drivers: clk: st: Remove stih415-416 clock support

STiH415 and STiH416 platforms are no longer used.
these platforms will be deprecated for the next kernel.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt

-Binding for a ST divider and multiplexer clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,clkgena-divmux-c65-hs",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c65-ls",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf0",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf1",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf2",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf3",	"st,clkgena-divmux"
-
-- #clock-cells : From common clock binding; shall be set to 1.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
-	clockgen-a@fd345000 {
-		reg = <0xfd345000 0xb50>;
-
-		clk_m_a1_div1: clk-m-a1-div1 {
-			#clock-cells = <1>;
-			compatible = "st,clkgena-divmux-c32-odf1",
-				     "st,clkgena-divmux";
-
-			clocks = <&clk_m_a1_osc_prediv>,
-				 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-				 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-			clock-output-names = "clk-m-rx-icn-ts",
-					     "clk-m-rx-icn-vdp-0",
-					     "", /* unused */
-					     "clk-m-prv-t1-bus",
-					     "clk-m-icn-reg-12",
-					     "clk-m-icn-reg-10",
-					     "", /* unused */
-					     "clk-m-icn-st231";
-		};
-	};
-

Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt

@@ -10,13 +10,6 @@ This binding uses the common clock binding[1].
 Required properties:
 
 - compatible : shall be:
-	"st,stih416-clkgenc-vcc-hd",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-fvdp",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-hva", 	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-hd",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
-	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
-	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
@@ -27,10 +20,13 @@ Required properties:
 
 Example:
 
-	clk_m_hva: clk-m-hva@fd690868 {
+	clk_m_a9: clk-m-a9@92b0000 {
 		#clock-cells = <0>;
-		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
-		reg = <0xfd690868 4>;
+		compatible = "st,stih407-clkgen-a9-mux";
+		reg = <0x92b0000 0x10000>;
 
-		clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
+		clocks = <&clockgen_a9_pll 0>,
+			 <&clockgen_a9_pll 0>,
+			 <&clk_s_c0_flexgen 13>,
+			 <&clk_m_a9_ext2f_div2>;
 	};

Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt

@@ -9,25 +9,12 @@ Base address is located to the parent node. See clock binding[2]
 Required properties:
 
 - compatible : shall be:
-	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
-	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
-
-	"st,clkgena-plls-c65"
-	"st,plls-c32-a1x-0",		"st,clkgen-plls-c32"
-	"st,plls-c32-a1x-1",		"st,clkgen-plls-c32"
-	"st,stih415-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
-	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
 	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
 	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
 	"st,stih418-plls-c28-a9",	"st,clkgen-plls-c32"
 
-	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
-	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
@@ -36,17 +23,16 @@ Required properties:
 
 Example:
 
-	clockgen-a@fee62000 {
-		reg = <0xfee62000 0xb48>;
+	clockgen-a9@92b0000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x92b0000 0xffff>;
 
-		clk_s_a0_pll: clk-s-a0-pll {
+		clockgen_a9_pll: clockgen-a9-pll {
 			#clock-cells = <1>;
-			compatible = "st,clkgena-plls-c65";
+			compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
 
 			clocks = <&clk_sysin>;
 
-			clock-output-names = "clk-s-a0-pll0-hs",
-					     "clk-s-a0-pll0-ls",
-					     "clk-s-a0-pll1";
+			clock-output-names = "clockgen-a9-pll-odf";
 		};
 	};

Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt

-Binding for a ST pre-divider clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
-	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
-
-- #clock-cells : From common clock binding; shall be set to 0.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
-	clockgen-a@fd345000 {
-		reg = <0xfd345000 0xb50>;
-
-		clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-			#clock-cells = <0>;
-			compatible = "st,clkgena-prediv-c32",
-				     "st,clkgena-prediv";
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-m-a2-osc-prediv";
-		};
-	};
-

Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt

-Binding for a type of STMicroelectronics clock crossbar (VCC).
-
-The crossbar can take up to 4 input clocks and control up to 16
-output clocks. Not all inputs or outputs have to be in use in a
-particular instantiation. Each output can be individually enabled,
-select any of the input clocks and apply a divide (by 1,2,4 or 8) to
-that selected clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,stih416-clkgenc",		"st,vcc"
-	"st,stih416-clkgenf",		"st,vcc"
-
-- #clock-cells : from common clock binding; shall be set to 1.
-
-- reg : A Base address and length of the register set.
-
-- clocks : from common clock binding
-
-- clock-output-names : From common clock binding. The block has 16
-                       clock outputs but not all of them in a specific instance
-                       have to be used in the SoC. If a clock name is left as
-                       an empty string then no clock will be created for the
-                       output associated with that string index. If fewer than
-                       16 strings are provided then no clocks will be created
-                       for the remaining outputs.
-
-Example:
-
-	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
-		#clock-cells = <1>;
-		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
-		reg = <0xfe8308ac 12>;
-
-		clocks = <&clk_s_vcc_hd>,
-			 <&clockgen_c 1>,
-			 <&clk_s_tmds_fromphy>,
-			 <&clockgen_c 2>;
-
-		clock-output-names  = "clk-s-pix-hdmi",
-				      "clk-s-pix-dvo",
-				      "clk-s-out-dvo",
-				      "clk-s-pix-hd",
-				      "clk-s-hddac",
-				      "clk-s-denc",
-				      "clk-s-sddac",
-				      "clk-s-pix-main",
-				      "clk-s-pix-aux",
-				      "clk-s-stfe-frc-0",
-				      "clk-s-ref-mcru",
-				      "clk-s-slave-mcru",
-				      "clk-s-tmds-hdmi",
-				      "clk-s-hdmi-reject-pll",
-				      "clk-s-thsens";
-	};
-

Documentation/devicetree/bindings/clock/st/st,clkgen.txt

@@ -13,14 +13,6 @@ address is common of all subnode.
 			...
 		};
 
-		prediv_node {
-			...
-		};
-
-		divmux_node {
-			...
-		};
-
 		quadfs_node {
 			...
 		};
@@ -29,10 +21,6 @@ address is common of all subnode.
 			...
 		};
 
-		vcc_node {
-			...
-		};
-
 		flexgen_node {
 			...
 		};
@@ -43,11 +31,8 @@ This binding uses the common clock binding[1].
 Each subnode should use the binding described in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
 [3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
 [4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
-[6] Documentation/devicetree/bindings/clock/st,vcc.txt
 [7] Documentation/devicetree/bindings/clock/st,quadfs.txt
 [8] Documentation/devicetree/bindings/clock/st,flexgen.txt
 
@@ -57,44 +42,27 @@ Required properties:
 
 Example:
 
-	clockgen-a@fee62000 {
-
-		reg = <0xfee62000 0xb48>;
+	clockgen-a@090ff000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x90ff000 0x1000>;
 
 		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
-			compatible = "st,clkgena-plls-c65";
-
-			clocks = <&clk-sysin>;
-
-			clock-output-names = "clk-s-a0-pll0-hs",
-					     "clk-s-a0-pll0-ls",
-					     "clk-s-a0-pll1";
-		};
-
-		clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-			#clock-cells = <0>;
-			compatible = "st,clkgena-prediv-c65",
-				     "st,clkgena-prediv";
+			compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
 
 			clocks = <&clk_sysin>;
 
-			clock-output-names = "clk-s-a0-osc-prediv";
+			clock-output-names = "clk-s-a0-pll-ofd-0";
 		};
 
-		clk_s_a0_hs: clk-s-a0-hs {
+		clk_s_a0_flexgen: clk-s-a0-flexgen {
+			compatible = "st,flexgen";
+
 			#clock-cells = <1>;
-			compatible = "st,clkgena-divmux-c65-hs",
-				     "st,clkgena-divmux";
 
-			clocks = <&clk-s_a0_osc_prediv>,
-				 <&clk-s_a0_pll 0>, /* pll0 hs */
-				 <&clk-s_a0_pll 2>; /* pll1 */
+			clocks = <&clk_s_a0_pll 0>,
+				 <&clk_sysin>;
 
-			clock-output-names = "clk-s-fdma-0",
-					     "clk-s-fdma-1",
-					     ""; /* clk-s-jit-sense */
-					     /* fourth output unused */
+			clock-output-names = "clk-ic-lmi0";
 		};
 	};
-

Documentation/devicetree/bindings/clock/st/st,quadfs.txt

@@ -11,10 +11,6 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be:
-  "st,stih416-quadfs216",	"st,quadfs"
-  "st,stih416-quadfs432",	"st,quadfs"
-  "st,stih416-quadfs660-E",	"st,quadfs"
-  "st,stih416-quadfs660-F",	"st,quadfs"
   "st,stih407-quadfs660-C",	"st,quadfs"
   "st,stih407-quadfs660-D",	"st,quadfs"
 
@@ -35,14 +31,15 @@ Required properties:
 
 Example:
 
-	clockgen_e: clockgen-e@fd3208bc {
-                #clock-cells = <1>;
-                compatible = "st,stih416-quadfs660-E", "st,quadfs";
-                reg = <0xfd3208bc 0xB0>;
-
-                clocks = <&clk_sysin>;
-                clock-output-names = "clk-m-pix-mdtp-0",
-				     "clk-m-pix-mdtp-1",
-				     "clk-m-pix-mdtp-2",
-				     "clk-m-mpelpc";
-        };
+	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+		#clock-cells = <1>;
+		compatible = "st,stih407-quadfs660-C", "st,quadfs";
+		reg = <0x9103000 0x1000>;
+
+		clocks = <&clk_sysin>;
+
+		clock-output-names = "clk-s-c0-fs0-ch0",
+				     "clk-s-c0-fs0-ch1",
+				     "clk-s-c0-fs0-ch2",
+				     "clk-s-c0-fs0-ch3";
+	};