Merge branch 'topic/edma' into for-linus

Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Conflicts:
	drivers/dma/edma.c

Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt

@@ -2,9 +2,10 @@ Texas Instruments DMA Crossbar (DMA request router)
 
 Required properties:
 - compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
+		"ti,am335x-edma-crossbar" for AM335x and AM437x
 - reg:		Memory map for accessing module
-- #dma-cells:	Should be set to <1>.
-		Clients should use the crossbar request number (input)
+- #dma-cells:	Should be set to to match with the DMA controller's dma-cells
+		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
 - dma-requests:	Number of DMA requests the crossbar can receive
 - dma-masters:	phandle pointing to the DMA controller
 
@@ -14,6 +15,15 @@ The DMA controller node need to have the following poroperties:
 Optional properties:
 - ti,dma-safe-map: Safe routing value for unused request lines
 
+Notes:
+When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
+the DMA event number as crossbar ID (input to the DMA crossbar).
+
+For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients:
+dmas = <&edma_xbar 12 0 1>; where <12> is the DMA request number, <0> is the TC
+the event should be assigned and <1> is the mux selection for in the crossbar.
+When mux 0 is used the DMA channel can be requested directly from edma node.
+
 Example:
 
 /* DMA controller */
@@ -47,6 +57,7 @@ uart1: serial@4806a000 {
 	ti,hwmods = "uart1";
 	clock-frequency = <48000000>;
 	status = "disabled";
+	/* Requesting crossbar input 49 and 50 */
 	dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 	dma-names = "tx", "rx";
 };

Documentation/devicetree/bindings/dma/ti-edma.txt

-TI EDMA
+Texas Instruments eDMA
+
+The eDMA3 consists of two components: Channel controller (CC) and Transfer
+Controller(s) (TC). The CC is the main entry for DMA users since it is
+responsible for the DMA channel handling, while the TCs are responsible to
+execute the actual DMA tansfer.
+
+------------------------------------------------------------------------------
+eDMA3 Channel Controller
+
+Required properties:
+- compatible:	"ti,edma3-tpcc" for the channel controller(s)
+- #dma-cells:	Should be set to <2>. The first number is the DMA request
+		number and the second is the TC the channel is serviced on.
+- reg:		Memory map of eDMA CC
+- reg-names:	"edma3_cc"
+- interrupts:	Interrupt lines for CCINT, MPERR and CCERRINT.
+- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint"
+- ti,tptcs:	List of TPTCs associated with the eDMA in the following form:
+		<&tptc_phandle TC_priority_number>. The highest priority is 0.
+
+Optional properties:
+- ti,hwmods:	Name of the hwmods associated to the eDMA CC
+- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
+		these channels will be SW triggered channels. The list must
+		contain 16 bits numbers, see example.
+- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
+		the driver, they are allocated to be used by for example the
+		DSP. See example.
+
+------------------------------------------------------------------------------
+eDMA3 Transfer Controller
+
+Required properties:
+- compatible:	"ti,edma3-tptc" for the transfer controller(s)
+- reg:		Memory map of eDMA TC
+- interrupts:	Interrupt number for TCerrint.
+
+Optional properties:
+- ti,hwmods:	Name of the hwmods associated to the given eDMA TC
+- interrupt-names: "edma3_tcerrint"
+
+------------------------------------------------------------------------------
+Example:
+
+edma: edma@49000000 {
+	compatible = "ti,edma3-tpcc";
+	ti,hwmods = "tpcc";
+	reg =	<0x49000000 0x10000>;
+	reg-names = "edma3_cc";
+	interrupts = <12 13 14>;
+	interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint";
+	dma-requests = <64>;
+	#dma-cells = <2>;
+
+	ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
+
+	/* Channel 20 and 21 is allocated for memcpy */
+	ti,edma-memcpy-channels = /bits/ 16 <20 21>;
+	/* The following PaRAM slots are reserved: 35-45 and 100-110 */
+	ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
+				       /bits/ 16 <100 10>;
+};
+
+edma_tptc0: tptc@49800000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc0";
+	reg =	<0x49800000 0x100000>;
+	interrupts = <112>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc1: tptc@49900000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc1";
+	reg =	<0x49900000 0x100000>;
+	interrupts = <113>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc2: tptc@49a00000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc2";
+	reg =	<0x49a00000 0x100000>;
+	interrupts = <114>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+sham: sham@53100000 {
+	compatible = "ti,omap4-sham";
+	ti,hwmods = "sham";
+	reg = <0x53100000 0x200>;
+	interrupts = <109>;
+	/* DMA channel 36 executed on eDMA TC0 - low priority queue */
+	dmas = <&edma 36 0>;
+	dma-names = "rx";
+};
+
+mcasp0: mcasp@48038000 {
+	compatible = "ti,am33xx-mcasp-audio";
+	ti,hwmods = "mcasp0";
+	reg = <0x48038000 0x2000>,
+		<0x46000000 0x400000>;
+	reg-names = "mpu", "dat";
+	interrupts = <80>, <81>;
+	interrupt-names = "tx", "rx";
+	status = "disabled";
+	/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
+	dmas = <&edma 8 2>,
+	       <&edma 9 2>;
+	dma-names = "tx", "rx";
+};
+
+------------------------------------------------------------------------------
+DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
+binding.
 
 Required properties:
 - compatible : "ti,edma3"

arch/arm/Kconfig

@@ -736,7 +736,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
 	help

arch/arm/boot/dts/am335x-evm.dts

@@ -743,8 +743,8 @@ &mmc1 {
 &mmc3 {
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
@@ -766,11 +766,6 @@ wlcore: wlcore@0 {
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
 &sham {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-pepper.dts

@@ -339,13 +339,6 @@ &mmc2 {
 	ti,non-removable;
 };
 
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
 &mmc3 {
 	/* Wifi & Bluetooth on MMC #3 */
 	status = "okay";
@@ -354,8 +347,8 @@ &mmc3 {
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
 	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 };
 

arch/arm/boot/dts/am33xx.dtsi

@@ -174,12 +174,54 @@ intc: interrupt-controller@48200000 {
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = /bits/ 16 <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_xbar: dma-router@44e10f90 {
+			compatible = "ti,am335x-edma-crossbar";
+			reg = <0x44e10f90 0x40>;
+
+			#dma-cells = <3>;
+			dma-requests = <32>;
+
+			dma-masters = <&edma>;
 		};
 
 		gpio0: gpio@44e07000 {
@@ -233,7 +275,7 @@ uart0: serial@44e09000 {
 			reg = <0x44e09000 0x2000>;
 			interrupts = <72>;
 			status = "disabled";
-			dmas = <&edma 26>, <&edma 27>;
+			dmas = <&edma 26 0>, <&edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -244,7 +286,7 @@ uart1: serial@48022000 {
 			reg = <0x48022000 0x2000>;
 			interrupts = <73>;
 			status = "disabled";
-			dmas = <&edma 28>, <&edma 29>;
+			dmas = <&edma 28 0>, <&edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -255,7 +297,7 @@ uart2: serial@48024000 {
 			reg = <0x48024000 0x2000>;
 			interrupts = <74>;
 			status = "disabled";
-			dmas = <&edma 30>, <&edma 31>;
+			dmas = <&edma 30 0>, <&edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -322,8 +364,8 @@ mmc1: mmc@48060000 {
 			ti,dual-volt;
 			ti,needs-special-reset;
 			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma_xbar 24 0 0
+				&edma_xbar 25 0 0>;
 			dma-names = "tx", "rx";
 			interrupts = <64>;
 			interrupt-parent = <&intc>;
@@ -335,8 +377,8 @@ mmc2: mmc@481d8000 {
 			compatible = "ti,omap4-hsmmc";
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0
+				&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <28>;
 			interrupt-parent = <&intc>;
@@ -474,10 +516,10 @@ spi0: spi@48030000 {
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
+			dmas = <&edma 16 0
+				&edma 17 0
+				&edma 18 0
+				&edma 19 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -490,10 +532,10 @@ spi1: spi@481a0000 {
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
+			dmas = <&edma 42 0
+				&edma 43 0
+				&edma 44 0
+				&edma 45 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -831,7 +873,7 @@ sham: sham@53100000 {
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x200>;
 			interrupts = <109>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 		};
 
@@ -840,8 +882,8 @@ aes: aes@53500000 {
 			ti,hwmods = "aes";
 			reg = <0x53500000 0xa0>;
 			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
+			dmas = <&edma 6 0>,
+			       <&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -854,8 +896,8 @@ mcasp0: mcasp@48038000 {
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
+			dmas = <&edma 8 2>,
+				<&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -868,8 +910,8 @@ mcasp1: mcasp@4803C000 {
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
+			dmas = <&edma 10 2>,
+				<&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 

arch/arm/boot/dts/am4372.dtsi

@@ -183,14 +183,56 @@ emif: emif@4c000000 {
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = /bits/ 16 <32 33>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_xbar: dma-router@44e10f90 {
+			compatible = "ti,am335x-edma-crossbar";
+			reg = <0x44e10f90 0x40>;
+
+			#dma-cells = <3>;
+			dma-requests = <64>;
+
+			dma-masters = <&edma>;
 		};
 
 		uart0: serial@44e09000 {
@@ -495,8 +537,8 @@ mmc1: mmc@48060000 {
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma 24 0>,
+				<&edma 25 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -507,8 +549,8 @@ mmc2: mmc@481d8000 {
 			reg = <0x481d8000 0x1000>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0>,
+				<&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -775,7 +817,7 @@ sham: sham@53100000 {
 			compatible = "ti,omap5-sham";
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -785,8 +827,8 @@ aes: aes@53501000 {
 			ti,hwmods = "aes";
 			reg = <0x53501000 0xa0>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
+			dmas = <&edma 6 0>,
+				<&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -795,8 +837,8 @@ des: des@53701000 {
 			ti,hwmods = "des";
 			reg = <0x53701000 0xa0>;
 			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
+			dmas = <&edma 34 0>,
+				<&edma 33 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -809,8 +851,8 @@ mcasp0: mcasp@48038000 {
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
+			dmas = <&edma 8 2>,
+			       <&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -823,8 +865,8 @@ mcasp1: mcasp@4803C000 {
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
+			dmas = <&edma 10 2>,
+			       <&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -711,8 +711,8 @@ &mmc3 {
 	status = "okay";
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 30
-		&edma 31>;
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
 	dma-names = "tx", "rx";
 	vmmc-supply = <&vmmcwl_fixed>;
 	bus-width = <4>;
@@ -733,11 +733,6 @@ wlcore: wlcore@0 {
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 30
-					    2 31>;
-};
-
 &uart3 {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/common/Kconfig

@@ -17,6 +17,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config TI_PRIV_EDMA
-	bool

arch/arm/common/Makefile

@@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
-obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o

arch/arm/mach-davinci/devices-da8xx.c

@@ -147,150 +147,118 @@ static s8 da850_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da830_edma_cc0_info = {
+static struct edma_soc_info da8xx_edma0_pdata = {
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
-	&da830_edma_cc0_info,
+static struct edma_soc_info da850_edma1_pdata = {
+	.queue_priority_mapping	= da850_queue_priority_mapping,
+	.default_queue		= EVENTQ_0,
 };
 
-static struct edma_soc_info da850_edma_cc_info[] = {
+static struct resource da8xx_edma0_resources[] = {
 	{
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-		.default_queue		= EVENTQ_1,
-	},
-	{
-		.queue_priority_mapping	= da850_queue_priority_mapping,
-		.default_queue		= EVENTQ_0,
-	},
-};
-
-static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
-	&da850_edma_cc_info[0],
-	&da850_edma_cc_info[1],
-};
-
-static struct resource da830_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= DA8XX_TPCC_BASE,
 		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= DA8XX_TPTC0_BASE,
 		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= DA8XX_TPTC1_BASE,
 		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA8XX_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA8XX_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct resource da850_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource da850_edma1_resources[] = {
 	{
-		.name	= "edma_cc1",
+		.name	= "edma3_cc",
 		.start	= DA850_TPCC1_BASE,
 		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc0",
 		.start	= DA850_TPTC2_BASE,
 		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
-		.start	= IRQ_DA8XX_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_DA8XX_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma1",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA850_CCINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma1_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA850_CCERRINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device da830_edma_device = {
+static const struct platform_device_info da8xx_edma0_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da830_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da830_edma_resources),
-	.resource	= da830_edma_resources,
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da8xx_edma0_resources,
+	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
+	.data		= &da8xx_edma0_pdata,
+	.size_data	= sizeof(da8xx_edma0_pdata),
 };
 
-static struct platform_device da850_edma_device = {
+static const struct platform_device_info da850_edma1_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da850_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da850_edma_resources),
-	.resource	= da850_edma_resources,
+	.id		= 1,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da850_edma1_resources,
+	.num_res	= ARRAY_SIZE(da850_edma1_resources),
+	.data		= &da850_edma1_pdata,
+	.size_data	= sizeof(da850_edma1_pdata),
 };
 
 int __init da830_register_edma(struct edma_rsv_info *rsv)
 {
-	da830_edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	da8xx_edma0_pdata.rsv = rsv;
 
-	return platform_device_register(&da830_edma_device);
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 int __init da850_register_edma(struct edma_rsv_info *rsv[2])
 {
+	struct platform_device *edma_pdev;
+
 	if (rsv) {
-		da850_edma_cc_info[0].rsv = rsv[0];
-		da850_edma_cc_info[1].rsv = rsv[1];
+		da8xx_edma0_pdata.rsv = rsv[0];
+		da850_edma1_pdata.rsv = rsv[1];
 	}
 
-	return platform_device_register(&da850_edma_device);
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA0\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
+	edma_pdev = platform_device_register_full(&da850_edma1_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 static struct resource da8xx_i2c_resources0[] = {

arch/arm/mach-davinci/dm355.c

@@ -569,61 +569,58 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm355_edma_pdata = {
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
-       &edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using (or muxing) TC*_ERR */
 };
 
-static struct platform_device dm355_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm355_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm355_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm355_edma_pdata,
+	.size_data	= sizeof(dm355_edma_pdata),
 };
 
 static struct resource dm355_asp1_resources[] = {
@@ -1062,13 +1059,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm355_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	platform_device_register(&dm355_edma_device);
+	edma_pdev = platform_device_register_full(&dm355_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	ret = davinci_init_wdt();
 	if (ret)

arch/arm/mach-davinci/dm365.c

@@ -853,8 +853,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 };
 
 /* Four Transfer Controllers on DM365 */
-static s8
-dm365_queue_priority_mapping[][2] = {
+static s8 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
 	{1, 7},
@@ -863,53 +862,49 @@ dm365_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm365_edma_pdata = {
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
 };
 
-static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -919,7 +914,7 @@ static struct resource edma_resources[] = {
 static struct platform_device dm365_edma_device = {
 	.name			= "edma",
 	.id			= 0,
-	.dev.platform_data	= dm365_edma_info,
+	.dev.platform_data	= &dm365_edma_pdata,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };

arch/arm/mach-davinci/dm644x.c

@@ -498,61 +498,58 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm644x_edma_pdata = {
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm644x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm644x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm644x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm644x_edma_pdata,
+	.size_data	= sizeof(dm644x_edma_pdata),
 };
 
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
@@ -950,12 +947,17 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm644x_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
-	platform_device_register(&dm644x_edma_device);
+	edma_pdev = platform_device_register_full(&dm644x_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);

arch/arm/mach-davinci/dm646x.c

@@ -531,8 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 /* Four Transfer Controllers on DM646x */
-static s8
-dm646x_queue_priority_mapping[][2] = {
+static s8 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
 	{1, 0},
@@ -541,65 +540,63 @@ dm646x_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm646x_edma_pdata = {
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm646x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm646x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm646x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm646x_edma_pdata,
+	.size_data	= sizeof(dm646x_edma_pdata),
 };
 
 static struct resource dm646x_mcasp0_resources[] = {
@@ -936,9 +933,12 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 
 int __init dm646x_init_edma(struct edma_rsv_info *rsv)
 {
-	edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	dm646x_edma_pdata.rsv = rsv;
 
-	return platform_device_register(&dm646x_edma_device);
+	edma_pdev = platform_device_register_full(&dm646x_edma_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 void __init dm646x_init(void)

arch/arm/mach-omap2/Kconfig

@@ -90,7 +90,6 @@ config ARCH_OMAP2PLUS
 	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
-	select TI_PRIV_EDMA
 	select OMAP_IRQCHIP
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5

drivers/dma/Kconfig

@@ -486,7 +486,7 @@ config TI_EDMA
 	depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
-	select TI_PRIV_EDMA
+	select TI_DMA_CROSSBAR if ARCH_OMAP
 	default n
 	help
 	  Enable support for the TI EDMA controller. This DMA

drivers/dma/ti-dma-crossbar.c

@@ -17,13 +17,184 @@
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
 
-#define TI_XBAR_OUTPUTS	127
-#define TI_XBAR_INPUTS	256
+#define TI_XBAR_DRA7		0
+#define TI_XBAR_AM335X		1
+
+static const struct of_device_id ti_dma_xbar_match[] = {
+	{
+		.compatible = "ti,dra7-dma-crossbar",
+		.data = (void *)TI_XBAR_DRA7,
+	},
+	{
+		.compatible = "ti,am335x-edma-crossbar",
+		.data = (void *)TI_XBAR_AM335X,
+	},
+	{},
+};
+
+/* Crossbar on AM335x/AM437x family */
+#define TI_AM335X_XBAR_LINES	64
+
+struct ti_am335x_xbar_data {
+	void __iomem *iomem;
+
+	struct dma_router dmarouter;
+
+	u32 xbar_events; /* maximum number of events to select in xbar */
+	u32 dma_requests; /* number of DMA requests on eDMA */
+};
+
+struct ti_am335x_xbar_map {
+	u16 dma_line;
+	u16 mux_val;
+};
+
+static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u16 val)
+{
+	writeb_relaxed(val & 0x1f, iomem + event);
+}
+
+static void ti_am335x_xbar_free(struct device *dev, void *route_data)
+{
+	struct ti_am335x_xbar_data *xbar = dev_get_drvdata(dev);
+	struct ti_am335x_xbar_map *map = route_data;
+
+	dev_dbg(dev, "Unmapping XBAR event %u on channel %u\n",
+		map->mux_val, map->dma_line);
+
+	ti_am335x_xbar_write(xbar->iomem, map->dma_line, 0);
+	kfree(map);
+}
+
+static void *ti_am335x_xbar_route_allocate(struct of_phandle_args *dma_spec,
+					   struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct ti_am335x_xbar_data *xbar = platform_get_drvdata(pdev);
+	struct ti_am335x_xbar_map *map;
+
+	if (dma_spec->args_count != 3)
+		return ERR_PTR(-EINVAL);
+
+	if (dma_spec->args[2] >= xbar->xbar_events) {
+		dev_err(&pdev->dev, "Invalid XBAR event number: %d\n",
+			dma_spec->args[2]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dma_spec->args[0] >= xbar->dma_requests) {
+		dev_err(&pdev->dev, "Invalid DMA request line number: %d\n",
+			dma_spec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* The of_node_put() will be done in the core for the node */
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "Can't get DMA master\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map) {
+		of_node_put(dma_spec->np);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	map->dma_line = (u16)dma_spec->args[0];
+	map->mux_val = (u16)dma_spec->args[2];
+
+	dma_spec->args[2] = 0;
+	dma_spec->args_count = 2;
+
+	dev_dbg(&pdev->dev, "Mapping XBAR event%u to DMA%u\n",
+		map->mux_val, map->dma_line);
+
+	ti_am335x_xbar_write(xbar->iomem, map->dma_line, map->mux_val);
+
+	return map;
+}
+
+static const struct of_device_id ti_am335x_master_match[] = {
+	{ .compatible = "ti,edma3-tpcc", },
+	{},
+};
+
+static int ti_am335x_xbar_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dma_node;
+	struct ti_am335x_xbar_data *xbar;
+	struct resource *res;
+	void __iomem *iomem;
+	int i, ret;
+
+	if (!node)
+		return -ENODEV;
+
+	xbar = devm_kzalloc(&pdev->dev, sizeof(*xbar), GFP_KERNEL);
+	if (!xbar)
+		return -ENOMEM;
+
+	dma_node = of_parse_phandle(node, "dma-masters", 0);
+	if (!dma_node) {
+		dev_err(&pdev->dev, "Can't get DMA master node\n");
+		return -ENODEV;
+	}
+
+	match = of_match_node(ti_am335x_master_match, dma_node);
+	if (!match) {
+		dev_err(&pdev->dev, "DMA master is not supported\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(dma_node, "dma-requests",
+				 &xbar->dma_requests)) {
+		dev_info(&pdev->dev,
+			 "Missing XBAR output information, using %u.\n",
+			 TI_AM335X_XBAR_LINES);
+		xbar->dma_requests = TI_AM335X_XBAR_LINES;
+	}
+	of_node_put(dma_node);
+
+	if (of_property_read_u32(node, "dma-requests", &xbar->xbar_events)) {
+		dev_info(&pdev->dev,
+			 "Missing XBAR input information, using %u.\n",
+			 TI_AM335X_XBAR_LINES);
+		xbar->xbar_events = TI_AM335X_XBAR_LINES;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(iomem))
+		return PTR_ERR(iomem);
+
+	xbar->iomem = iomem;
+
+	xbar->dmarouter.dev = &pdev->dev;
+	xbar->dmarouter.route_free = ti_am335x_xbar_free;
+
+	platform_set_drvdata(pdev, xbar);
+
+	/* Reset the crossbar */
+	for (i = 0; i < xbar->dma_requests; i++)
+		ti_am335x_xbar_write(xbar->iomem, i, 0);
+
+	ret = of_dma_router_register(node, ti_am335x_xbar_route_allocate,
+				     &xbar->dmarouter);
+
+	return ret;
+}
+
+/* Crossbar on DRA7xx family */
+#define TI_DRA7_XBAR_OUTPUTS	127
+#define TI_DRA7_XBAR_INPUTS	256
 
 #define TI_XBAR_EDMA_OFFSET	0
 #define TI_XBAR_SDMA_OFFSET	1
 
-struct ti_dma_xbar_data {
+struct ti_dra7_xbar_data {
 	void __iomem *iomem;
 
 	struct dma_router dmarouter;
@@ -35,35 +206,35 @@ struct ti_dma_xbar_data {
 	u32 dma_offset;
 };
 
-struct ti_dma_xbar_map {
+struct ti_dra7_xbar_map {
 	u16 xbar_in;
 	int xbar_out;
 };
 
-static inline void ti_dma_xbar_write(void __iomem *iomem, int xbar, u16 val)
+static inline void ti_dra7_xbar_write(void __iomem *iomem, int xbar, u16 val)
 {
 	writew_relaxed(val, iomem + (xbar * 2));
 }
 
-static void ti_dma_xbar_free(struct device *dev, void *route_data)
+static void ti_dra7_xbar_free(struct device *dev, void *route_data)
 {
-	struct ti_dma_xbar_data *xbar = dev_get_drvdata(dev);
-	struct ti_dma_xbar_map *map = route_data;
+	struct ti_dra7_xbar_data *xbar = dev_get_drvdata(dev);
+	struct ti_dra7_xbar_map *map = route_data;
 
 	dev_dbg(dev, "Unmapping XBAR%u (was routed to %d)\n",
 		map->xbar_in, map->xbar_out);
 
-	ti_dma_xbar_write(xbar->iomem, map->xbar_out, xbar->safe_val);
+	ti_dra7_xbar_write(xbar->iomem, map->xbar_out, xbar->safe_val);
 	idr_remove(&xbar->map_idr, map->xbar_out);
 	kfree(map);
 }
 
-static void *ti_dma_xbar_route_allocate(struct of_phandle_args *dma_spec,
-					struct of_dma *ofdma)
+static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
 {
 	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
-	struct ti_dma_xbar_data *xbar = platform_get_drvdata(pdev);
-	struct ti_dma_xbar_map *map;
+	struct ti_dra7_xbar_data *xbar = platform_get_drvdata(pdev);
+	struct ti_dra7_xbar_map *map;
 
 	if (dma_spec->args[0] >= xbar->xbar_requests) {
 		dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
@@ -93,12 +264,12 @@ static void *ti_dma_xbar_route_allocate(struct of_phandle_args *dma_spec,
 	dev_dbg(&pdev->dev, "Mapping XBAR%u to DMA%d\n",
 		map->xbar_in, map->xbar_out);
 
-	ti_dma_xbar_write(xbar->iomem, map->xbar_out, map->xbar_in);
+	ti_dra7_xbar_write(xbar->iomem, map->xbar_out, map->xbar_in);
 
 	return map;
 }
 
-static const struct of_device_id ti_dma_master_match[] = {
+static const struct of_device_id ti_dra7_master_match[] = {
 	{
 		.compatible = "ti,omap4430-sdma",
 		.data = (void *)TI_XBAR_SDMA_OFFSET,
@@ -110,12 +281,12 @@ static const struct of_device_id ti_dma_master_match[] = {
 	{},
 };
 
-static int ti_dma_xbar_probe(struct platform_device *pdev)
+static int ti_dra7_xbar_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	const struct of_device_id *match;
 	struct device_node *dma_node;
-	struct ti_dma_xbar_data *xbar;
+	struct ti_dra7_xbar_data *xbar;
 	struct resource *res;
 	u32 safe_val;
 	void __iomem *iomem;
@@ -136,7 +307,7 @@ static int ti_dma_xbar_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	match = of_match_node(ti_dma_master_match, dma_node);
+	match = of_match_node(ti_dra7_master_match, dma_node);
 	if (!match) {
 		dev_err(&pdev->dev, "DMA master is not supported\n");
 		return -EINVAL;
@@ -146,16 +317,16 @@ static int ti_dma_xbar_probe(struct platform_device *pdev)
 				 &xbar->dma_requests)) {
 		dev_info(&pdev->dev,
 			 "Missing XBAR output information, using %u.\n",
-			 TI_XBAR_OUTPUTS);
-		xbar->dma_requests = TI_XBAR_OUTPUTS;
+			 TI_DRA7_XBAR_OUTPUTS);
+		xbar->dma_requests = TI_DRA7_XBAR_OUTPUTS;
 	}
 	of_node_put(dma_node);
 
 	if (of_property_read_u32(node, "dma-requests", &xbar->xbar_requests)) {
 		dev_info(&pdev->dev,
 			 "Missing XBAR input information, using %u.\n",
-			 TI_XBAR_INPUTS);
-		xbar->xbar_requests = TI_XBAR_INPUTS;
+			 TI_DRA7_XBAR_INPUTS);
+		xbar->xbar_requests = TI_DRA7_XBAR_INPUTS;
 	}
 
 	if (!of_property_read_u32(node, "ti,dma-safe-map", &safe_val))
@@ -169,30 +340,50 @@ static int ti_dma_xbar_probe(struct platform_device *pdev)
 	xbar->iomem = iomem;
 
 	xbar->dmarouter.dev = &pdev->dev;
-	xbar->dmarouter.route_free = ti_dma_xbar_free;
+	xbar->dmarouter.route_free = ti_dra7_xbar_free;
 	xbar->dma_offset = (u32)match->data;
 
 	platform_set_drvdata(pdev, xbar);
 
 	/* Reset the crossbar */
 	for (i = 0; i < xbar->dma_requests; i++)
-		ti_dma_xbar_write(xbar->iomem, i, xbar->safe_val);
+		ti_dra7_xbar_write(xbar->iomem, i, xbar->safe_val);
 
-	ret = of_dma_router_register(node, ti_dma_xbar_route_allocate,
+	ret = of_dma_router_register(node, ti_dra7_xbar_route_allocate,
 				     &xbar->dmarouter);
 	if (ret) {
 		/* Restore the defaults for the crossbar */
 		for (i = 0; i < xbar->dma_requests; i++)
-			ti_dma_xbar_write(xbar->iomem, i, i);
+			ti_dra7_xbar_write(xbar->iomem, i, i);
 	}
 
 	return ret;
 }
 
-static const struct of_device_id ti_dma_xbar_match[] = {
-	{ .compatible = "ti,dra7-dma-crossbar" },
-	{},
-};
+static int ti_dma_xbar_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	int ret;
+
+	match = of_match_node(ti_dma_xbar_match, pdev->dev.of_node);
+	if (unlikely(!match))
+		return -EINVAL;
+
+	switch ((u32)match->data) {
+	case TI_XBAR_DRA7:
+		ret = ti_dra7_xbar_probe(pdev);
+		break;
+	case TI_XBAR_AM335X:
+		ret = ti_am335x_xbar_probe(pdev);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported crossbar\n");
+		ret = -ENODEV;
+		break;
+	}
+
+	return ret;
+}
 
 static struct platform_driver ti_dma_xbar_driver = {
 	.driver = {

include/linux/platform_data/edma.h

@@ -41,51 +41,6 @@
 #ifndef EDMA_H_
 #define EDMA_H_
 
-/* PaRAM slots are laid out like this */
-struct edmacc_param {
-	u32 opt;
-	u32 src;
-	u32 a_b_cnt;
-	u32 dst;
-	u32 src_dst_bidx;
-	u32 link_bcntrld;
-	u32 src_dst_cidx;
-	u32 ccnt;
-} __packed;
-
-/* fields in edmacc_param.opt */
-#define SAM		BIT(0)
-#define DAM		BIT(1)
-#define SYNCDIM		BIT(2)
-#define STATIC		BIT(3)
-#define EDMA_FWID	(0x07 << 8)
-#define TCCMODE		BIT(11)
-#define EDMA_TCC(t)	((t) << 12)
-#define TCINTEN		BIT(20)
-#define ITCINTEN	BIT(21)
-#define TCCHEN		BIT(22)
-#define ITCCHEN		BIT(23)
-
-/*ch_status paramater of callback function possible values*/
-#define EDMA_DMA_COMPLETE 1
-#define EDMA_DMA_CC_ERROR 2
-#define EDMA_DMA_TC1_ERROR 3
-#define EDMA_DMA_TC2_ERROR 4
-
-enum address_mode {
-	INCR = 0,
-	FIFO = 1
-};
-
-enum fifo_width {
-	W8BIT = 0,
-	W16BIT = 1,
-	W32BIT = 2,
-	W64BIT = 3,
-	W128BIT = 4,
-	W256BIT = 5
-};
-
 enum dma_event_q {
 	EVENTQ_0 = 0,
 	EVENTQ_1 = 1,
@@ -94,64 +49,10 @@ enum dma_event_q {
 	EVENTQ_DEFAULT = -1
 };
 
-enum sync_dimension {
-	ASYNC = 0,
-	ABSYNC = 1
-};
-
 #define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
 #define EDMA_CTLR(i)			((i) >> 16)
 #define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
 
-#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
-#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
-#define EDMA_CONT_PARAMS_ANY		 1001
-#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
-#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
-
-#define EDMA_MAX_CC               2
-
-/* alloc/free DMA channels and their dedicated parameter RAM slots */
-int edma_alloc_channel(int channel,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data, enum dma_event_q);
-void edma_free_channel(unsigned channel);
-
-/* alloc/free parameter RAM slots */
-int edma_alloc_slot(unsigned ctlr, int slot);
-void edma_free_slot(unsigned slot);
-
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
-/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width);
-dma_addr_t edma_get_position(unsigned slot, bool dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode);
-void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
-
-/* calls that operate on an entire parameter RAM slot */
-void edma_write_slot(unsigned slot, const struct edmacc_param *params);
-void edma_read_slot(unsigned slot, struct edmacc_param *params);
-
-/* channel control operations */
-int edma_start(unsigned channel);
-void edma_stop(unsigned channel);
-void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
-void edma_pause(unsigned channel);
-void edma_resume(unsigned channel);
-
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no);
-
 struct edma_rsv_info {
 
 	const s16	(*rsv_chans)[2];
@@ -170,10 +71,11 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
+	/* List of channels allocated for memcpy, terminated with -1 */
+	s16			*memcpy_channels;
+
 	s8	(*queue_priority_mapping)[2];
 	const s16	(*xbar_chans)[2];
 };
 
-int edma_trigger_channel(unsigned);
-
 #endif