Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal updates from Zhang Rui:
 "The latest Thermal Management updates for v4.9-rc3:

   - Fix a regression introduced by commit
     b721ca0d(thermal/powerclamp: remove cpu whitelist), that
     powerclamp driver checks cpu support in a wrong way. From: Eric
     Ernst.

   - Fix a problem that intel_pch_thermal driver misses passive trip
     point when the PCH thermal device has an ACPI companion device
     associated. From: Srinivas Pandruvada.

   - Add missing support for Haswell PCH thermal sensor. From: Srinivas
     Pandruvada"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/powerclamp: correct cpu support check
  thermal: intel_pch_thermal: Enable Haswell PCH
  thermal: intel_pch_thermal: Add an ACPI passive trip

drivers/thermal/intel_pch_thermal.c

@@ -20,10 +20,13 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/acpi.h>
 #include <linux/thermal.h>
 #include <linux/pm.h>
 
 /* Intel PCH thermal Device IDs */
+#define PCH_THERMAL_DID_HSW_1	0x9C24 /* Haswell PCH */
+#define PCH_THERMAL_DID_HSW_2	0x8C24 /* Haswell PCH */
 #define PCH_THERMAL_DID_WPT	0x9CA4 /* Wildcat Point */
 #define PCH_THERMAL_DID_SKL	0x9D31 /* Skylake PCH */
 
@@ -66,9 +69,53 @@ struct pch_thermal_device {
 	unsigned long crt_temp;
 	int hot_trip_id;
 	unsigned long hot_temp;
+	int psv_trip_id;
+	unsigned long psv_temp;
 	bool bios_enabled;
 };
 
+#ifdef CONFIG_ACPI
+
+/*
+ * On some platforms, there is a companion ACPI device, which adds
+ * passive trip temperature using _PSV method. There is no specific
+ * passive temperature setting in MMIO interface of this PCI device.
+ */
+static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
+				      int *nr_trips)
+{
+	struct acpi_device *adev;
+
+	ptd->psv_trip_id = -1;
+
+	adev = ACPI_COMPANION(&ptd->pdev->dev);
+	if (adev) {
+		unsigned long long r;
+		acpi_status status;
+
+		status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
+					       &r);
+		if (ACPI_SUCCESS(status)) {
+			unsigned long trip_temp;
+
+			trip_temp = DECI_KELVIN_TO_MILLICELSIUS(r);
+			if (trip_temp) {
+				ptd->psv_temp = trip_temp;
+				ptd->psv_trip_id = *nr_trips;
+				++(*nr_trips);
+			}
+		}
+	}
+}
+#else
+static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
+				      int *nr_trips)
+{
+	ptd->psv_trip_id = -1;
+
+}
+#endif
+
 static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
 {
 	u8 tsel;
@@ -119,6 +166,8 @@ static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
 		++(*nr_trips);
 	}
 
+	pch_wpt_add_acpi_psv_trip(ptd, nr_trips);
+
 	return 0;
 }
 
@@ -194,6 +243,8 @@ static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
 		*type = THERMAL_TRIP_CRITICAL;
 	else if (ptd->hot_trip_id == trip)
 		*type = THERMAL_TRIP_HOT;
+	else if (ptd->psv_trip_id == trip)
+		*type = THERMAL_TRIP_PASSIVE;
 	else
 		return -EINVAL;
 
@@ -208,6 +259,8 @@ static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *tem
 		*temp = ptd->crt_temp;
 	else if (ptd->hot_trip_id == trip)
 		*temp = ptd->hot_temp;
+	else if (ptd->psv_trip_id == trip)
+		*temp = ptd->psv_temp;
 	else
 		return -EINVAL;
 
@@ -242,6 +295,11 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
 		ptd->ops = &pch_dev_ops_wpt;
 		dev_name = "pch_skylake";
 		break;
+	case PCH_THERMAL_DID_HSW_1:
+	case PCH_THERMAL_DID_HSW_2:
+		ptd->ops = &pch_dev_ops_wpt;
+		dev_name = "pch_haswell";
+		break;
 	default:
 		dev_err(&pdev->dev, "unknown pch thermal device\n");
 		return -ENODEV;
@@ -324,6 +382,8 @@ static int intel_pch_thermal_resume(struct device *device)
 static struct pci_device_id intel_pch_thermal_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2) },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);

drivers/thermal/intel_powerclamp.c

@@ -669,20 +669,10 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = {
 	.set_cur_state = powerclamp_set_cur_state,
 };
 
-static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = {
-	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT },
-	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ARAT },
-	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_NONSTOP_TSC },
-	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_CONSTANT_TSC},
-	{}
-};
-MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
-
 static int __init powerclamp_probe(void)
 {
-	if (!x86_match_cpu(intel_powerclamp_ids)) {
-		pr_err("Intel powerclamp does not run on family %d model %d\n",
-				boot_cpu_data.x86, boot_cpu_data.x86_model);
+	if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
+		pr_err("CPU does not support MWAIT");
 		return -ENODEV;
 	}