MIPS: Malta: Use gic_read_count() to read GIC timer

Instead of reading the GIC registers directly, use the interface the GIC
driver already exposes for reading the global timer.  Also get rid of
the unnecessary #ifdefs.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8123/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/mti-malta/malta-time.c

@@ -70,9 +70,7 @@ static void __init estimate_frequencies(void)
 {
 	unsigned long flags;
 	unsigned int count, start;
-#ifdef CONFIG_MIPS_GIC
-	unsigned int giccount = 0, gicstart = 0;
-#endif
+	cycle_t giccount = 0, gicstart = 0;
 
 #if defined(CONFIG_KVM_GUEST) && CONFIG_KVM_GUEST_TIMER_FREQ
 	mips_hpt_frequency = CONFIG_KVM_GUEST_TIMER_FREQ * 1000000;
@@ -87,32 +85,26 @@ static void __init estimate_frequencies(void)
 
 	/* Initialize counters. */
 	start = read_c0_count();
-#ifdef CONFIG_MIPS_GIC
 	if (gic_present)
-		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart);
-#endif
+		gicstart = gic_read_count();
 
 	/* Read counter exactly on falling edge of update flag. */
 	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
 	count = read_c0_count();
-#ifdef CONFIG_MIPS_GIC
 	if (gic_present)
-		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount);
-#endif
+		giccount = gic_read_count();
 
 	local_irq_restore(flags);
 
 	count -= start;
 	mips_hpt_frequency = count;
 
-#ifdef CONFIG_MIPS_GIC
 	if (gic_present) {
 		giccount -= gicstart;
 		gic_frequency = giccount;
 	}
-#endif
 }
 
 void read_persistent_clock(struct timespec *ts)