Commit 7d99b3ab authored by Ben Hutchings's avatar Ben Hutchings Committed by James Bottomley

[SCSI] isci, firmware: Remove isci fallback parameter blob and generator

This parameter blob and generator program have been moved to the
linux-firmware.git repository.
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 798edaad
# Makefile for create_fw
#
CC=gcc
CFLAGS=-c -Wall -O2 -g
LDFLAGS=
SOURCES=create_fw.c
OBJECTS=$(SOURCES:.cpp=.o)
EXECUTABLE=create_fw
all: $(SOURCES) $(EXECUTABLE)
$(EXECUTABLE): $(OBJECTS)
$(CC) $(LDFLAGS) $(OBJECTS) -o $@
.c.o:
$(CC) $(CFLAGS) $< -O $@
clean:
rm -f *.o $(EXECUTABLE)
This defines the temporary binary blow we are to pass to the SCU
driver to emulate the binary firmware that we will eventually be
able to access via NVRAM on the SCU controller.
The current size of the binary blob is expected to be 149 bytes or larger
Header Types:
0x1: Phy Masks
0x2: Phy Gens
0x3: SAS Addrs
0xff: End of Data
ID string - u8[12]: "#SCU MAGIC#\0"
Version - u8: 1
SubVersion - u8: 0
Header Type - u8: 0x1
Size - u8: 8
Phy Mask - u32[8]
Header Type - u8: 0x2
Size - u8: 8
Phy Gen - u32[8]
Header Type - u8: 0x3
Size - u8: 8
Sas Addr - u64[8]
Header Type - u8: 0xf
==============================================================================
Place isci_firmware.bin in /lib/firmware
Be sure to recreate the initramfs image to include the firmware.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <errno.h>
#include <asm/types.h>
#include <strings.h>
#include <stdint.h>
#include "create_fw.h"
#include "../probe_roms.h"
int write_blob(struct isci_orom *isci_orom)
{
FILE *fd;
int err;
size_t count;
fd = fopen(blob_name, "w+");
if (!fd) {
perror("Open file for write failed");
fclose(fd);
return -EIO;
}
count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd);
if (count != 1) {
perror("Write data failed");
fclose(fd);
return -EIO;
}
fclose(fd);
return 0;
}
void set_binary_values(struct isci_orom *isci_orom)
{
int ctrl_idx, phy_idx, port_idx;
/* setting OROM signature */
strncpy(isci_orom->hdr.signature, sig, strlen(sig));
isci_orom->hdr.version = version;
isci_orom->hdr.total_block_length = sizeof(struct isci_orom);
isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr);
isci_orom->hdr.num_elements = num_elements;
for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) {
isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type;
isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up =
max_num_concurrent_dev_spin_up;
isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc =
enable_ssc;
for (port_idx = 0; port_idx < 4; port_idx++)
isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask =
phy_mask[ctrl_idx][port_idx];
for (phy_idx = 0; phy_idx < 4; phy_idx++) {
isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high =
(__u32)(sas_addr[ctrl_idx][phy_idx] >> 32);
isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low =
(__u32)(sas_addr[ctrl_idx][phy_idx]);
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 =
afe_tx_amp_control0;
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 =
afe_tx_amp_control1;
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 =
afe_tx_amp_control2;
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 =
afe_tx_amp_control3;
}
}
}
int main(void)
{
int err;
struct isci_orom *isci_orom;
isci_orom = malloc(sizeof(struct isci_orom));
memset(isci_orom, 0, sizeof(struct isci_orom));
set_binary_values(isci_orom);
err = write_blob(isci_orom);
if (err < 0) {
free(isci_orom);
return err;
}
free(isci_orom);
return 0;
}
#ifndef _CREATE_FW_H_
#define _CREATE_FW_H_
#include "../probe_roms.h"
/* we are configuring for 2 SCUs */
static const int num_elements = 2;
/*
* For all defined arrays:
* elements 0-3 are for SCU0, ports 0-3
* elements 4-7 are for SCU1, ports 0-3
*
* valid configurations for one SCU are:
* P0 P1 P2 P3
* ----------------
* 0xF,0x0,0x0,0x0 # 1 x4 port
* 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
* # ports
* 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
* # port
* 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
* 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
*
* if there is a port/phy on which you do not wish to override the default
* values, use the value assigned to UNINIT_PARAM (255).
*/
/* discovery mode type (port auto config mode by default ) */
/*
* if there is a port/phy on which you do not wish to override the default
* values, use the value "0000000000000000". SAS address of zero's is
* considered invalid and will not be used.
*/
#ifdef MPC
static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
{1, 2, 4, 8} };
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
0x5FCFFFFFF0000002ULL,
0x5FCFFFFFF0000003ULL,
0x5FCFFFFFF0000004ULL },
{ 0x5FCFFFFFF0000005ULL,
0x5FCFFFFFF0000006ULL,
0x5FCFFFFFF0000007ULL,
0x5FCFFFFFF0000008ULL } };
#else /* APC (default) */
static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
static const __u8 phy_mask[2][4];
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
0x5FCFFFFF00000001ULL,
0x5FCFFFFF00000001ULL,
0x5FCFFFFF00000001ULL },
{ 0x5FCFFFFF00000002ULL,
0x5FCFFFFF00000002ULL,
0x5FCFFFFF00000002ULL,
0x5FCFFFFF00000002ULL } };
#endif
/* Maximum number of concurrent device spin up */
static const int max_num_concurrent_dev_spin_up = 1;
/* enable of ssc operation */
static const int enable_ssc;
/* AFE_TX_AMP_CONTROL */
static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
static const char blob_name[] = "isci_firmware.bin";
static const char sig[] = "ISCUOEMB";
static const unsigned char version = 0x10;
#endif
......@@ -82,7 +82,6 @@ fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
......
:10000000495343554F454D42E80018100002000087
:1000100000000000000000000101000000000000DE
:10002000FFFFCF5F0100000008DD0B0000FC0F00A8
:10003000097C0B006EFC0A00FFFFCF5F010000008F
:1000400008DD0B0000FC0F00097C0B006EFC0A00B1
:10005000FFFFCF5F0100000008DD0B0000FC0F0078
:10006000097C0B006EFC0A00FFFFCF5F010000005F
:1000700008DD0B0000FC0F00097C0B006EFC0A0081
:100080000101000000000000FFFFCF5F0200000040
:1000900008DD0B0000FC0F00097C0B006EFC0A0061
:1000A000FFFFCF5F0200000008DD0B0000FC0F0027
:1000B000097C0B006EFC0A00FFFFCF5F020000000E
:1000C00008DD0B0000FC0F00097C0B006EFC0A0031
:1000D000FFFFCF5F0200000008DD0B0000FC0F00F7
:0800E000097C0B006EFC0A0014
:00000001FF
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment