Merge tag 'phy-fixes-5.10' of...

Merge tag 'phy-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-linus

Vinod writes:

phy: fixes for 5.10

Bunch of fixes for phy drivers:
*) USB phy incorrect clearing of bits
*) Tegra xusb dangling pointer
*) qcom-qmp null ptr initialization
*) cpcap-usb irq flags
*) intel kkembay kconfig depends
*) qualcomm OF dependency
*) mediatek typo

* tag 'phy-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: mediatek: fix spelling mistake in Kconfig "veriosn" -> "version"
  phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency
  phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency
  phy: intel: PHY_INTEL_KEEMBAY_EMMC should depend on ARCH_KEEMBAY
  phy: cpcap-usb: Use IRQF_ONESHOT
  phy: qcom-qmp: Initialize another pointer to NULL
  phy: tegra: xusb: Fix dangling pointer on probe failure
  phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211

drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c

@@ -270,11 +270,6 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 	reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
 	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 
-	/* Fix the incorrect default */
-	reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP);
-	reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK;
-	brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP);
-
 	usb_init_common(params);
 
 	/*

drivers/phy/intel/Kconfig

@@ -4,7 +4,7 @@
 #
 config PHY_INTEL_KEEMBAY_EMMC
 	tristate "Intel Keem Bay EMMC PHY driver"
-	depends on (OF && ARM64) || COMPILE_TEST
+	depends on ARCH_KEEMBAY || COMPILE_TEST
 	depends on HAS_IOMEM
 	select GENERIC_PHY
 	select REGMAP_MMIO

drivers/phy/mediatek/Kconfig

@@ -12,7 +12,7 @@ config PHY_MTK_TPHY
 	  it supports multiple usb2.0, usb3.0 ports, PCIe and
 	  SATA, and meanwhile supports two version T-PHY which have
 	  different banks layout, the T-PHY with shared banks between
-	  multi-ports is first version, otherwise is second veriosn,
+	  multi-ports is first version, otherwise is second version,
 	  so you can easily distinguish them by banks layout.
 
 config PHY_MTK_UFS

drivers/phy/motorola/phy-cpcap-usb.c

@@ -364,7 +364,8 @@ static int cpcap_usb_init_irq(struct platform_device *pdev,
 
 	error = devm_request_threaded_irq(ddata->dev, irq, NULL,
 					  cpcap_phy_irq_thread,
-					  IRQF_SHARED,
+					  IRQF_SHARED |
+					  IRQF_ONESHOT,
 					  name, ddata);
 	if (error) {
 		dev_err(ddata->dev, "could not get irq %s: %i\n",

drivers/phy/qualcomm/Kconfig

@@ -87,7 +87,7 @@ config PHY_QCOM_USB_HSIC
 
 config PHY_QCOM_USB_HS_28NM
 	tristate "Qualcomm 28nm High-Speed PHY"
-	depends on ARCH_QCOM || COMPILE_TEST
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
 	select GENERIC_PHY
 	help
@@ -98,7 +98,7 @@ config PHY_QCOM_USB_HS_28NM
 
 config PHY_QCOM_USB_SS
 	tristate "Qualcomm USB Super-Speed PHY driver"
-	depends on ARCH_QCOM || COMPILE_TEST
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
 	select GENERIC_PHY
 	help

drivers/phy/qualcomm/phy-qcom-qmp.c

@@ -3926,7 +3926,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	void __iomem *serdes;
 	void __iomem *usb_serdes;
-	void __iomem *dp_serdes;
+	void __iomem *dp_serdes = NULL;
 	const struct qmp_phy_combo_cfg *combo_cfg = NULL;
 	const struct qmp_phy_cfg *cfg = NULL;
 	const struct qmp_phy_cfg *usb_cfg = NULL;

drivers/phy/tegra/xusb.c

@@ -1242,6 +1242,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 reset:
 	reset_control_assert(padctl->rst);
 remove:
+	platform_set_drvdata(pdev, NULL);
 	soc->ops->remove(padctl);
 	return err;
 }