Commit 7df5659e authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Benjamin Herrenschmidt

serial/8250: Move UPIO_TSI to powerpc

This iotype is only used by the legacy_serial code in powerpc, so the
code should live there, rather than be compiled in for every 8250
driver.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-serial@vger.kernel.org
Acked-by: default avatarDavid Daney <david.daney@cavium.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 2eccacd0
......@@ -6,6 +6,7 @@
#include <linux/pci.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/serial_reg.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/prom.h>
......@@ -47,6 +48,24 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
static unsigned int legacy_serial_count;
static int legacy_serial_console = -1;
static unsigned int tsi_serial_in(struct uart_port *p, int offset)
{
unsigned int tmp;
offset = offset << p->regshift;
if (offset == UART_IIR) {
tmp = readl(p->membase + (UART_IIR & ~3));
return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
} else
return readb(p->membase + offset);
}
static void tsi_serial_out(struct uart_port *p, int offset, int value)
{
offset = offset << p->regshift;
if (!((offset == UART_IER) && (value & UART_IER_UUE)))
writeb(value, p->membase + offset);
}
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq,
......@@ -102,6 +121,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
legacy_serial_ports[index].iobase = base;
else
legacy_serial_ports[index].mapbase = base;
legacy_serial_ports[index].iotype = iotype;
legacy_serial_ports[index].uartclk = clock;
legacy_serial_ports[index].irq = irq;
......@@ -112,6 +132,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
legacy_serial_infos[index].irq_check_parent = irq_check_parent;
if (iotype == UPIO_TSI) {
legacy_serial_ports[index].serial_in = tsi_serial_in;
legacy_serial_ports[index].serial_out = tsi_serial_out;
}
printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
index, np->full_name);
printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
......
......@@ -443,24 +443,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
__raw_writel(value, p->membase + offset);
}
static unsigned int tsi_serial_in(struct uart_port *p, int offset)
{
unsigned int tmp;
offset = map_8250_in_reg(p, offset) << p->regshift;
if (offset == UART_IIR) {
tmp = readl(p->membase + (UART_IIR & ~3));
return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
} else
return readb(p->membase + offset);
}
static void tsi_serial_out(struct uart_port *p, int offset, int value)
{
offset = map_8250_out_reg(p, offset) << p->regshift;
if (!((offset == UART_IER) && (value & UART_IER_UUE)))
writeb(value, p->membase + offset);
}
/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
static inline void dwapb_save_out_value(struct uart_port *p, int offset,
int value)
......@@ -535,11 +517,6 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = au_serial_out;
break;
case UPIO_TSI:
p->serial_in = tsi_serial_in;
p->serial_out = tsi_serial_out;
break;
case UPIO_DWAPB:
p->serial_in = mem_serial_in;
p->serial_out = dwapb_serial_out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment