[SCSI] cxgb4i v5: iscsi driver

Added cxgb4i iSCSI driver.

This patch implements the cxgb4i iscsi connection acceleration for the
open-iscsi initiator.

The cxgb4i driver offers the iscsi PDU based offload:
- digest insertion and verification
- payload direct-placement into host memory buffer.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/Kconfig

@@ -379,6 +379,7 @@ config ISCSI_BOOT_SYSFS
 	  say Y. Otherwise, say N.
 
 source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/cxgbi/Kconfig"
 source "drivers/scsi/bnx2i/Kconfig"
 source "drivers/scsi/be2iscsi/Kconfig"
 

drivers/scsi/Makefile

@@ -134,6 +134,7 @@ obj-$(CONFIG_SCSI_STEX)		+= stex.o
 obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgb3i/
+obj-$(CONFIG_SCSI_CXGB4_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgbi/
 obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
 obj-$(CONFIG_BE2ISCSI)		+= libiscsi.o be2iscsi/
 obj-$(CONFIG_SCSI_PMCRAID)	+= pmcraid.o

drivers/scsi/cxgbi/Kconfig

+source "drivers/scsi/cxgbi/cxgb4i/Kconfig"

drivers/scsi/cxgbi/Makefile

+obj-$(CONFIG_SCSI_CXGB4_ISCSI)	+= libcxgbi.o cxgb4i/

drivers/scsi/cxgbi/cxgb4i/Kbuild

+EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb4
+
+obj-$(CONFIG_SCSI_CXGB4_ISCSI) += cxgb4i.o

drivers/scsi/cxgbi/cxgb4i/Kconfig

+config SCSI_CXGB4_ISCSI
+	tristate "Chelsio T4 iSCSI support"
+	depends on CHELSIO_T4_DEPENDS
+	select CHELSIO_T4
+	select SCSI_ISCSI_ATTRS
+	---help---
+	  This driver supports iSCSI offload for the Chelsio T4 devices.

drivers/scsi/cxgbi/cxgb4i/cxgb4i.h

+/*
+ * cxgb4i.h: Chelsio T4 iSCSI driver.
+ *
+ * Copyright (c) 2010 Chelsio Communications, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Karen Xie (kxie@chelsio.com)
+ * Written by: Rakesh Ranjan (rranjan@chelsio.com)
+ */
+
+#ifndef	__CXGB4I_H__
+#define	__CXGB4I_H__
+
+#define	CXGB4I_SCSI_HOST_QDEPTH	1024
+#define	CXGB4I_MAX_CONN		16384
+#define	CXGB4I_MAX_TARGET	CXGB4I_MAX_CONN
+#define	CXGB4I_MAX_LUN		0x1000
+
+/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
+#define CXGB4I_TX_HEADER_LEN \
+	(sizeof(struct fw_ofld_tx_data_wr) + sizeof(struct sge_opaque_hdr))
+
+struct cpl_rx_data_ddp {
+	union opcode_tid ot;
+	__be16 urg;
+	__be16 len;
+	__be32 seq;
+	union {
+		__be32 nxt_seq;
+		__be32 ddp_report;
+	};
+	__be32 ulp_crc;
+	__be32 ddpvld;
+};
+#endif	/* __CXGB4I_H__ */