Commit 7eb42da6 authored by Liming Sun's avatar Liming Sun Committed by Ulf Hansson

mmc: sdhci-of-dwcmshc: Add hw_reset() support for BlueField-3 SoC

The eMMC RST_N register is implemented as secure register on
the BlueField-3 SoC and controlled by TF-A. This commit adds the
hw_reset() support which sends an SMC call to TF-A for the eMMC
HW reset.
Reviewed-by: default avatarDavid Thompson <davthompson@nvidia.com>
Signed-off-by: default avatarLiming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/20240827164016.237617-1-limings@nvidia.comSigned-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent f5e1638b
......@@ -8,6 +8,7 @@
*/
#include <linux/acpi.h>
#include <linux/arm-smccc.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
......@@ -201,6 +202,9 @@
SDHCI_TRNS_BLK_CNT_EN | \
SDHCI_TRNS_DMA)
/* SMC call for BlueField-3 eMMC RST_N */
#define BLUEFIELD_SMC_SET_EMMC_RST_N 0x82000007
enum dwcmshc_rk_type {
DWCMSHC_RK3568,
DWCMSHC_RK3588,
......@@ -1111,6 +1115,29 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
.irq = dwcmshc_cqe_irq_handler,
};
#ifdef CONFIG_ACPI
static void dwcmshc_bf3_hw_reset(struct sdhci_host *host)
{
struct arm_smccc_res res = { 0 };
arm_smccc_smc(BLUEFIELD_SMC_SET_EMMC_RST_N, 0, 0, 0, 0, 0, 0, 0, &res);
if (res.a0)
pr_err("%s: RST_N failed.\n", mmc_hostname(host->mmc));
}
static const struct sdhci_ops sdhci_dwcmshc_bf3_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.set_uhs_signaling = dwcmshc_set_uhs_signaling,
.get_max_clock = dwcmshc_get_max_clock,
.reset = sdhci_reset,
.adma_write_desc = dwcmshc_adma_write_desc,
.irq = dwcmshc_cqe_irq_handler,
.hw_reset = dwcmshc_bf3_hw_reset,
};
#endif
static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
.set_clock = dwcmshc_rk3568_set_clock,
.set_bus_width = sdhci_set_bus_width,
......@@ -1163,7 +1190,7 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_pdata = {
#ifdef CONFIG_ACPI
static const struct dwcmshc_pltfm_data sdhci_dwcmshc_bf3_pdata = {
.pdata = {
.ops = &sdhci_dwcmshc_ops,
.ops = &sdhci_dwcmshc_bf3_ops,
.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_ACMD23_BROKEN,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment