Commit 7ea1362c authored by Vivek Natarajan's avatar Vivek Natarajan Committed by John W. Linville

ath9k_hw: Improve idle power consumption for AR9485.

Set some GPIO pins to Pull-down mode to save power.
Signed-off-by: default avatarVivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2e286947
...@@ -667,6 +667,7 @@ static const u32 ar9485_1_0_pcie_phy_clkreq_enable_L1[][2] = { ...@@ -667,6 +667,7 @@ static const u32 ar9485_1_0_pcie_phy_clkreq_enable_L1[][2] = {
static const u32 ar9485_1_0_soc_preamble[][2] = { static const u32 ar9485_1_0_soc_preamble[][2] = {
/* Addr allmodes */ /* Addr allmodes */
{0x00004090, 0x00aa10aa},
{0x000040a4, 0x00a0c9c9}, {0x000040a4, 0x00a0c9c9},
{0x00007048, 0x00000004}, {0x00007048, 0x00000004},
}; };
...@@ -1708,6 +1709,7 @@ static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = { ...@@ -1708,6 +1709,7 @@ static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
static const u32 ar9485_1_1_soc_preamble[][2] = { static const u32 ar9485_1_1_soc_preamble[][2] = {
/* Addr allmodes */ /* Addr allmodes */
{0x00004014, 0xba280400}, {0x00004014, 0xba280400},
{0x00004090, 0x00aa10aa},
{0x000040a4, 0x00a0c9c9}, {0x000040a4, 0x00a0c9c9},
{0x00007010, 0x00000022}, {0x00007010, 0x00000022},
{0x00007020, 0x00000000}, {0x00007020, 0x00000000},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment