Commit 7db5e3cb authored by Jens Taprogge's avatar Jens Taprogge Committed by Greg Kroah-Hartman

Staging: ipack: Move device ids from ipoctal.c to ipack_ids.h.

Rename them in the process.
Signed-off-by: default avatarJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: default avatarSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent e8ed3276
......@@ -25,11 +25,6 @@
#include "ipoctal.h"
#include "scc2698.h"
#define IP_OCTAL_MANUFACTURER_ID 0xF0
#define IP_OCTAL_232_ID 0x22
#define IP_OCTAL_422_ID 0x2A
#define IP_OCTAL_485_ID 0x48
#define IP_OCTAL_ID_SPACE_VECTOR 0x41
#define IP_OCTAL_NB_BLOCKS 4
......@@ -231,7 +226,7 @@ static int ipoctal_irq_handler(void *arg)
/* In case of RS-485, change from TX to RX when finishing TX.
* Half-duplex.
*/
if ((ipoctal->board_id == IP_OCTAL_485_ID) &&
if ((ipoctal->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
(sr & SR_TX_EMPTY) &&
(ipoctal->nb_bytes[channel] == 0)) {
ipoctal_write_io_reg(ipoctal,
......@@ -304,7 +299,7 @@ static int ipoctal_irq_handler(void *arg)
if ((ipoctal->nb_bytes[channel] == 0) &&
(waitqueue_active(&ipoctal->queue[channel]))) {
if (ipoctal->board_id != IP_OCTAL_485_ID) {
if (ipoctal->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
ipoctal->write = 1;
wake_up_interruptible(&ipoctal->queue[channel]);
}
......@@ -322,15 +317,16 @@ static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id)
unsigned char manufacturerID;
unsigned char board_id;
manufacturerID = ioread8(dev->id_space.address + IPACK_IDPROM_OFFSET_MANUFACTURER_ID);
if (manufacturerID != IP_OCTAL_MANUFACTURER_ID)
if (manufacturerID != IPACK1_VENDOR_ID_SBS)
return -ENODEV;
board_id = ioread8(dev->id_space.address + IPACK_IDPROM_OFFSET_MODEL);
switch (board_id) {
case IP_OCTAL_232_ID:
case IP_OCTAL_422_ID:
case IP_OCTAL_485_ID:
case IPACK1_DEVICE_ID_SBS_OCTAL_232:
case IPACK1_DEVICE_ID_SBS_OCTAL_422:
case IPACK1_DEVICE_ID_SBS_OCTAL_485:
*id = board_id;
break;
default:
......@@ -543,7 +539,7 @@ static int ipoctal_write(struct ipoctal *ipoctal, unsigned int channel,
ipoctal_copy_write_buffer(ipoctal, channel, buf, count);
/* As the IP-OCTAL 485 only supports half duplex, do it manually */
if (ipoctal->board_id == IP_OCTAL_485_ID) {
if (ipoctal->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
ipoctal_write_io_reg(ipoctal,
&ipoctal->chan_regs[channel].w.cr,
CR_DISABLE_RX);
......@@ -654,7 +650,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
/* Set the flow control */
switch (ipoctal->board_id) {
case IP_OCTAL_232_ID:
case IPACK1_DEVICE_ID_SBS_OCTAL_232:
if (cflag & CRTSCTS) {
mr1 |= MR1_RxRTS_CONTROL_ON;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
......@@ -663,11 +659,11 @@ static void ipoctal_set_termios(struct tty_struct *tty,
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
}
break;
case IP_OCTAL_422_ID:
case IPACK1_DEVICE_ID_SBS_OCTAL_422:
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
break;
case IP_OCTAL_485_ID:
case IPACK1_DEVICE_ID_SBS_OCTAL_485:
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
break;
......
......@@ -25,3 +25,8 @@
#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D
#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E
#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F
#define IPACK1_VENDOR_ID_SBS 0xF0
#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22
#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A
#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment