Commit 7bfbc6e3 authored by Andrzej Pietrasiewicz's avatar Andrzej Pietrasiewicz Committed by Felipe Balbi

Documentation: usb: ECM subset function testing

Summary of how to test ECM subset function of USB gadget.
Signed-off-by: default avatarAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent d5862ca6
......@@ -3,6 +3,7 @@ provided by gadgets.
1. ACM function
2. ECM function
3. ECM subset function
1. ACM function
......@@ -66,3 +67,36 @@ Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
3. ECM subset function
======================
The function is provided by usb_f_ecm_subset.ko module.
Function-specific configfs interface
------------------------------------
The function name to use when creating the function directory is "geth".
The ECM subset function provides these attributes in its function directory:
ifname - network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
Ethernet over USB link
and after creating the functions/ecm.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
Except for ifname they can be written to until the function is linked to a
configuration. The ifname is read-only and contains the name of the interface
which was assigned by the net core, e. g. usb0.
Testing the ECM subset function
-------------------------------
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment