Commit 7eba413c authored by Maciej Purski's avatar Maciej Purski Committed by Krzysztof Kozlowski

ARM: dts: exynos: Use labels instead of full paths in exynos4210-universal_c210

Extend camera, fimc, mct and sysram nodes by labels, not by full path in
Exynos 4210 Universal C210 board.  This avoids error-prone redefinition
of nodes.
Signed-off-by: default avatarMaciej Purski <m.purski@samsung.com>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent 0f895e4e
......@@ -28,24 +28,6 @@ chosen {
stdout-path = &serial_2;
};
sysram@2020000 {
smp-sysram@0 {
status = "disabled";
};
smp-sysram@5000 {
compatible = "samsung,exynos4210-sysram";
reg = <0x5000 0x1000>;
};
smp-sysram@1f000 {
status = "disabled";
};
};
mct@10050000 {
compatible = "none";
};
fixed-rate-clocks {
xxti {
......@@ -173,45 +155,6 @@ lcd_ep: endpoint {
};
};
camera {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
fimc_0: fimc@11800000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
fimc_2: fimc@11820000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
<&clock CLK_SCLK_FIMC2>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
fimc_3: fimc@11830000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
<&clock CLK_SCLK_FIMC3>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
};
hdmi_en: voltage-regulator-hdmi-5v {
compatible = "regulator-fixed";
regulator-name = "HDMI_5V";
......@@ -234,6 +177,13 @@ hdmi_ddc: i2c-ddc {
};
};
&camera {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
&cpu0 {
cpu0-supply = <&vdd_arm_reg>;
};
......@@ -250,6 +200,38 @@ &exynos_usbphy {
vbus-supply = <&safeout1_reg>;
};
&fimc_0 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
&fimc_1 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
&fimc_2 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
<&clock CLK_SCLK_FIMC2>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
&fimc_3 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
<&clock CLK_SCLK_FIMC3>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
&fimd {
pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
pinctrl-names = "default";
......@@ -501,6 +483,10 @@ &i2c_8 {
status = "okay";
};
&mct {
compatible = "none";
};
&mdma1 {
reg = <0x12840000 0x1000>;
};
......@@ -579,3 +565,18 @@ &serial_3 {
/delete-property/dmas;
/delete-property/dma-names;
};
&sysram {
smp-sysram@0 {
status = "disabled";
};
smp-sysram@5000 {
compatible = "samsung,exynos4210-sysram";
reg = <0x5000 0x1000>;
};
smp-sysram@1f000 {
status = "disabled";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment