Commit 7bc0c4ba authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Tony Lindgren

ARM: OMAP: mcbsp: Start generalize signal muxing functions

This generalizes the omap2_mcbsp1_mux_clkr_src and omap2_mcbsp1_mux_fsr_src
implementation between generic McBSP and OMAP2 specific McBSP code. These
functions are used to select source for CLKR and FSR signals on OMAP2+.

Start generalizing the code by implementing an optional mux_signal function
pointer in platform data that will implement the actual muxing and which is
called now from omap2_mcbsp1_mux_clkr_src and omap2_mcbsp1_mux_fsr_src.
These functions are to be removed later and cleanup the API so that
mux_signal gets its arguments directly from client code.
Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: default avatarJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 09d28d2c
......@@ -34,33 +34,36 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/* McBSP internal signal muxing functions */
void omap2_mcbsp1_mux_clkr_src(u8 mux)
/* McBSP internal signal muxing function */
static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
if (mux == CLKR_SRC_CLKR)
v &= ~OMAP2_MCBSP1_CLKR_MASK;
else if (mux == CLKR_SRC_CLKX)
v |= OMAP2_MCBSP1_CLKR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
u32 v;
if (!strcmp(signal, "clkr")) {
if (!strcmp(src, "clkr"))
v &= ~OMAP2_MCBSP1_CLKR_MASK;
else if (!strcmp(src, "clkx"))
v |= OMAP2_MCBSP1_CLKR_MASK;
else
return -EINVAL;
} else if (!strcmp(signal, "fsr")) {
if (!strcmp(src, "fsr"))
v &= ~OMAP2_MCBSP1_FSR_MASK;
else if (!strcmp(src, "fsx"))
v |= OMAP2_MCBSP1_FSR_MASK;
else
return -EINVAL;
} else {
return -EINVAL;
}
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
if (mux == FSR_SRC_FSR)
v &= ~OMAP2_MCBSP1_FSR_MASK;
else if (mux == FSR_SRC_FSX)
v |= OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
return 0;
}
EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
/* McBSP CLKS source switching function */
static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
......@@ -181,6 +184,8 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
return PTR_ERR(pdev);
}
pdata->set_clk_src = omap2_mcbsp_set_clk_src;
if (id == 1)
pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
......
......@@ -309,6 +309,7 @@ struct omap_mcbsp_platform_data {
bool has_ccr; /* Transceiver has configuration control registers */
int (*enable_st_clock)(unsigned int, bool);
int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
struct omap_mcbsp_st_data {
......
......@@ -922,21 +922,41 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
}
EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
#ifndef CONFIG_ARCH_OMAP2PLUS
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
__func__);
return;
struct omap_mcbsp *mcbsp;
const char *src;
if (mux == CLKR_SRC_CLKR)
src = "clkr";
else if (mux == CLKR_SRC_CLKX)
src = "clkx";
else
return;
mcbsp = id_to_mcbsp_ptr(0);
if (mcbsp->pdata->mux_signal)
mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
}
EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
__func__);
return;
struct omap_mcbsp *mcbsp;
const char *src;
if (mux == FSR_SRC_FSR)
src = "fsr";
else if (mux == FSR_SRC_FSX)
src = "fsx";
else
return;
mcbsp = id_to_mcbsp_ptr(0);
if (mcbsp->pdata->mux_signal)
mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
}
#endif
EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment