Commit 7d9e7e9f authored by Paul Parsons's avatar Paul Parsons Committed by Samuel Ortiz

leds: Add ASIC3 LED support

Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
Signed-off-by: default avatarPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 4a7c00cd
......@@ -389,6 +389,16 @@ config LEDS_NETXBIG
and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
controlled through a GPIO extension bus.
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
depends on MFD_ASIC3
default y
help
This option enables support for the LEDs on the HTC ASIC3. The HTC
ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
cannot be used. This driver supports hardware blinking with an on+off
period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
......
......@@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
......
/*
* Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/mfd/asic3.h>
#include <linux/mfd/core.h>
/*
* The HTC ASIC3 LED GPIOs are inputs, not outputs.
* Hence we turn the LEDs on/off via the TimeBase register.
*/
/*
* When TimeBase is 4 the clock resolution is about 32Hz.
* This driver supports hardware blinking with an on+off
* period from 62ms (2 clocks) to 125s (4000 clocks).
*/
#define MS_TO_CLK(ms) DIV_ROUND_CLOSEST(((ms)*1024), 32000)
#define CLK_TO_MS(clk) (((clk)*32000)/1024)
#define MAX_CLK 4000 /* Fits into 12-bit Time registers */
#define MAX_MS CLK_TO_MS(MAX_CLK)
static const unsigned int led_n_base[ASIC3_NUM_LEDS] = {
[0] = ASIC3_LED_0_Base,
[1] = ASIC3_LED_1_Base,
[2] = ASIC3_LED_2_Base,
};
static void brightness_set(struct led_classdev *cdev,
enum led_brightness value)
{
struct platform_device *pdev = to_platform_device(cdev->dev->parent);
const struct mfd_cell *cell = mfd_get_cell(pdev);
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
u32 timebase;
unsigned int base;
timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4);
base = led_n_base[cell->id];
asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32);
asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32);
asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase);
}
static int blink_set(struct led_classdev *cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct platform_device *pdev = to_platform_device(cdev->dev->parent);
const struct mfd_cell *cell = mfd_get_cell(pdev);
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
u32 on;
u32 off;
unsigned int base;
if (*delay_on > MAX_MS || *delay_off > MAX_MS)
return -EINVAL;
if (*delay_on == 0 && *delay_off == 0) {
/* If both are zero then a sensible default should be chosen */
on = MS_TO_CLK(500);
off = MS_TO_CLK(500);
} else {
on = MS_TO_CLK(*delay_on);
off = MS_TO_CLK(*delay_off);
if ((on + off) > MAX_CLK)
return -EINVAL;
}
base = led_n_base[cell->id];
asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off));
asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on);
asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4));
*delay_on = CLK_TO_MS(on);
*delay_off = CLK_TO_MS(off);
return 0;
}
static int __devinit asic3_led_probe(struct platform_device *pdev)
{
struct asic3_led *led = pdev->dev.platform_data;
int ret;
ret = mfd_cell_enable(pdev);
if (ret < 0)
goto ret0;
led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL);
if (!led->cdev) {
ret = -ENOMEM;
goto ret1;
}
led->cdev->name = led->name;
led->cdev->default_trigger = led->default_trigger;
led->cdev->brightness_set = brightness_set;
led->cdev->blink_set = blink_set;
ret = led_classdev_register(&pdev->dev, led->cdev);
if (ret < 0)
goto ret2;
return 0;
ret2:
kfree(led->cdev);
ret1:
(void) mfd_cell_disable(pdev);
ret0:
return ret;
}
static int __devexit asic3_led_remove(struct platform_device *pdev)
{
struct asic3_led *led = pdev->dev.platform_data;
led_classdev_unregister(led->cdev);
kfree(led->cdev);
return mfd_cell_disable(pdev);
}
static struct platform_driver asic3_led_driver = {
.probe = asic3_led_probe,
.remove = __devexit_p(asic3_led_remove),
.driver = {
.name = "leds-asic3",
.owner = THIS_MODULE,
},
};
MODULE_ALIAS("platform:leds-asic3");
static int __init asic3_led_init(void)
{
return platform_driver_register(&asic3_led_driver);
}
static void __exit asic3_led_exit(void)
{
platform_driver_unregister(&asic3_led_driver);
}
module_init(asic3_led_init);
module_exit(asic3_led_exit);
MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
MODULE_DESCRIPTION("HTC ASIC3 LED driver");
MODULE_LICENSE("GPL");
......@@ -16,6 +16,13 @@
#include <linux/types.h>
struct led_classdev;
struct asic3_led {
const char *name;
const char *default_trigger;
struct led_classdev *cdev;
};
struct asic3_platform_data {
u16 *gpio_config;
unsigned int gpio_config_num;
......@@ -23,6 +30,8 @@ struct asic3_platform_data {
unsigned int irq_base;
unsigned int gpio_base;
struct asic3_led *leds;
};
#define ASIC3_NUM_GPIO_BANKS 4
......@@ -111,9 +120,9 @@ struct asic3_platform_data {
#define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0)
#define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0)
#define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0)
#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 1, 0)
#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 1, 0)
#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 1, 0)
#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 0, 0)
#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 0, 0)
#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 0, 0)
#define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0)
#define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0)
#define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0)
......@@ -152,6 +161,7 @@ struct asic3_platform_data {
#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */
#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */
#define ASIC3_NUM_LEDS 3
#define ASIC3_LED_0_Base 0x0700
#define ASIC3_LED_1_Base 0x0800
#define ASIC3_LED_2_Base 0x0900
......@@ -293,4 +303,10 @@ struct asic3_platform_data {
#define ASIC3_MAP_SIZE_32BIT 0x2000
#define ASIC3_MAP_SIZE_16BIT 0x1000
/* Functions needed by leds-asic3 */
struct asic3;
extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val);
extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg);
#endif /* __ASIC3_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment