Commit 7c3ca061 authored by Sylwester Nawrocki's avatar Sylwester Nawrocki

clk: samsung: clk-exynos-audss: controller variant handling rework

Then variant handling is reworked to make the code simpler when
more variants are added.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
parent 1d9aa64c
......@@ -14,18 +14,13 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/syscore_ops.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
enum exynos_audss_clk_type {
TYPE_EXYNOS4210,
TYPE_EXYNOS5250,
TYPE_EXYNOS5420,
};
static DEFINE_SPINLOCK(lock);
static struct clk **clk_table;
static void __iomem *reg_base;
......@@ -73,14 +68,34 @@ static struct syscore_ops exynos_audss_clk_syscore_ops = {
};
#endif /* CONFIG_PM_SLEEP */
struct exynos_audss_clk_drvdata {
unsigned int has_adma_clk:1;
unsigned int enable_epll:1;
unsigned int num_clks;
};
static const struct exynos_audss_clk_drvdata exynos4210_drvdata = {
.num_clks = EXYNOS_AUDSS_MAX_CLKS - 1,
};
static const struct exynos_audss_clk_drvdata exynos5420_drvdata = {
.num_clks = EXYNOS_AUDSS_MAX_CLKS,
.has_adma_clk = 1,
.enable_epll = 1,
};
static const struct of_device_id exynos_audss_clk_of_match[] = {
{ .compatible = "samsung,exynos4210-audss-clock",
.data = (void *)TYPE_EXYNOS4210, },
{ .compatible = "samsung,exynos5250-audss-clock",
.data = (void *)TYPE_EXYNOS5250, },
{ .compatible = "samsung,exynos5420-audss-clock",
.data = (void *)TYPE_EXYNOS5420, },
{},
{
.compatible = "samsung,exynos4210-audss-clock",
.data = &exynos4210_drvdata,
}, {
.compatible = "samsung,exynos5250-audss-clock",
.data = &exynos4210_drvdata,
}, {
.compatible = "samsung,exynos5420-audss-clock",
.data = &exynos5420_drvdata,
},
{ },
};
static void exynos_audss_clk_teardown(void)
......@@ -106,19 +121,17 @@ static void exynos_audss_clk_teardown(void)
/* register exynos_audss clocks */
static int exynos_audss_clk_probe(struct platform_device *pdev)
{
int i, ret = 0;
struct resource *res;
const char *mout_audss_p[] = {"fin_pll", "fout_epll"};
const char *mout_i2s_p[] = {"mout_audss", "cdclk0", "sclk_audio0"};
const char *sclk_pcm_p = "sclk_pcm0";
struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
const struct of_device_id *match;
enum exynos_audss_clk_type variant;
const struct exynos_audss_clk_drvdata *variant;
struct resource *res;
int i, ret = 0;
match = of_match_node(exynos_audss_clk_of_match, pdev->dev.of_node);
if (!match)
variant = of_device_get_match_data(&pdev->dev);
if (!variant)
return -EINVAL;
variant = (enum exynos_audss_clk_type)match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg_base = devm_ioremap_resource(&pdev->dev, res);
......@@ -126,7 +139,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to map audss registers\n");
return PTR_ERR(reg_base);
}
/* EPLL don't have to be enabled for boards other than Exynos5420 */
epll = ERR_PTR(-ENODEV);
clk_table = devm_kzalloc(&pdev->dev,
......@@ -136,10 +149,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
return -ENOMEM;
clk_data.clks = clk_table;
if (variant == TYPE_EXYNOS5420)
clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
else
clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS - 1;
clk_data.clk_num = variant->num_clks;
pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
pll_in = devm_clk_get(&pdev->dev, "pll_in");
......@@ -148,7 +158,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
if (!IS_ERR(pll_in)) {
mout_audss_p[1] = __clk_get_name(pll_in);
if (variant == TYPE_EXYNOS5420) {
if (variant->enable_epll) {
epll = pll_in;
ret = clk_prepare_enable(epll);
......@@ -210,7 +220,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
sclk_pcm_p, CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 5, 0, &lock);
if (variant == TYPE_EXYNOS5420) {
if (variant->has_adma_clk) {
clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",
"dout_srp", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 9, 0, &lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment