Commit 7d485f64 authored by Ard Biesheuvel's avatar Ard Biesheuvel Committed by Russell King

ARM: 8220/1: allow modules outside of bl range

Loading modules far away from the kernel in memory is problematic
because the 'bl' instruction only has limited reach, and modules are not
built with PLTs. Instead of using the -mlong-calls option (which affects
all compiler emitted bl instructions, but not the ones in assembler),
this patch allocates some additional space at module load time, and
populates it with PLT like veneers when encountering relocations that
are out of range.

This should work with all relocations against symbols exported by the
kernel, including those resulting from GCC generated implicit function
calls for ftrace etc.

The module memory size increases by about 5% on average, regardless of
whether any PLT entries were actually needed. However, due to the page
based rounding that occurs when allocating module memory, the average
memory footprint increase is negligible.
Reviewed-by: default avatarNicolas Pitre <nico@linaro.org>
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent e748994f
......@@ -60,7 +60,7 @@ config ARM
select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_MEMBLOCK
select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_OPTPROBES if !THUMB2_KERNEL
select HAVE_PERF_EVENTS
......@@ -1681,6 +1681,21 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
config ARM_MODULE_PLTS
bool "Use PLTs to allow module memory to spill over into vmalloc area"
depends on MODULES
help
Allocate PLTs when loading modules so that jumps and calls whose
targets are too far away for their relative offsets to be encoded
in the instructions themselves can be bounced via veneers in the
module's PLT. This allows modules to be allocated in the generic
vmalloc area after the dedicated module memory area has been
exhausted. The modules will use slightly more memory, but after
rounding up to page size, the actual memory footprint is usually
the same.
Say y if you are getting out of memory errors while loading modules
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
......
......@@ -19,6 +19,10 @@ LDFLAGS_vmlinux += --be8
LDFLAGS_MODULE += --be8
endif
ifeq ($(CONFIG_ARM_MODULE_PLTS),y)
LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds
endif
OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
......
......@@ -16,11 +16,21 @@ enum {
ARM_SEC_UNLIKELY,
ARM_SEC_MAX,
};
#endif
struct mod_arch_specific {
#ifdef CONFIG_ARM_UNWIND
struct unwind_table *unwind[ARM_SEC_MAX];
};
#endif
#ifdef CONFIG_ARM_MODULE_PLTS
struct elf32_shdr *core_plt;
struct elf32_shdr *init_plt;
int core_plt_count;
int init_plt_count;
#endif
};
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
/*
* Add the ARM architecture version to the version magic string
......
......@@ -34,6 +34,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_FIQ) += fiq.o fiqasm.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
......
/*
* Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/elf.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/cache.h>
#include <asm/opcodes.h>
#define PLT_ENT_STRIDE L1_CACHE_BYTES
#define PLT_ENT_COUNT (PLT_ENT_STRIDE / sizeof(u32))
#define PLT_ENT_SIZE (sizeof(struct plt_entries) / PLT_ENT_COUNT)
#ifdef CONFIG_THUMB2_KERNEL
#define PLT_ENT_LDR __opcode_to_mem_thumb32(0xf8dff000 | \
(PLT_ENT_STRIDE - 4))
#else
#define PLT_ENT_LDR __opcode_to_mem_arm(0xe59ff000 | \
(PLT_ENT_STRIDE - 8))
#endif
struct plt_entries {
u32 ldr[PLT_ENT_COUNT];
u32 lit[PLT_ENT_COUNT];
};
static bool in_init(const struct module *mod, u32 addr)
{
return addr - (u32)mod->module_init < mod->init_size;
}
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
{
struct plt_entries *plt, *plt_end;
int c, *count;
if (in_init(mod, loc)) {
plt = (void *)mod->arch.init_plt->sh_addr;
plt_end = (void *)plt + mod->arch.init_plt->sh_size;
count = &mod->arch.init_plt_count;
} else {
plt = (void *)mod->arch.core_plt->sh_addr;
plt_end = (void *)plt + mod->arch.core_plt->sh_size;
count = &mod->arch.core_plt_count;
}
/* Look for an existing entry pointing to 'val' */
for (c = *count; plt < plt_end; c -= PLT_ENT_COUNT, plt++) {
int i;
if (!c) {
/* Populate a new set of entries */
*plt = (struct plt_entries){
{ [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, },
{ val, }
};
++*count;
return (u32)plt->ldr;
}
for (i = 0; i < PLT_ENT_COUNT; i++) {
if (!plt->lit[i]) {
plt->lit[i] = val;
++*count;
}
if (plt->lit[i] == val)
return (u32)&plt->ldr[i];
}
}
BUG();
}
static int duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num,
u32 mask)
{
u32 *loc1, *loc2;
int i;
for (i = 0; i < num; i++) {
if (rel[i].r_info != rel[num].r_info)
continue;
/*
* Identical relocation types against identical symbols can
* still result in different PLT entries if the addend in the
* place is different. So resolve the target of the relocation
* to compare the values.
*/
loc1 = (u32 *)(base + rel[i].r_offset);
loc2 = (u32 *)(base + rel[num].r_offset);
if (((*loc1 ^ *loc2) & mask) == 0)
return 1;
}
return 0;
}
/* Count how many PLT entries we may need */
static unsigned int count_plts(Elf32_Addr base, const Elf32_Rel *rel, int num)
{
unsigned int ret = 0;
int i;
/*
* Sure, this is order(n^2), but it's usually short, and not
* time critical
*/
for (i = 0; i < num; i++)
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_ARM_CALL:
case R_ARM_PC24:
case R_ARM_JUMP24:
if (!duplicate_rel(base, rel, i,
__opcode_to_mem_arm(0x00ffffff)))
ret++;
break;
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
if (!duplicate_rel(base, rel, i,
__opcode_to_mem_thumb32(0x07ff2fff)))
ret++;
}
return ret;
}
int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
char *secstrings, struct module *mod)
{
unsigned long core_plts = 0, init_plts = 0;
Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
/*
* To store the PLTs, we expand the .text section for core module code
* and the .init.text section for initialization code.
*/
for (s = sechdrs; s < sechdrs_end; ++s)
if (strcmp(".core.plt", secstrings + s->sh_name) == 0)
mod->arch.core_plt = s;
else if (strcmp(".init.plt", secstrings + s->sh_name) == 0)
mod->arch.init_plt = s;
if (!mod->arch.core_plt || !mod->arch.init_plt) {
pr_err("%s: sections missing\n", mod->name);
return -ENOEXEC;
}
for (s = sechdrs + 1; s < sechdrs_end; ++s) {
const Elf32_Rel *rels = (void *)ehdr + s->sh_offset;
int numrels = s->sh_size / sizeof(Elf32_Rel);
Elf32_Shdr *dstsec = sechdrs + s->sh_info;
if (s->sh_type != SHT_REL)
continue;
if (strstr(secstrings + s->sh_name, ".init"))
init_plts += count_plts(dstsec->sh_addr, rels, numrels);
else
core_plts += count_plts(dstsec->sh_addr, rels, numrels);
}
mod->arch.core_plt->sh_type = SHT_NOBITS;
mod->arch.core_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.core_plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.core_plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.core_plt_count = 0;
mod->arch.init_plt->sh_type = SHT_NOBITS;
mod->arch.init_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.init_plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.init_plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.init_plt_count = 0;
pr_debug("%s: core.plt=%x, init.plt=%x\n", __func__,
mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size);
return 0;
}
......@@ -40,7 +40,12 @@
#ifdef CONFIG_MMU
void *module_alloc(unsigned long size)
{
return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
void *p = __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
if (!IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || p)
return p;
return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END,
GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
}
......@@ -110,6 +115,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
offset -= 0x04000000;
offset += sym->st_value - loc;
/*
* Route through a PLT entry if 'offset' exceeds the
* supported range. Note that 'offset + loc + 8'
* contains the absolute jump target, i.e.,
* @sym + addend, corrected for the +8 PC bias.
*/
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) &&
(offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000))
offset = get_module_plt(module, loc,
offset + loc + 8)
- loc - 8;
if (offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
......@@ -203,6 +222,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
offset -= 0x02000000;
offset += sym->st_value - loc;
/*
* Route through a PLT entry if 'offset' exceeds the
* supported range.
*/
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) &&
(offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000))
offset = get_module_plt(module, loc,
offset + loc + 4)
- loc - 4;
if (offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
......
SECTIONS {
.core.plt : { BYTE(0) }
.init.plt : { BYTE(0) }
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment