Merge branch 'stmmac-EST-interrupts-and-ethtool'

Mohammad Athari Bin Ismail says:

====================
net: stmmac: EST interrupts and ethtool

This patchset adds support for handling EST interrupts and reporting EST
errors. Additionally, the errors are added into ethtool statistic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -182,6 +182,12 @@ struct stmmac_extra_stats {
 	/* TSO */
 	unsigned long tx_tso_frames;
 	unsigned long tx_tso_nfrags;
+	/* EST */
+	unsigned long mtl_est_cgce;
+	unsigned long mtl_est_hlbs;
+	unsigned long mtl_est_hlbf;
+	unsigned long mtl_est_btre;
+	unsigned long mtl_est_btrlm;
 };
 
 /* Safety Feature statistics exposed by ethtool */

drivers/net/ethernet/stmicro/stmmac/dwmac5.c

@@ -595,9 +595,95 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 		ctrl &= ~EEST;
 
 	writel(ctrl, ioaddr + MTL_EST_CONTROL);
+
+	/* Configure EST interrupt */
+	if (cfg->enable)
+		ctrl = (IECGCE | IEHS | IEHF | IEBE | IECC);
+	else
+		ctrl = 0;
+
+	writel(ctrl, ioaddr + MTL_EST_INT_EN);
+
 	return 0;
 }
 
+void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
+			  struct stmmac_extra_stats *x, u32 txqcnt)
+{
+	u32 status, value, feqn, hbfq, hbfs, btrl;
+	u32 txqcnt_mask = (1 << txqcnt) - 1;
+
+	status = readl(ioaddr + MTL_EST_STATUS);
+
+	value = (CGCE | HLBS | HLBF | BTRE | SWLC);
+
+	/* Return if there is no error */
+	if (!(status & value))
+		return;
+
+	if (status & CGCE) {
+		/* Clear Interrupt */
+		writel(CGCE, ioaddr + MTL_EST_STATUS);
+
+		x->mtl_est_cgce++;
+	}
+
+	if (status & HLBS) {
+		value = readl(ioaddr + MTL_EST_SCH_ERR);
+		value &= txqcnt_mask;
+
+		x->mtl_est_hlbs++;
+
+		/* Clear Interrupt */
+		writel(value, ioaddr + MTL_EST_SCH_ERR);
+
+		/* Collecting info to shows all the queues that has HLBS
+		 * issue. The only way to clear this is to clear the
+		 * statistic
+		 */
+		if (net_ratelimit())
+			netdev_err(dev, "EST: HLB(sched) Queue 0x%x\n", value);
+	}
+
+	if (status & HLBF) {
+		value = readl(ioaddr + MTL_EST_FRM_SZ_ERR);
+		feqn = value & txqcnt_mask;
+
+		value = readl(ioaddr + MTL_EST_FRM_SZ_CAP);
+		hbfq = (value & SZ_CAP_HBFQ_MASK(txqcnt)) >> SZ_CAP_HBFQ_SHIFT;
+		hbfs = value & SZ_CAP_HBFS_MASK;
+
+		x->mtl_est_hlbf++;
+
+		/* Clear Interrupt */
+		writel(feqn, ioaddr + MTL_EST_FRM_SZ_ERR);
+
+		if (net_ratelimit())
+			netdev_err(dev, "EST: HLB(size) Queue %u Size %u\n",
+				   hbfq, hbfs);
+	}
+
+	if (status & BTRE) {
+		if ((status & BTRL) == BTRL_MAX)
+			x->mtl_est_btrlm++;
+		else
+			x->mtl_est_btre++;
+
+		btrl = (status & BTRL) >> BTRL_SHIFT;
+
+		if (net_ratelimit())
+			netdev_info(dev, "EST: BTR Error Loop Count %u\n",
+				    btrl);
+
+		writel(BTRE, ioaddr + MTL_EST_STATUS);
+	}
+
+	if (status & SWLC) {
+		writel(SWLC, ioaddr + MTL_EST_STATUS);
+		netdev_info(dev, "EST: SWOL has been switched\n");
+	}
+}
+
 void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
 			  bool enable)
 {

drivers/net/ethernet/stmicro/stmmac/dwmac5.h

@@ -38,6 +38,36 @@
 #define PTOV_SHIFT			24
 #define SSWL				BIT(1)
 #define EEST				BIT(0)
+
+#define MTL_EST_STATUS			0x00000c58
+#define BTRL				GENMASK(11, 8)
+#define BTRL_SHIFT			8
+#define BTRL_MAX			(0xF << BTRL_SHIFT)
+#define SWOL				BIT(7)
+#define SWOL_SHIFT			7
+#define CGCE				BIT(4)
+#define HLBS				BIT(3)
+#define HLBF				BIT(2)
+#define BTRE				BIT(1)
+#define SWLC				BIT(0)
+
+#define MTL_EST_SCH_ERR			0x00000c60
+#define MTL_EST_FRM_SZ_ERR		0x00000c64
+#define MTL_EST_FRM_SZ_CAP		0x00000c68
+#define SZ_CAP_HBFS_MASK		GENMASK(14, 0)
+#define SZ_CAP_HBFQ_SHIFT		16
+#define SZ_CAP_HBFQ_MASK(_val)		({ typeof(_val) (val) = (_val);	\
+					((val) > 4 ? GENMASK(18, 16) :	\
+					 (val) > 2 ? GENMASK(17, 16) :	\
+					 BIT(16)); })
+
+#define MTL_EST_INT_EN			0x00000c70
+#define IECGCE				CGCE
+#define IEHS				HLBS
+#define IEHF				HLBF
+#define IEBE				BTRE
+#define IECC				SWLC
+
 #define MTL_EST_GCL_CONTROL		0x00000c80
 #define BTR_LOW				0x0
 #define BTR_HIGH			0x1
@@ -111,6 +141,8 @@ int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
 			   u32 sub_second_inc, u32 systime_flags);
 int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 			 unsigned int ptp_rate);
+void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
+			   struct stmmac_extra_stats *x, u32 txqcnt);
 void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
 			  bool enable);
 

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -393,6 +393,8 @@ struct stmmac_ops {
 	void (*set_arp_offload)(struct mac_device_info *hw, bool en, u32 addr);
 	int (*est_configure)(void __iomem *ioaddr, struct stmmac_est *cfg,
 			     unsigned int ptp_rate);
+	void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
+			       struct stmmac_extra_stats *x, u32 txqcnt);
 	void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
 			      bool enable);
 };
@@ -491,6 +493,8 @@ struct stmmac_ops {
 	stmmac_do_void_callback(__priv, mac, set_arp_offload, __args)
 #define stmmac_est_configure(__priv, __args...) \
 	stmmac_do_callback(__priv, mac, est_configure, __args)
+#define stmmac_est_irq_status(__priv, __args...) \
+	stmmac_do_void_callback(__priv, mac, est_irq_status, __args)
 #define stmmac_fpe_configure(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, fpe_configure, __args)
 

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c

@@ -158,6 +158,12 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
 	/* TSO */
 	STMMAC_STAT(tx_tso_frames),
 	STMMAC_STAT(tx_tso_nfrags),
+	/* EST */
+	STMMAC_STAT(mtl_est_cgce),
+	STMMAC_STAT(mtl_est_hlbs),
+	STMMAC_STAT(mtl_est_hlbf),
+	STMMAC_STAT(mtl_est_btre),
+	STMMAC_STAT(mtl_est_btrlm),
 };
 #define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
 

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -4314,6 +4314,10 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 	if (stmmac_safety_feat_interrupt(priv))
 		return IRQ_HANDLED;
 
+	if (priv->dma_cap.estsel)
+		stmmac_est_irq_status(priv, priv->ioaddr, priv->dev,
+				      &priv->xstats, tx_cnt);
+
 	/* To handle GMAC own interrupts */
 	if ((priv->plat->has_gmac) || xmac) {
 		int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);