_GET(x)\
+	FIELD_GET(SD_LANE_QUIET_MODE_6G_QUIET_MODE, x)
+
 /*      SD_LANE_TARGET:CFG_STAT_FX100:MISC */
 #define SD_LANE_MISC(t)           __REG(TARGET_SD_LANE, t, 25, 56, 0, 1, 56, 0, 0, 1, 4)
 
@@ -2692,4 +2788,14 @@ enum sparx5_serdes_target {
 #define SD_LANE_25G_SD_LANE_STAT_DBG_OBS_GET(x)\
 	FIELD_GET(SD_LANE_25G_SD_LANE_STAT_DBG_OBS, x)
 
+/*      SD25G_CFG_TARGET:SD_PWR_CFG:QUIET_MODE_6G */
+#define SD_LANE_25G_QUIET_MODE_6G(t) \
+	__REG(TARGET_SD_LANE_25G, t, 8, 28, 0, 1, 8, 4, 0, 1, 4)
+
+#define SD_LANE_25G_QUIET_MODE_6G_QUIET_MODE     GENMASK(24, 0)
+#define SD_LANE_25G_QUIET_MODE_6G_QUIET_MODE_SET(x)\
+	FIELD_PREP(SD_LANE_25G_QUIET_MODE_6G_QUIET_MODE, x)
+#define SD_LANE_25G_QUIET_MODE_6G_QUIET_MODE_GET(x)\
+	FIELD_GET(SD_LANE_25G_QUIET_MODE_6G_QUIET_MODE, x)
+
 #endif /* _SPARX5_SERDES_REGS_H_ */

drivers/phy/phy-core.c

@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
@@ -20,6 +21,7 @@
 #include <linux/regulator/consumer.h>
 
 static struct class *phy_class;
+static struct dentry *phy_debugfs_root;
 static DEFINE_MUTEX(phy_provider_mutex);
 static LIST_HEAD(phy_provider_list);
 static LIST_HEAD(phys);
@@ -996,6 +998,8 @@ struct phy *phy_create(struct device *dev, struct device_node *node,
 		pm_runtime_no_callbacks(&phy->dev);
 	}
 
+	phy->debugfs = debugfs_create_dir(dev_name(&phy->dev), phy_debugfs_root);
+
 	return phy;
 
 put_dev:
@@ -1226,6 +1230,7 @@ static void phy_release(struct device *dev)
 
 	phy = to_phy(dev);
 	dev_vdbg(dev, "releasing '%s'\n", dev_name(dev));
+	debugfs_remove_recursive(phy->debugfs);
 	regulator_put(phy->pwr);
 	ida_simple_remove(&phy_ida, phy->id);
 	kfree(phy);
@@ -1242,6 +1247,15 @@ static int __init phy_core_init(void)
 
 	phy_class->dev_release = phy_release;
 
+	phy_debugfs_root = debugfs_create_dir("phy", NULL);
+
 	return 0;
 }
 device_initcall(phy_core_init);
+
+static void __exit phy_core_exit(void)
+{
+	debugfs_remove_recursive(phy_debugfs_root);
+	class_destroy(phy_class);
+}
+module_exit(phy_core_exit);

drivers/phy/qualcomm/Kconfig

@@ -59,8 +59,11 @@ if PHY_QCOM_QMP
 config PHY_QCOM_QMP_COMBO
 	tristate "Qualcomm QMP Combo PHY Driver"
 	default PHY_QCOM_QMP
+	depends on TYPEC || TYPEC=n
+	depends on DRM || DRM=n
 	select GENERIC_PHY
 	select MFD_SYSCON
+	select DRM_PANEL_BRIDGE if DRM
 	help
 	  Enable this to support the QMP Combo PHY transceiver that is used
 	  with USB3 and DisplayPort controllers on Qualcomm chips.
@@ -185,3 +188,12 @@ config PHY_QCOM_IPQ806X_USB
 	  This option enables support for the Synopsis PHYs present inside the
 	  Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
 	  both HS and SS PHY controllers.
+
+config PHY_QCOM_SGMII_ETH
+	tristate "Qualcomm DWMAC SGMII SerDes/PHY driver"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the internal SerDes/SGMII PHY on various
+	  Qualcomm chipsets.

drivers/phy/qualcomm/Makefile

@@ -20,4 +20,5 @@ obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
 obj-$(CONFIG_PHY_QCOM_USB_HS_28NM)	+= phy-qcom-usb-hs-28nm.o
 obj-$(CONFIG_PHY_QCOM_USB_SS)		+= phy-qcom-usb-ss.o
 obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_USB)		+= phy-qcom-ipq806x-usb.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_USB)	+= phy-qcom-ipq806x-usb.o
+obj-$(CONFIG_PHY_QCOM_SGMII_ETH)	+= phy-qcom-sgmii-eth.o

drivers/phy/qualcomm/phy-qcom-qmp-usb.c

@@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
+static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	/* PLL and Loop filter settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	/* SSC settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1408,12 +1490,36 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
 };
 
+static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG2, 0x89),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG5, 0x10),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
 struct qmp_usb_offsets {
 	u16 serdes;
 	u16 pcs;
+	u16 pcs_misc;
 	u16 pcs_usb;
 	u16 tx;
 	u16 rx;
+	/* for PHYs with >= 2 lanes */
+	u16 tx2;
+	u16 rx2;
 };
 
 /* struct qmp_phy_cfg - per-PHY initialization config */
@@ -1558,6 +1664,24 @@ static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
+	.serdes		= 0,
+	.pcs		= 0x800,
+	.pcs_usb	= 0x800,
+	.tx		= 0x200,
+	.rx		= 0x400,
+};
+
+static const struct qmp_usb_offsets qmp_usb_offsets_v3 = {
+	.serdes		= 0,
+	.pcs		= 0xc00,
+	.pcs_misc	= 0xa00,
+	.tx		= 0x200,
+	.rx		= 0x400,
+	.tx2		= 0x600,
+	.rx2		= 0x800,
+};
+
 static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
 	.serdes		= 0,
 	.pcs		= 0x0200,
@@ -1586,6 +1710,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.regs			= qmp_v3_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
+	.lanes			= 1,
+
+	.offsets		= &qmp_usb_offsets_ipq9574,
+
+	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
+	.tx_tbl			= ipq9574_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_tx_tbl),
+	.rx_tbl			= ipq9574_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_rx_tbl),
+	.pcs_tbl		= ipq9574_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq9574_usb3_pcs_tbl),
+	.clk_list		= msm8996_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list		= qcm2290_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -1629,6 +1775,28 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
 	.has_phy_dp_com_ctrl	= true,
 };
 
+static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
+	.lanes			= 1,
+
+	.offsets		= &qmp_usb_offsets_v5,
+
+	.serdes_tbl		= sc8280xp_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sc8280xp_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sc8280xp_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sc8280xp_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sc8280xp_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sa8775p_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_tbl),
+	.clk_list		= qmp_v4_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
+	.reset_list		= qcm2290_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v5_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
 	.lanes			= 2,
 
@@ -1922,6 +2090,8 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
 	.lanes			= 2,
 
+	.offsets		= &qmp_usb_offsets_v3,
+
 	.serdes_tbl		= qcm2290_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
 	.tx_tbl			= qcm2290_usb3_tx_tbl,
@@ -2493,10 +2663,16 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp)
 
 	qmp->serdes = base + offs->serdes;
 	qmp->pcs = base + offs->pcs;
+	qmp->pcs_misc = base + offs->pcs_misc;
 	qmp->pcs_usb = base + offs->pcs_usb;
 	qmp->tx = base + offs->tx;
 	qmp->rx = base + offs->rx;
 
+	if (cfg->lanes >= 2) {
+		qmp->tx2 = base + offs->tx2;
+		qmp->rx2 = base + offs->rx2;
+	}
+
 	qmp->pipe_clk = devm_clk_get(dev, "pipe");
 	if (IS_ERR(qmp->pipe_clk)) {
 		return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
@@ -2588,6 +2764,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 	}, {
 		.compatible = "qcom,ipq8074-qmp-usb3-phy",
 		.data = &ipq8074_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,ipq9574-qmp-usb3-phy",
+		.data = &ipq9574_usb3phy_cfg,
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
@@ -2597,6 +2776,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 	}, {
 		.compatible = "qcom,qcm2290-qmp-usb3-phy",
 		.data = &qcm2290_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,sa8775p-qmp-usb3-uni-phy",
+		.data = &sa8775p_usb3_uniphy_cfg,
 	}, {
 		.compatible = "qcom,sc7180-qmp-usb3-phy",
 		.data = &sc7180_usb3phy_cfg,

drivers/phy/qualcomm/phy-qcom-qusb2.c

@@ -911,6 +911,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 	}, {
 		.compatible	= "qcom,ipq8074-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
+	}, {
+		.compatible	= "qcom,ipq9574-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
 	}, {
 		.compatible	= "qcom,msm8953-qusb2-phy",
 		.data		= &msm8996_phy_cfg,

drivers/phy/samsung/Kconfig

@@ -59,7 +59,7 @@ config PHY_EXYNOS4210_USB2
 config PHY_EXYNOS4X12_USB2
 	bool
 	depends on PHY_SAMSUNG_USB2
-	default SOC_EXYNOS3250 || SOC_EXYNOS4412
+	default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 
 config PHY_EXYNOS5250_USB2
 	bool