arm64: dts: qcom: pm6150x: add ADC_TM definitions

Add ADC_TM peripheral definitions for PM6150 and PM6150L. Add
ADC peripheral definition for PM6150l, which is needed for ADC_TM.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Link: https://lore.kernel.org/r/1602160825-10414-2-git-send-email-jprakash@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/pm6150.dtsi

@@ -52,6 +52,16 @@ adc-chan@6 {
 			};
 		};
 
+		pm6150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm6150_gpio: gpios@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;

arch/arm64/boot/dts/qcom/pm6150l.dtsi

@@ -11,6 +11,30 @@ pm6150l_lsid4: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm6150l_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm6150l_gpio: gpios@c000 {
 			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;