Commit 7e767ab5 authored by Jacky Bai's avatar Jacky Bai Committed by Shawn Guo

arm64: dts: imx8mm: Add imx8mm ddr4 evk board support

Add the board dts support for i.MX8MM DDR4 EVK board.
Signed-off-by: default avatarJacky Bai <ping.bai@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent aa71d064
......@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
......
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2020 NXP
*/
/dts-v1/;
#include "imx8mm-evk.dtsi"
/ {
model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
compatible = "fsl,imx8mm-ddr4-evk", "fsl,imx8mm";
leds {
pinctrl-0 = <&pinctrl_gpio_led_2>;
status {
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
};
};
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "okay";
};
&iomuxc {
pinctrl_gpmi_nand: gpmi-nand {
fsl,pins = <
MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096
MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096
MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x00000096
MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE 0x00000096
MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x00000096
MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x00000096
MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x00000096
MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x00000096
MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x00000096
MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x00000096
MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x00000096
MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x00000096
MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x00000096
MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x00000056
MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x00000096
MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x00000096
>;
};
pinctrl_gpio_led_2: gpioled2grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19
>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment