Commit 7c1552d1 authored by Ben Dooks's avatar Ben Dooks

ARM: Merge for-2637/s3c24xx/h1940

parents 8f08bfd4 68730b45
...@@ -30,7 +30,7 @@ static void h1940bt_enable(int on) ...@@ -30,7 +30,7 @@ static void h1940bt_enable(int on)
{ {
if (on) { if (on) {
/* Power on the chip */ /* Power on the chip */
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
/* Reset the chip */ /* Reset the chip */
mdelay(10); mdelay(10);
...@@ -43,7 +43,7 @@ static void h1940bt_enable(int on) ...@@ -43,7 +43,7 @@ static void h1940bt_enable(int on)
mdelay(10); mdelay(10);
gpio_set_value(S3C2410_GPH(1), 0); gpio_set_value(S3C2410_GPH(1), 0);
mdelay(10); mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
} }
} }
...@@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) ...@@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
if (ret) { if (ret) {
dev_err(&pdev->dev, "could not get GPH1\n");\ dev_err(&pdev->dev, "could not get GPH1\n");
return ret;
}
ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
if (ret) {
gpio_free(S3C2410_GPH(1));
dev_err(&pdev->dev, "could not get BT_POWER\n");
return ret; return ret;
} }
......
...@@ -14,51 +14,30 @@ ...@@ -14,51 +14,30 @@
#ifndef __ASM_ARCH_H1940_LATCH_H #ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H
#include <mach/gpio.h>
#ifndef __ASSEMBLY__ #define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#else
#define H1940_LATCH 0xF8000000
#endif
#define H1940_PA_LATCH (S3C2410_CS2)
/* SD layer latch */ /* SD layer latch */
#define H1940_LATCH_SDQ1 (1<<16) #define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0)
#define H1940_LATCH_LCD_P1 (1<<17) #define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1)
#define H1940_LATCH_LCD_P2 (1<<18) #define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2)
#define H1940_LATCH_LCD_P3 (1<<19) #define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3)
#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ #define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4)
#define H1940_LATCH_LED_RED (1<<21) #define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5)
#define H1940_LATCH_SDQ7 (1<<22) #define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6)
#define H1940_LATCH_USB_DP (1<<23) #define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7)
/* CPU layer latch */ /* CPU layer latch */
#define H1940_LATCH_UDA_POWER (1<<24) #define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8)
#define H1940_LATCH_AUDIO_POWER (1<<25) #define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9)
#define H1940_LATCH_SM803_ENABLE (1<<26) #define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10)
#define H1940_LATCH_LCD_P4 (1<<27) #define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11)
#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ #define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12)
#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ #define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13)
#define H1940_LATCH_LED_GREEN (1<<30) #define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14)
#define H1940_LATCH_LED_FLASH (1<<31) #define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15)
/* default settings */
#define H1940_LATCH_DEFAULT \
H1940_LATCH_LCD_P4 | \
H1940_LATCH_SM803_ENABLE | \
H1940_LATCH_SDQ1 | \
H1940_LATCH_LCD_P1 | \
H1940_LATCH_LCD_P2 | \
H1940_LATCH_LCD_P3 | \
H1940_LATCH_MAX1698_nSHUTDOWN | \
H1940_LATCH_CPUQ5
/* control functions */
extern void h1940_latch_control(unsigned int clear, unsigned int set);
#endif /* __ASM_ARCH_H1940_LATCH_H */ #endif /* __ASM_ARCH_H1940_LATCH_H */
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/pwm_backlight.h> #include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <video/platform_lcd.h> #include <video/platform_lcd.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
...@@ -59,6 +60,14 @@ ...@@ -59,6 +60,14 @@
#include <plat/mci.h> #include <plat/mci.h>
#include <plat/ts.h> #include <plat/ts.h>
#include <sound/uda1380.h>
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#define H1940_PA_LATCH S3C2410_CS2
#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
static struct map_desc h1940_iodesc[] __initdata = { static struct map_desc h1940_iodesc[] __initdata = {
[0] = { [0] = {
.virtual = (unsigned long)H1940_LATCH, .virtual = (unsigned long)H1940_LATCH,
...@@ -100,9 +109,9 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = { ...@@ -100,9 +109,9 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
/* Board control latch control */ /* Board control latch control */
static unsigned int latch_state = H1940_LATCH_DEFAULT; static unsigned int latch_state;
void h1940_latch_control(unsigned int clear, unsigned int set) static void h1940_latch_control(unsigned int clear, unsigned int set)
{ {
unsigned long flags; unsigned long flags;
...@@ -116,7 +125,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set) ...@@ -116,7 +125,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
local_irq_restore(flags); local_irq_restore(flags);
} }
EXPORT_SYMBOL_GPL(h1940_latch_control); static inline int h1940_gpiolib_to_latch(int offset)
{
return 1 << (offset + 16);
}
static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
unsigned offset, int value)
{
int latch_bit = h1940_gpiolib_to_latch(offset);
h1940_latch_control(value ? 0 : latch_bit,
value ? latch_bit : 0);
}
static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
unsigned offset, int value)
{
h1940_gpiolib_latch_set(chip, offset, value);
return 0;
}
static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
unsigned offset)
{
return (latch_state >> (offset + 16)) & 1;
}
struct gpio_chip h1940_latch_gpiochip = {
.base = H1940_LATCH_GPIO(0),
.owner = THIS_MODULE,
.label = "H1940_LATCH",
.ngpio = 16,
.direction_output = h1940_gpiolib_latch_output,
.set = h1940_gpiolib_latch_set,
.get = h1940_gpiolib_latch_get,
};
static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{ {
...@@ -125,10 +169,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) ...@@ -125,10 +169,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd) switch (cmd)
{ {
case S3C2410_UDC_P_ENABLE : case S3C2410_UDC_P_ENABLE :
h1940_latch_control(0, H1940_LATCH_USB_DP); gpio_set_value(H1940_LATCH_USB_DP, 1);
break; break;
case S3C2410_UDC_P_DISABLE : case S3C2410_UDC_P_DISABLE :
h1940_latch_control(H1940_LATCH_USB_DP, 0); gpio_set_value(H1940_LATCH_USB_DP, 0);
break; break;
case S3C2410_UDC_P_RESET : case S3C2410_UDC_P_RESET :
break; break;
...@@ -199,10 +243,25 @@ static struct platform_device h1940_device_bluetooth = { ...@@ -199,10 +243,25 @@ static struct platform_device h1940_device_bluetooth = {
.id = -1, .id = -1,
}; };
static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
switch (power_mode) {
case MMC_POWER_OFF:
gpio_set_value(H1940_LATCH_SD_POWER, 0);
break;
case MMC_POWER_UP:
case MMC_POWER_ON:
gpio_set_value(H1940_LATCH_SD_POWER, 1);
break;
default:
break;
};
}
static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPF(5), .gpio_detect = S3C2410_GPF(5),
.gpio_wprotect = S3C2410_GPH(8), .gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL, .set_power = h1940_set_mmc_power,
.ocr_avail = MMC_VDD_32_33, .ocr_avail = MMC_VDD_32_33,
}; };
...@@ -213,15 +272,32 @@ static int h1940_backlight_init(struct device *dev) ...@@ -213,15 +272,32 @@ static int h1940_backlight_init(struct device *dev)
gpio_direction_output(S3C2410_GPB(0), 0); gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
return 0; return 0;
} }
static int h1940_backlight_notify(struct device *dev, int brightness)
{
if (!brightness) {
gpio_direction_output(S3C2410_GPB(0), 1);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
} else {
gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
}
return brightness;
}
static void h1940_backlight_exit(struct device *dev) static void h1940_backlight_exit(struct device *dev)
{ {
gpio_direction_output(S3C2410_GPB(0), 1); gpio_direction_output(S3C2410_GPB(0), 1);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
} }
static struct platform_pwm_backlight_data backlight_data = { static struct platform_pwm_backlight_data backlight_data = {
.pwm_id = 0, .pwm_id = 0,
.max_brightness = 100, .max_brightness = 100,
...@@ -229,6 +305,7 @@ static struct platform_pwm_backlight_data backlight_data = { ...@@ -229,6 +305,7 @@ static struct platform_pwm_backlight_data backlight_data = {
/* tcnt = 0x31 */ /* tcnt = 0x31 */
.pwm_period_ns = 36296, .pwm_period_ns = 36296,
.init = h1940_backlight_init, .init = h1940_backlight_init,
.notify = h1940_backlight_notify,
.exit = h1940_backlight_exit, .exit = h1940_backlight_exit,
}; };
...@@ -247,19 +324,37 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, ...@@ -247,19 +324,37 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd,
int value; int value;
if (!power) { if (!power) {
/* set to 3ec */ gpio_set_value(S3C2410_GPC(0), 0);
gpio_direction_output(S3C2410_GPC(0), 0);
/* wait for 3ac */ /* wait for 3ac */
do { do {
value = gpio_get_value(S3C2410_GPC(6)); value = gpio_get_value(S3C2410_GPC(6));
} while (value); } while (value);
/* set to 38c */
gpio_direction_output(S3C2410_GPC(5), 0); gpio_set_value(H1940_LATCH_LCD_P2, 0);
gpio_set_value(H1940_LATCH_LCD_P3, 0);
gpio_set_value(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_set_value(H1940_LATCH_LCD_P1, 0);
gpio_set_value(H1940_LATCH_LCD_P0, 0);
gpio_set_value(S3C2410_GPC(5), 0);
} else { } else {
/* Set to 3ac */ gpio_set_value(H1940_LATCH_LCD_P0, 1);
gpio_direction_output(S3C2410_GPC(5), 1); gpio_set_value(H1940_LATCH_LCD_P1, 1);
/* Set to 3ad */
gpio_direction_output(S3C2410_GPC(0), 1); s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
gpio_set_value(S3C2410_GPC(5), 1);
gpio_set_value(S3C2410_GPC(0), 1);
gpio_set_value(H1940_LATCH_LCD_P3, 1);
gpio_set_value(H1940_LATCH_LCD_P2, 1);
gpio_set_value(H1940_LATCH_LCD_P4, 1);
} }
} }
...@@ -273,12 +368,26 @@ static struct platform_device h1940_lcd_powerdev = { ...@@ -273,12 +368,26 @@ static struct platform_device h1940_lcd_powerdev = {
.dev.platform_data = &h1940_lcd_power_data, .dev.platform_data = &h1940_lcd_power_data,
}; };
static struct uda1380_platform_data uda1380_info = {
.gpio_power = H1940_LATCH_UDA_POWER,
.gpio_reset = S3C2410_GPA(12),
.dac_clk = UDA1380_DAC_CLK_SYSCLK,
};
static struct i2c_board_info h1940_i2c_devices[] = {
{
I2C_BOARD_INFO("uda1380", 0x1a),
.platform_data = &uda1380_info,
},
};
static struct platform_device *h1940_devices[] __initdata = { static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_ohci, &s3c_device_ohci,
&s3c_device_lcd, &s3c_device_lcd,
&s3c_device_wdt, &s3c_device_wdt,
&s3c_device_i2c0, &s3c_device_i2c0,
&s3c_device_iis, &s3c_device_iis,
&s3c_device_pcm,
&s3c_device_usbgadget, &s3c_device_usbgadget,
&h1940_device_leds, &h1940_device_leds,
&h1940_device_bluetooth, &h1940_device_bluetooth,
...@@ -303,6 +412,10 @@ static void __init h1940_map_io(void) ...@@ -303,6 +412,10 @@ static void __init h1940_map_io(void)
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif #endif
s3c_pm_init(); s3c_pm_init();
/* Add latch gpio chip, set latch initial value */
h1940_latch_control(0, 0);
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
} }
/* H1940 and RX3715 need to reserve this for suspend */ /* H1940 and RX3715 need to reserve this for suspend */
...@@ -340,12 +453,38 @@ static void __init h1940_init(void) ...@@ -340,12 +453,38 @@ static void __init h1940_init(void)
writel(tmp, S3C2410_UPLLCON); writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power"); gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(1), "LCD power");
gpio_request(S3C2410_GPC(4), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power");
gpio_request(H1940_LATCH_LCD_P0, "LCD power");
gpio_request(H1940_LATCH_LCD_P1, "LCD power");
gpio_request(H1940_LATCH_LCD_P2, "LCD power");
gpio_request(H1940_LATCH_LCD_P3, "LCD power");
gpio_request(H1940_LATCH_LCD_P4, "LCD power");
gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
gpio_direction_output(S3C2410_GPC(0), 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_direction_output(S3C2410_GPC(5), 0);
gpio_direction_input(S3C2410_GPC(6)); gpio_direction_input(S3C2410_GPC(6));
gpio_direction_output(H1940_LATCH_LCD_P0, 0);
gpio_direction_output(H1940_LATCH_LCD_P1, 0);
gpio_direction_output(H1940_LATCH_LCD_P2, 0);
gpio_direction_output(H1940_LATCH_LCD_P3, 0);
gpio_direction_output(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
gpio_request(H1940_LATCH_USB_DP, "USB pullup");
gpio_direction_output(H1940_LATCH_USB_DP, 0);
gpio_request(H1940_LATCH_SD_POWER, "SD power");
gpio_direction_output(H1940_LATCH_SD_POWER, 0);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
i2c_register_board_info(0, h1940_i2c_devices,
ARRAY_SIZE(h1940_i2c_devices));
} }
MACHINE_START(H1940, "IPAQ-H1940") MACHINE_START(H1940, "IPAQ-H1940")
......
...@@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA ...@@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA
int int
default 128 if S3C24XX_GPIO_EXTRA128 default 128 if S3C24XX_GPIO_EXTRA128
default 64 if S3C24XX_GPIO_EXTRA64 default 64 if S3C24XX_GPIO_EXTRA64
default 16 if ARCH_H1940
default 0 default 0
config S3C24XX_GPIO_EXTRA64 config S3C24XX_GPIO_EXTRA64
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment