Commit 7bde846d authored by Eugeniy Paltsev's avatar Eugeniy Paltsev Committed by Vineet Gupta

ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code

Get rid of core pll frequency set in platform code as we set it via
device tree using 'assigned-clock-rates' property.
Acked-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent a08c832f
......@@ -38,42 +38,6 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
#define CREG_PAE (CREG_BASE + 0x180)
#define CREG_PAE_UPDATE (CREG_BASE + 0x194)
#define CREG_CORE_IF_CLK_DIV (CREG_BASE + 0x4B8)
#define CREG_CORE_IF_CLK_DIV_2 0x1
#define CGU_BASE ARC_PERIPHERAL_BASE
#define CGU_PLL_STATUS (ARC_PERIPHERAL_BASE + 0x4)
#define CGU_PLL_CTRL (ARC_PERIPHERAL_BASE + 0x0)
#define CGU_PLL_STATUS_LOCK BIT(0)
#define CGU_PLL_STATUS_ERR BIT(1)
#define CGU_PLL_CTRL_1GHZ 0x3A10
#define HSDK_PLL_LOCK_TIMEOUT 500
#define HSDK_PLL_LOCKED() \
!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
#define HSDK_PLL_ERR() \
!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
static void __init hsdk_set_cpu_freq_1ghz(void)
{
u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
/*
* As we set cpu clock which exceeds 500MHz, the divider for the interface
* clock must be programmed to div-by-2.
*/
iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
/* Set cpu clock to 1GHz */
iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
while (!HSDK_PLL_LOCKED() && timeout--)
cpu_relax();
if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
pr_err("Failed to setup CPU frequency to 1GHz!");
}
#define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xA000)
#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108)
#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30)
......@@ -98,12 +62,6 @@ static void __init hsdk_init_early(void)
* minimum possible div-by-2.
*/
iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
/*
* Setup CPU frequency to 1GHz.
* TODO: remove it after smart hsdk pll driver will be introduced.
*/
hsdk_set_cpu_freq_1ghz();
}
static const char *hsdk_compat[] __initconst = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment