Commit 7bfbae10 authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k: disable RIFS search for AR91xx based chips

While ath9k does not support RIFS yet, the ability to receive RIFS
frames is currently enabled for most chipsets in the initvals.
This is causing baseband related issues on AR9160 and AR9130 based
chipsets, which can lock up under certain conditions.

This patch fixes these issues by overriding the initvals, effectively
disabling RIFS for all affected chipsets.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Acked-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent a040d532
...@@ -1310,6 +1310,16 @@ static void ath9k_hw_override_ini(struct ath_hw *ah, ...@@ -1310,6 +1310,16 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
* Necessary to avoid issues on AR5416 2.0 * Necessary to avoid issues on AR5416 2.0
*/ */
REG_WRITE(ah, 0x9800 + (651 << 2), 0x11); REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
/*
* Disable RIFS search on some chips to avoid baseband
* hang issues.
*/
if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
val = REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS);
val &= ~AR_PHY_RIFS_INIT_DELAY;
REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val);
}
} }
static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah, static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah,
......
...@@ -384,6 +384,9 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah, ...@@ -384,6 +384,9 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
#define AR_PHY_HEAVY_CLIP_ENABLE 0x99E0 #define AR_PHY_HEAVY_CLIP_ENABLE 0x99E0
#define AR_PHY_HEAVY_CLIP_FACTOR_RIFS 0x99EC
#define AR_PHY_RIFS_INIT_DELAY 0x03ff0000
#define AR_PHY_M_SLEEP 0x99f0 #define AR_PHY_M_SLEEP 0x99f0
#define AR_PHY_REFCLKDLY 0x99f4 #define AR_PHY_REFCLKDLY 0x99f4
#define AR_PHY_REFCLKPD 0x99f8 #define AR_PHY_REFCLKPD 0x99f8
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment