Commit 7d29f349 authored by Bodong Wang's avatar Bodong Wang Committed by Doug Ledford

IB/mlx5: Properly adjust rate limit on QP state transitions

- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
  RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: default avatarBodong Wang <bodong@mellanox.com>
Reviewed-by: default avatarMatan Barak <matanb@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent 189aba99
......@@ -3105,7 +3105,8 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
dev->ib_dev.uverbs_ex_cmd_mask =
(1ull << IB_USER_VERBS_EX_CMD_QUERY_DEVICE) |
(1ull << IB_USER_VERBS_EX_CMD_CREATE_CQ) |
(1ull << IB_USER_VERBS_EX_CMD_CREATE_QP);
(1ull << IB_USER_VERBS_EX_CMD_CREATE_QP) |
(1ull << IB_USER_VERBS_EX_CMD_MODIFY_QP);
dev->ib_dev.query_device = mlx5_ib_query_device;
dev->ib_dev.query_port = mlx5_ib_query_port;
......
......@@ -389,6 +389,7 @@ struct mlx5_ib_qp {
struct list_head qps_list;
struct list_head cq_recv_list;
struct list_head cq_send_list;
u32 rate_limit;
};
struct mlx5_ib_cq_buf {
......
......@@ -78,12 +78,14 @@ struct mlx5_wqe_eth_pad {
enum raw_qp_set_mask_map {
MLX5_RAW_QP_MOD_SET_RQ_Q_CTR_ID = 1UL << 0,
MLX5_RAW_QP_RATE_LIMIT = 1UL << 1,
};
struct mlx5_modify_raw_qp_param {
u16 operation;
u32 set_mask; /* raw_qp_set_mask_map */
u32 rate_limit;
u8 rq_q_ctr_id;
};
......@@ -2470,8 +2472,14 @@ static int modify_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
}
static int modify_raw_packet_qp_sq(struct mlx5_core_dev *dev,
struct mlx5_ib_sq *sq, int new_state)
struct mlx5_ib_sq *sq,
int new_state,
const struct mlx5_modify_raw_qp_param *raw_qp_param)
{
struct mlx5_ib_qp *ibqp = sq->base.container_mibqp;
u32 old_rate = ibqp->rate_limit;
u32 new_rate = old_rate;
u16 rl_index = 0;
void *in;
void *sqc;
int inlen;
......@@ -2487,10 +2495,44 @@ static int modify_raw_packet_qp_sq(struct mlx5_core_dev *dev,
sqc = MLX5_ADDR_OF(modify_sq_in, in, ctx);
MLX5_SET(sqc, sqc, state, new_state);
if (raw_qp_param->set_mask & MLX5_RAW_QP_RATE_LIMIT) {
if (new_state != MLX5_SQC_STATE_RDY)
pr_warn("%s: Rate limit can only be changed when SQ is moving to RDY\n",
__func__);
else
new_rate = raw_qp_param->rate_limit;
}
if (old_rate != new_rate) {
if (new_rate) {
err = mlx5_rl_add_rate(dev, new_rate, &rl_index);
if (err) {
pr_err("Failed configuring rate %u: %d\n",
new_rate, err);
goto out;
}
}
MLX5_SET64(modify_sq_in, in, modify_bitmask, 1);
MLX5_SET(sqc, sqc, packet_pacing_rate_limit_index, rl_index);
}
err = mlx5_core_modify_sq(dev, sq->base.mqp.qpn, in, inlen);
if (err)
if (err) {
/* Remove new rate from table if failed */
if (new_rate &&
old_rate != new_rate)
mlx5_rl_remove_rate(dev, new_rate);
goto out;
}
/* Only remove the old rate after new rate was set */
if ((old_rate &&
(old_rate != new_rate)) ||
(new_state != MLX5_SQC_STATE_RDY))
mlx5_rl_remove_rate(dev, old_rate);
ibqp->rate_limit = new_rate;
sq->state = new_state;
out:
......@@ -2505,6 +2547,8 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
struct mlx5_ib_raw_packet_qp *raw_packet_qp = &qp->raw_packet_qp;
struct mlx5_ib_rq *rq = &raw_packet_qp->rq;
struct mlx5_ib_sq *sq = &raw_packet_qp->sq;
int modify_rq = !!qp->rq.wqe_cnt;
int modify_sq = !!qp->sq.wqe_cnt;
int rq_state;
int sq_state;
int err;
......@@ -2522,10 +2566,18 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
rq_state = MLX5_RQC_STATE_RST;
sq_state = MLX5_SQC_STATE_RST;
break;
case MLX5_CMD_OP_INIT2INIT_QP:
case MLX5_CMD_OP_INIT2RTR_QP:
case MLX5_CMD_OP_RTR2RTS_QP:
case MLX5_CMD_OP_RTS2RTS_QP:
if (raw_qp_param->set_mask ==
MLX5_RAW_QP_RATE_LIMIT) {
modify_rq = 0;
sq_state = sq->state;
} else {
return raw_qp_param->set_mask ? -EINVAL : 0;
}
break;
case MLX5_CMD_OP_INIT2INIT_QP:
case MLX5_CMD_OP_INIT2RTR_QP:
if (raw_qp_param->set_mask)
return -EINVAL;
else
......@@ -2535,13 +2587,13 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
return -EINVAL;
}
if (qp->rq.wqe_cnt) {
err = modify_raw_packet_qp_rq(dev, rq, rq_state, raw_qp_param);
if (modify_rq) {
err = modify_raw_packet_qp_rq(dev, rq, rq_state, raw_qp_param);
if (err)
return err;
}
if (qp->sq.wqe_cnt) {
if (modify_sq) {
if (tx_affinity) {
err = modify_raw_packet_tx_affinity(dev->mdev, sq,
tx_affinity);
......@@ -2549,7 +2601,7 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
return err;
}
return modify_raw_packet_qp_sq(dev->mdev, sq, sq_state);
return modify_raw_packet_qp_sq(dev->mdev, sq, sq_state, raw_qp_param);
}
return 0;
......@@ -2804,6 +2856,12 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
raw_qp_param.rq_q_ctr_id = mibport->q_cnt_id;
raw_qp_param.set_mask |= MLX5_RAW_QP_MOD_SET_RQ_Q_CTR_ID;
}
if (attr_mask & IB_QP_RATE_LIMIT) {
raw_qp_param.rate_limit = attr->rate_limit;
raw_qp_param.set_mask |= MLX5_RAW_QP_RATE_LIMIT;
}
err = modify_raw_packet_qp(dev, qp, &raw_qp_param, tx_affinity);
} else {
err = mlx5_core_qp_modify(dev->mdev, op, optpar, context,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment