PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
The PCI Tegra controller conversion to a device tree configurable driver in commit d1523b52 ("PCI: tegra: Move PCIe driver to drivers/pci/host") implied that code for the driver can be compiled in for a kernel supporting multiple platforms. Unfortunately, a blind move of the code did not check that some of the quirks that were applied in arch/arm (eg enabling Relaxed Ordering on all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID for both Vendor-ID and Device-ID) are now applied in all kernels that compile the PCI Tegra controlled driver, DT and ACPI alike. This is completely wrong, in that enablement of Relaxed Ordering is only required by default in Tegra20 platforms as described in the Tegra20 Technical Reference Manual (available at https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in Section 34.1, where it is mentioned that Relaxed Ordering bit needs to be enabled in its root ports to avoid deadlock in hardware) and in the Tegra30 platforms for the same reasons (unfortunately not documented in the TRM). There is no other strict requirement on PCI devices Relaxed Ordering enablement on any other Tegra platforms or PCI host bridge driver. Fix this quite upsetting situation by limiting the vendor and device IDs to which the Relaxed Ordering quirk applies to the root ports in question, reported above. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> [lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
Showing
Please register or sign in to comment