Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - new driver for HTU21D (humidity sensor)
 - add support for Fam16h (Kabini) to k10temp
 - add support for NCT6102D/6106D and NCT6791D to nct6775 driver
 - add support for ADS1115 to ads1015 driver
 - add support for hibernate to w83627ehf and nct6775 drivers
 - some minor cleanups

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (htu21) Add Measurement Specialties HTU21D support
  hwmon: Change my email address.
  hwmon: (k10temp) Add support for Fam16h (Kabini)
  hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0
  hwmon: (ads1015) Add support for ADS1115
  hwmon: (w83627ehf) Add support for hibernate
  hwmon: (nct6775) Add support for hibernate
  hwmon: use dev_get_platdata()
  hwmon: (nct6775) Fix size of data->temp array
  hwmon: (nct6775) Avoid using device platform data outside probe function
  hwmon: (nct6775) Add support for NCT6791D
  hwmon: (nct6775) Add support for beep attributes
  hwmon: (nct6775) Add support for critical low/high temperature limits on NCT6106
  hwmon: (nct6775) Add support for NCT6102D/6106D
  hwmon: (nct6775) Support two SuperIO chips in the same system
  hwmon: (nct6775) Allocate attributes dynamically from templates
  hwmon: (coretemp) Atom CPUs don't support TjMax; no warning needed

Documentation/hwmon/ads1015

@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'ads1015'
     Datasheet: Publicly available at the Texas Instruments website :
                http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+  * Texas Instruments ADS1115
+    Prefix: 'ads1115'
+    Datasheet: Publicly available at the Texas Instruments website :
+               http://focus.ti.com/lit/ds/symlink/ads1115.pdf
 
 Authors:
         Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
@@ -13,9 +17,9 @@ Authors:
 Description
 -----------
 
-This driver implements support for the Texas Instruments ADS1015.
+This driver implements support for the Texas Instruments ADS1015/ADS1115.
 
-This device is a 12-bit A-D converter with 4 inputs.
+This device is a 12/16-bit A-D converter with 4 inputs.
 
 The inputs can be used single ended or in certain differential combinations.
 

Documentation/hwmon/htu21

+Kernel driver htu21
+===================
+
+Supported chips:
+  * Measurement Specialties HTU21D
+    Prefix: 'htu21'
+    Addresses scanned: none
+    Datasheet: Publicly available at the Measurement Specialties website
+    http://www.meas-spec.com/downloads/HTU21D.pdf
+
+
+Author:
+  William Markezana <william.markezana@meas-spec.com>
+
+Description
+-----------
+
+The HTU21D is a humidity and temperature sensor in a DFN package of
+only 3 x 3 mm footprint and 0.9 mm height.
+
+The devices communicate with the I2C protocol. All sensors are set to the
+same I2C address 0x40, so an entry with I2C_BOARD_INFO("htu21", 0x40) can
+be used in the board setup code.
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices
+for details.
+
+sysfs-Interface
+---------------
+
+temp1_input - temperature input
+humidity1_input - humidity input
+
+Notes
+-----
+
+The driver uses the default resolution settings of 12 bit for humidity and 14
+bit for temperature, which results in typical measurement times of 11 ms for
+humidity and 44 ms for temperature. To keep self heating below 0.1 degree
+Celsius, the device should not be active for more than 10% of the time. For
+this reason, the driver performs no more than two measurements per second and
+reports cached information if polled more frequently.
+
+Different resolutions, the on-chip heater, using the CRC checksum and reading
+the serial number are not supported yet.

Documentation/hwmon/k10temp

@@ -12,6 +12,7 @@ Supported chips:
 * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 * AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
+* AMD Family 16h processors: "Kabini"
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space

drivers/hwmon/Kconfig

@@ -296,8 +296,8 @@ config SENSORS_K10TEMP
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
 	  the AMD Family 10h and all revisions of the AMD Family 11h,
-	  12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
-	  microarchitectures.
+	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
+	  16h (Kabini) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
@@ -511,6 +511,16 @@ config SENSORS_HIH6130
 	  This driver can also be built as a module.  If so, the module
 	  will be called hih6130.
 
+config SENSORS_HTU21
+	tristate "Measurement Specialties HTU21D humidity/temperature sensors"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Measurement Specialties
+	  HTU21D humidity and temperature sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called htu21.
+
 config SENSORS_CORETEMP
 	tristate "Intel Core/Core2/Atom temperature sensor"
 	depends on X86
@@ -1202,8 +1212,8 @@ config SENSORS_ADS1015
 	tristate "Texas Instruments ADS1015"
 	depends on I2C
 	help
-	  If you say yes here you get support for Texas Instruments ADS1015
-	  12-bit 4-input ADC device.
+	  If you say yes here you get support for Texas Instruments
+	  ADS1015/ADS1115 12/16-bit 4-input ADC device.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ads1015.

drivers/hwmon/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
 obj-$(CONFIG_SENSORS_GPIO_FAN)	+= gpio-fan.o
 obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
+obj-$(CONFIG_SENSORS_HTU21)	+= htu21.o
 obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
 obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
 obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o

drivers/hwmon/acpi_power_meter.c

@@ -2,7 +2,7 @@
  * A hwmon driver for ACPI 4.0 power meters
  * Copyright (C) 2009 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1001,7 +1001,7 @@ static void __exit acpi_power_meter_exit(void)
 	acpi_bus_unregister_driver(&acpi_power_meter_driver);
 }
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("ACPI 4.0 power meter driver");
 MODULE_LICENSE("GPL");
 

drivers/hwmon/ads1015.c

@@ -46,17 +46,28 @@ static const unsigned int fullscale_table[8] = {
 	6144, 4096, 2048, 1024, 512, 256, 256, 256 };
 
 /* Data rates in samples per second */
-static const unsigned int data_rate_table[8] = {
-	128, 250, 490, 920, 1600, 2400, 3300, 3300 };
+static const unsigned int data_rate_table_1015[8] = {
+	128, 250, 490, 920, 1600, 2400, 3300, 3300
+};
+
+static const unsigned int data_rate_table_1115[8] = {
+	8, 16, 32, 64, 128, 250, 475, 860
+};
 
 #define ADS1015_DEFAULT_CHANNELS 0xff
 #define ADS1015_DEFAULT_PGA 2
 #define ADS1015_DEFAULT_DATA_RATE 4
 
+enum ads1015_chips {
+	ads1015,
+	ads1115,
+};
+
 struct ads1015_data {
 	struct device *hwmon_dev;
 	struct mutex update_lock; /* mutex protect updates */
 	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
+	enum ads1015_chips id;
 };
 
 static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
@@ -66,6 +77,8 @@ static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
 	unsigned int pga = data->channel_data[channel].pga;
 	unsigned int data_rate = data->channel_data[channel].data_rate;
 	unsigned int conversion_time_ms;
+	const unsigned int * const rate_table = data->id == ads1115 ?
+		data_rate_table_1115 : data_rate_table_1015;
 	int res;
 
 	mutex_lock(&data->update_lock);
@@ -75,7 +88,7 @@ static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
 	if (res < 0)
 		goto err_unlock;
 	config = res;
-	conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]);
+	conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]);
 
 	/* setup and start single conversion */
 	config &= 0x001f;
@@ -113,8 +126,9 @@ static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
 	struct ads1015_data *data = i2c_get_clientdata(client);
 	unsigned int pga = data->channel_data[channel].pga;
 	int fullscale = fullscale_table[pga];
+	const unsigned mask = data->id == ads1115 ? 0x7fff : 0x7ff0;
 
-	return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0);
+	return DIV_ROUND_CLOSEST(reg * fullscale, mask);
 }
 
 /* sysfs callback function */
@@ -257,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client,
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-
+	data->id = id->driver_data;
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
@@ -286,7 +300,8 @@ static int ads1015_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id ads1015_id[] = {
-	{ "ads1015", 0 },
+	{ "ads1015",  ads1015},
+	{ "ads1115",  ads1115},
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ads1015_id);

drivers/hwmon/ads7828.c

@@ -145,7 +145,7 @@ static int ads7828_remove(struct i2c_client *client)
 static int ads7828_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	struct ads7828_platform_data *pdata = client->dev.platform_data;
+	struct ads7828_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct ads7828_data *data;
 	int err;
 

drivers/hwmon/adt7462.c

@@ -2,7 +2,7 @@
  * A hwmon driver for the Analog Devices ADT7462
  * Copyright (C) 2008 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -333,7 +333,7 @@ static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which)
 			return 0x4C;
 		break;
 	}
-	return -ENODEV;
+	return 0;
 }
 
 static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which)
@@ -392,7 +392,7 @@ static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which)
 			return 0x77;
 		break;
 	}
-	return -ENODEV;
+	return 0;
 }
 
 static int ADT7462_REG_VOLT(struct adt7462_data *data, int which)
@@ -1970,6 +1970,6 @@ static int adt7462_remove(struct i2c_client *client)
 
 module_i2c_driver(adt7462_driver);
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("ADT7462 driver");
 MODULE_LICENSE("GPL");

drivers/hwmon/adt7470.c

@@ -2,7 +2,7 @@
  * A hwmon driver for the Analog Devices ADT7470
  * Copyright (C) 2007 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1314,6 +1314,6 @@ static int adt7470_remove(struct i2c_client *client)
 
 module_i2c_driver(adt7470_driver);
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("ADT7470 driver");
 MODULE_LICENSE("GPL");

drivers/hwmon/coretemp.c

@@ -316,6 +316,18 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 	return tjmax;
 }
 
+static bool cpu_has_tjmax(struct cpuinfo_x86 *c)
+{
+	u8 model = c->x86_model;
+
+	return model > 0xe &&
+	       model != 0x1c &&
+	       model != 0x26 &&
+	       model != 0x27 &&
+	       model != 0x35 &&
+	       model != 0x36;
+}
+
 static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 {
 	int err;
@@ -328,7 +340,7 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 	 */
 	err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
 	if (err) {
-		if (c->x86_model > 0xe && c->x86_model != 0x1c)
+		if (cpu_has_tjmax(c))
 			dev_warn(dev, "Unable to read TjMax from CPU %u\n", id);
 	} else {
 		val = (eax >> 16) & 0xff;

drivers/hwmon/ds620.c

@@ -77,7 +77,7 @@ struct ds620_data {
 
 static void ds620_init_client(struct i2c_client *client)
 {
-	struct ds620_platform_data *ds620_info = client->dev.platform_data;
+	struct ds620_platform_data *ds620_info = dev_get_platdata(&client->dev);
 	u16 conf, new_conf;
 
 	new_conf = conf =

drivers/hwmon/f71805f.c

@@ -1375,7 +1375,7 @@ static void f71805f_init_device(struct f71805f_data *data)
 
 static int f71805f_probe(struct platform_device *pdev)
 {
-	struct f71805f_sio_data *sio_data = pdev->dev.platform_data;
+	struct f71805f_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	struct f71805f_data *data;
 	struct resource *res;
 	int i, err;

drivers/hwmon/f71882fg.c

@@ -2267,7 +2267,7 @@ static int f71882fg_create_fan_sysfs_files(
 static int f71882fg_probe(struct platform_device *pdev)
 {
 	struct f71882fg_data *data;
-	struct f71882fg_sio_data *sio_data = pdev->dev.platform_data;
+	struct f71882fg_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int nr_fans = f71882fg_nr_fans[sio_data->type];
 	int nr_temps = f71882fg_nr_temps[sio_data->type];
 	int err, i;

drivers/hwmon/f75375s.c

@@ -832,7 +832,8 @@ static int f75375_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
 	struct f75375_data *data;
-	struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
+	struct f75375s_platform_data *f75375s_pdata =
+			dev_get_platdata(&client->dev);
 	int err;
 
 	if (!i2c_check_functionality(client->adapter,

drivers/hwmon/g762.c

@@ -717,7 +717,7 @@ static void g762_of_clock_disable(struct i2c_client *client) { }
 
 static int g762_pdata_prop_import(struct i2c_client *client)
 {
-	struct g762_platform_data *pdata = client->dev.platform_data;
+	struct g762_platform_data *pdata = dev_get_platdata(&client->dev);
 	int ret;
 
 	if (!pdata)

drivers/hwmon/gpio-fan.c

@@ -495,7 +495,7 @@ static int gpio_fan_probe(struct platform_device *pdev)
 {
 	int err;
 	struct gpio_fan_data *fan_data;
-	struct gpio_fan_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_fan_platform_data *pdata = dev_get_platdata(&pdev->dev);
 
 #ifdef CONFIG_OF_GPIO
 	if (!pdata) {

drivers/hwmon/htu21.c

+/*
+ * Measurement Specialties HTU21D humidity and temperature sensor driver
+ *
+ * Copyright (C) 2013 William Markezana <william.markezana@meas-spec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+
+/* HTU21 Commands */
+#define HTU21_T_MEASUREMENT_HM	0xE3
+#define HTU21_RH_MEASUREMENT_HM	0xE5
+
+struct htu21 {
+	struct device *hwmon_dev;
+	struct mutex lock;
+	bool valid;
+	unsigned long last_update;
+	int temperature;
+	int humidity;
+};
+
+static inline int htu21_temp_ticks_to_millicelsius(int ticks)
+{
+	ticks &= ~0x0003; /* clear status bits */
+	/*
+	 * Formula T = -46.85 + 175.72 * ST / 2^16 from datasheet p14,
+	 * optimized for integer fixed point (3 digits) arithmetic
+	 */
+	return ((21965 * ticks) >> 13) - 46850;
+}
+
+static inline int htu21_rh_ticks_to_per_cent_mille(int ticks)
+{
+	ticks &= ~0x0003; /* clear status bits */
+	/*
+	 * Formula RH = -6 + 125 * SRH / 2^16 from datasheet p14,
+	 * optimized for integer fixed point (3 digits) arithmetic
+	 */
+	return ((15625 * ticks) >> 13) - 6000;
+}
+
+static int htu21_update_measurements(struct i2c_client *client)
+{
+	int ret = 0;
+	struct htu21 *htu21 = i2c_get_clientdata(client);
+
+	mutex_lock(&htu21->lock);
+
+	if (time_after(jiffies, htu21->last_update + HZ / 2) ||
+	    !htu21->valid) {
+		ret = i2c_smbus_read_word_swapped(client,
+						  HTU21_T_MEASUREMENT_HM);
+		if (ret < 0)
+			goto out;
+		htu21->temperature = htu21_temp_ticks_to_millicelsius(ret);
+		ret = i2c_smbus_read_word_swapped(client,
+						  HTU21_RH_MEASUREMENT_HM);
+		if (ret < 0)
+			goto out;
+		htu21->humidity = htu21_rh_ticks_to_per_cent_mille(ret);
+		htu21->last_update = jiffies;
+		htu21->valid = true;
+	}
+out:
+	mutex_unlock(&htu21->lock);
+
+	return ret >= 0 ? 0 : ret;
+}
+
+static ssize_t htu21_show_temperature(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct htu21 *htu21 = i2c_get_clientdata(client);
+	int ret = htu21_update_measurements(client);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", htu21->temperature);
+}
+
+static ssize_t htu21_show_humidity(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct htu21 *htu21 = i2c_get_clientdata(client);
+	int ret = htu21_update_measurements(client);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", htu21->humidity);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+			  htu21_show_temperature, NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO,
+			  htu21_show_humidity, NULL, 0);
+
+static struct attribute *htu21_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_humidity1_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group htu21_group = {
+	.attrs = htu21_attributes,
+};
+
+static int htu21_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct htu21 *htu21;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		dev_err(&client->dev,
+			"adapter does not support SMBus word transactions\n");
+		return -ENODEV;
+	}
+
+	htu21 = devm_kzalloc(&client->dev, sizeof(*htu21), GFP_KERNEL);
+	if (!htu21)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, htu21);
+
+	mutex_init(&htu21->lock);
+
+	err = sysfs_create_group(&client->dev.kobj, &htu21_group);
+	if (err) {
+		dev_dbg(&client->dev, "could not create sysfs files\n");
+		return err;
+	}
+	htu21->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(htu21->hwmon_dev)) {
+		dev_dbg(&client->dev, "unable to register hwmon device\n");
+		err = PTR_ERR(htu21->hwmon_dev);
+		goto error;
+	}
+
+	dev_info(&client->dev, "initialized\n");
+
+	return 0;
+
+error:
+	sysfs_remove_group(&client->dev.kobj, &htu21_group);
+	return err;
+}
+
+static int htu21_remove(struct i2c_client *client)
+{
+	struct htu21 *htu21 = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(htu21->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &htu21_group);
+
+	return 0;
+}
+
+static const struct i2c_device_id htu21_id[] = {
+	{ "htu21", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, htu21_id);
+
+static struct i2c_driver htu21_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "htu21",
+	},
+	.probe       = htu21_probe,
+	.remove      = htu21_remove,
+	.id_table    = htu21_id,
+};
+
+module_i2c_driver(htu21_driver);
+
+MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>");
+MODULE_DESCRIPTION("MEAS HTU21D humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/i5k_amb.c

@@ -3,7 +3,7 @@
  * temperature sensors
  * Copyright (C) 2007 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -609,7 +609,7 @@ static void __exit i5k_amb_exit(void)
 	platform_driver_unregister(&i5k_amb_driver);
 }
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("Intel 5000 chipset FB-DIMM AMB temperature sensor");
 MODULE_LICENSE("GPL");
 

drivers/hwmon/ibmaem.c

@@ -3,7 +3,7 @@
  * temperature/power/energy sensors and capping functionality.
  * Copyright (C) 2008 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1103,7 +1103,7 @@ static void __exit aem_exit(void)
 		aem_delete(p1);
 }
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
 MODULE_LICENSE("GPL");
 

drivers/hwmon/ibmpex.c

@@ -2,7 +2,7 @@
  * A hwmon driver for the IBM PowerExecutive temperature/power sensors
  * Copyright (C) 2007 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -606,7 +606,7 @@ static void __exit ibmpex_exit(void)
 		ibmpex_bmc_delete(p);
 }
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("IBM PowerExecutive power/temperature sensor driver");
 MODULE_LICENSE("GPL");
 

drivers/hwmon/ina2xx.c

@@ -232,9 +232,9 @@ static int ina2xx_probe(struct i2c_client *client,
 	if (!data)
 		return -ENOMEM;
 
-	if (client->dev.platform_data) {
+	if (dev_get_platdata(&client->dev)) {
 		pdata =
-		  (struct ina2xx_platform_data *)client->dev.platform_data;
+		  (struct ina2xx_platform_data *)dev_get_platdata(&client->dev);
 		shunt = pdata->shunt_uohms;
 	} else if (!of_property_read_u32(client->dev.of_node,
 				"shunt-resistor", &val)) {

drivers/hwmon/it87.c

@@ -1962,7 +1962,7 @@ static int __init it87_find(unsigned short *address,
 static void it87_remove_files(struct device *dev)
 {
 	struct it87_data *data = platform_get_drvdata(pdev);
-	struct it87_sio_data *sio_data = dev->platform_data;
+	struct it87_sio_data *sio_data = dev_get_platdata(dev);
 	int i;
 
 	sysfs_remove_group(&dev->kobj, &it87_group);
@@ -2014,7 +2014,7 @@ static int it87_probe(struct platform_device *pdev)
 	struct it87_data *data;
 	struct resource *res;
 	struct device *dev = &pdev->dev;
-	struct it87_sio_data *sio_data = dev->platform_data;
+	struct it87_sio_data *sio_data = dev_get_platdata(dev);
 	int err = 0, i;
 	int enable_pwm_interface;
 	int fan_beep_need_rw;
@@ -2316,7 +2316,7 @@ static int it87_check_pwm(struct device *dev)
 /* Called when we have found a new IT87. */
 static void it87_init_device(struct platform_device *pdev)
 {
-	struct it87_sio_data *sio_data = pdev->dev.platform_data;
+	struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	struct it87_data *data = platform_get_drvdata(pdev);
 	int tmp, i;
 	u8 mask;

drivers/hwmon/k10temp.c

 /*
- * k10temp.c - AMD Family 10h/11h/12h/14h/15h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
  *
@@ -211,6 +211,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);

drivers/hwmon/lm87.c

@@ -855,8 +855,8 @@ static void lm87_init_client(struct i2c_client *client)
 {
 	struct lm87_data *data = i2c_get_clientdata(client);
 
-	if (client->dev.platform_data) {
-		data->channel = *(u8 *)client->dev.platform_data;
+	if (dev_get_platdata(&client->dev)) {
+		data->channel = *(u8 *)dev_get_platdata(&client->dev);
 		lm87_write_value(client,
 				 LM87_REG_CHANNEL_MODE, data->channel);
 	} else {

drivers/hwmon/max197.c

@@ -261,7 +261,7 @@ static int max197_probe(struct platform_device *pdev)
 {
 	int ch, ret;
 	struct max197_data *data;
-	struct max197_platform_data *pdata = pdev->dev.platform_data;
+	struct max197_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	enum max197_chips chip = platform_get_device_id(pdev)->driver_data;
 
 	if (pdata == NULL) {

drivers/hwmon/max6639.c

@@ -428,7 +428,7 @@ static int max6639_init_client(struct i2c_client *client)
 {
 	struct max6639_data *data = i2c_get_clientdata(client);
 	struct max6639_platform_data *max6639_info =
-		client->dev.platform_data;
+		dev_get_platdata(&client->dev);
 	int i;
 	int rpm_range = 1; /* default: 4000 RPM */
 	int err;

drivers/hwmon/mcp3021.c

@@ -143,12 +143,13 @@ static int mcp3021_probe(struct i2c_client *client,
 		break;
 	}
 
-	if (client->dev.platform_data) {
-		data->vdd = *(u32 *)client->dev.platform_data;
+	if (dev_get_platdata(&client->dev)) {
+		data->vdd = *(u32 *)dev_get_platdata(&client->dev);
 		if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
 			return -EINVAL;
-	} else
+	} else {
 		data->vdd = MCP3021_VDD_REF;
+	}
 
 	err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
 	if (err)

drivers/hwmon/ntc_thermistor.c

@@ -424,7 +424,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
 	if (IS_ERR(pdata))
 		return PTR_ERR(pdata);
 	else if (pdata == NULL)
-		pdata = pdev->dev.platform_data;
+		pdata = dev_get_platdata(&pdev->dev);
 
 	if (!pdata) {
 		dev_err(&pdev->dev, "No platform init data supplied.\n");

drivers/hwmon/pc87427.c

@@ -983,7 +983,7 @@ static int pc87427_request_regions(struct platform_device *pdev,
 
 static void pc87427_init_device(struct device *dev)
 {
-	struct pc87427_sio_data *sio_data = dev->platform_data;
+	struct pc87427_sio_data *sio_data = dev_get_platdata(dev);
 	struct pc87427_data *data = dev_get_drvdata(dev);
 	int i;
 	u8 reg;
@@ -1075,7 +1075,7 @@ static void pc87427_remove_files(struct device *dev)
 
 static int pc87427_probe(struct platform_device *pdev)
 {
-	struct pc87427_sio_data *sio_data = pdev->dev.platform_data;
+	struct pc87427_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	struct pc87427_data *data;
 	int i, err, res_count;
 

drivers/hwmon/pmbus/pmbus_core.c

@@ -1726,7 +1726,7 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
 		   struct pmbus_driver_info *info)
 {
 	struct device *dev = &client->dev;
-	const struct pmbus_platform_data *pdata = dev->platform_data;
+	const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
 	struct pmbus_data *data;
 	int ret;
 

drivers/hwmon/s3c-hwmon.c

@@ -165,7 +165,7 @@ static ssize_t s3c_hwmon_ch_show(struct device *dev,
 {
 	struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
 	struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev));
-	struct s3c_hwmon_pdata *pdata = dev->platform_data;
+	struct s3c_hwmon_pdata *pdata = dev_get_platdata(dev);
 	struct s3c_hwmon_chcfg *cfg;
 	int ret;
 
@@ -194,7 +194,7 @@ static ssize_t s3c_hwmon_label_show(struct device *dev,
 				    char *buf)
 {
 	struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
-	struct s3c_hwmon_pdata *pdata = dev->platform_data;
+	struct s3c_hwmon_pdata *pdata = dev_get_platdata(dev);
 	struct s3c_hwmon_chcfg *cfg;
 
 	cfg = pdata->in[sen_attr->index];
@@ -274,7 +274,7 @@ static void s3c_hwmon_remove_attr(struct device *dev,
 */
 static int s3c_hwmon_probe(struct platform_device *dev)
 {
-	struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
+	struct s3c_hwmon_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct s3c_hwmon *hwmon;
 	int ret = 0;
 	int i;

drivers/hwmon/sht15.c

@@ -940,11 +940,11 @@ static int sht15_probe(struct platform_device *pdev)
 	data->dev = &pdev->dev;
 	init_waitqueue_head(&data->wait_queue);
 
-	if (pdev->dev.platform_data == NULL) {
+	if (dev_get_platdata(&pdev->dev) == NULL) {
 		dev_err(&pdev->dev, "no platform data supplied\n");
 		return -EINVAL;
 	}
-	data->pdata = pdev->dev.platform_data;
+	data->pdata = dev_get_platdata(&pdev->dev);
 	data->supply_uv = data->pdata->supply_mv * 1000;
 	if (data->pdata->checksum)
 		data->checksumming = true;

drivers/hwmon/smsc47m1.c

@@ -668,7 +668,7 @@ static void smsc47m1_remove_files(struct device *dev)
 static int __init smsc47m1_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct smsc47m1_sio_data *sio_data = dev->platform_data;
+	struct smsc47m1_sio_data *sio_data = dev_get_platdata(dev);
 	struct smsc47m1_data *data;
 	struct resource *res;
 	int err;
@@ -940,7 +940,7 @@ static int __init sm_smsc47m1_init(void)
 static void __exit sm_smsc47m1_exit(void)
 {
 	platform_driver_unregister(&smsc47m1_driver);
-	smsc47m1_restore(pdev->dev.platform_data);
+	smsc47m1_restore(dev_get_platdata(&pdev->dev));
 	platform_device_unregister(pdev);
 }
 

drivers/hwmon/w83627ehf.c

@@ -673,7 +673,7 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
 static void w83627ehf_write_fan_div_common(struct device *dev,
 					   struct w83627ehf_data *data, int nr)
 {
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 
 	if (sio_data->kind == nct6776)
 		; /* no dividers, do nothing */
@@ -724,7 +724,7 @@ static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
 static void w83627ehf_update_fan_div_common(struct device *dev,
 					    struct w83627ehf_data *data)
 {
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 
 	if (sio_data->kind == nct6776)
 		; /* no dividers, do nothing */
@@ -781,7 +781,7 @@ static void w83627ehf_update_pwm(struct w83627ehf_data *data)
 static void w83627ehf_update_pwm_common(struct device *dev,
 					struct w83627ehf_data *data)
 {
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 
 	if (sio_data->kind == nct6775 || sio_data->kind == nct6776)
 		nct6775_update_pwm(data);
@@ -792,7 +792,7 @@ static void w83627ehf_update_pwm_common(struct device *dev,
 static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 
 	int i;
 
@@ -1392,7 +1392,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 	int nr = sensor_attr->index;
 	unsigned long val;
 	int err;
@@ -1448,7 +1448,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
 	unsigned long val;
@@ -1527,7 +1527,7 @@ store_tolerance(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
 	u16 reg;
@@ -2065,7 +2065,7 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
 static int w83627ehf_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 	struct w83627ehf_data *data;
 	struct resource *res;
 	u8 en_vrm10;
@@ -2618,7 +2618,7 @@ static int w83627ehf_remove(struct platform_device *pdev)
 static int w83627ehf_suspend(struct device *dev)
 {
 	struct w83627ehf_data *data = w83627ehf_update_device(dev);
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 
 	mutex_lock(&data->update_lock);
 	data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
@@ -2634,7 +2634,7 @@ static int w83627ehf_suspend(struct device *dev)
 static int w83627ehf_resume(struct device *dev)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
-	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+	struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -2694,6 +2694,8 @@ static int w83627ehf_resume(struct device *dev)
 static const struct dev_pm_ops w83627ehf_dev_pm_ops = {
 	.suspend = w83627ehf_suspend,
 	.resume = w83627ehf_resume,
+	.freeze = w83627ehf_suspend,
+	.restore = w83627ehf_resume,
 };
 
 #define W83627EHF_DEV_PM_OPS	(&w83627ehf_dev_pm_ops)

drivers/hwmon/w83627hf.c

@@ -1415,7 +1415,7 @@ static const struct attribute_group w83627hf_group_opt = {
 static int w83627hf_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct w83627hf_sio_data *sio_data = dev->platform_data;
+	struct w83627hf_sio_data *sio_data = dev_get_platdata(dev);
 	struct w83627hf_data *data;
 	struct resource *res;
 	int err, i;
@@ -1636,7 +1636,7 @@ static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
 
 static int w83627thf_read_gpio5(struct platform_device *pdev)
 {
-	struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
+	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int res = 0xff, sel;
 
 	superio_enter(sio_data);
@@ -1669,7 +1669,7 @@ static int w83627thf_read_gpio5(struct platform_device *pdev)
 
 static int w83687thf_read_vid(struct platform_device *pdev)
 {
-	struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
+	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 	int res = 0xff;
 
 	superio_enter(sio_data);

drivers/misc/ics932s401.c

@@ -2,7 +2,7 @@
  * A driver for the Integrated Circuits ICS932S401
  * Copyright (C) 2008 IBM
  *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -482,7 +482,7 @@ static int ics932s401_remove(struct i2c_client *client)
 
 module_i2c_driver(ics932s401_driver);
 
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
 MODULE_DESCRIPTION("ICS932S401 driver");
 MODULE_LICENSE("GPL");