dt-bindings: Add missing 'additionalProperties: false'

Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.

Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.

So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>

Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml

@@ -21,6 +21,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     clkmgr@ffd04000 {

Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml

@@ -43,6 +43,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     ao-secure@140 {

Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml

@@ -43,6 +43,8 @@ required:
   - reg-names
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/arm/renesas,prr.yaml

@@ -27,6 +27,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     prr: chipid@ff000044 {

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml

@@ -30,6 +30,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     chipid@10000000 {

Documentation/devicetree/bindings/arm/samsung/pmu.yaml

@@ -89,6 +89,8 @@ required:
   - clock-names
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>

Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml

@@ -23,6 +23,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     firmware@203f000 {

Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml

@@ -29,6 +29,8 @@ required:
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>

Documentation/devicetree/bindings/clock/fsl,plldig.yaml

@@ -44,6 +44,8 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Display PIXEL Clock node:
   - |

Documentation/devicetree/bindings/clock/imx8mn-clock.yaml

@@ -52,6 +52,8 @@ required:
   - clock-names
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |

Documentation/devicetree/bindings/clock/imx8mp-clock.yaml

@@ -52,6 +52,8 @@ required:
   - clock-names
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |

Documentation/devicetree/bindings/clock/milbeaut-clock.yaml

@@ -35,6 +35,8 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock controller node:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml

@@ -68,6 +68,8 @@ required:
   - nvmem-cell-names
   - '#thermal-sensor-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@900000 {

Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml

@@ -40,6 +40,8 @@ required:
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {

Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml

@@ -56,6 +56,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@300000 {

Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml

@@ -66,6 +66,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>

Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml

@@ -40,6 +40,8 @@ required:
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {

Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml

@@ -58,6 +58,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml

@@ -56,6 +56,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/qcom,gcc.yaml

@@ -74,6 +74,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for MSM8960:
   - |

Documentation/devicetree/bindings/clock/qcom,mmcc.yaml

@@ -74,6 +74,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 if:
   properties:
     compatible:

Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml

@@ -50,6 +50,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8998.h>

Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml

@@ -35,6 +35,8 @@ required:
   - compatible
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for SDM845: The below node should be defined inside
   # &apps_rsc node.

Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml

@@ -58,6 +58,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>

Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml

@@ -52,6 +52,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>

Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml

@@ -48,6 +48,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml

@@ -67,6 +67,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>

Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml

@@ -52,6 +52,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>

Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml

@@ -48,6 +48,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml

@@ -107,6 +107,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 examples:
   - |
     vpu: vpu@d0100000 {

Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml

@@ -43,6 +43,8 @@ required:
   - interrupts
   - '#dma-cells'
 
+additionalProperties: false
+
 examples:
   - |
     dma@3000000 {

Documentation/devicetree/bindings/dsp/fsl,dsp.yaml

@@ -68,6 +68,8 @@ required:
   - mbox-names
   - memory-region
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/firmware/imx/rsrc.h>

Documentation/devicetree/bindings/eeprom/at24.yaml

@@ -172,6 +172,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

@@ -34,9 +34,12 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     npe@c8006000 {
          compatible = "intel,ixp4xx-network-processing-engine";
          reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
     };
+...

Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml

@@ -47,6 +47,8 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 dependencies:
   interrupt-controller: [ interrupts ]
 

Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml

@@ -49,6 +49,8 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 examples:
   - |
     logicvc: logicvc@43c00000 {

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -53,6 +53,8 @@ required:
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml

@@ -94,6 +94,8 @@ required:
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml

@@ -115,6 +115,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/gpu/samsung-rotator.yaml

@@ -36,6 +36,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     rotator@12810000 {

Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml

@@ -47,6 +47,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml

@@ -87,6 +87,8 @@ required:
   - reg
 
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml

@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml

@@ -76,6 +76,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml

@@ -36,6 +36,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml

@@ -67,6 +67,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml

@@ -53,6 +53,8 @@ required:
   - dout-gpios
   - avdd-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml

@@ -32,6 +32,8 @@ required:
   - vref-supply
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

@@ -52,6 +52,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -69,6 +69,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 patternProperties:
   "^filter@[0-9]+$":
     type: object

Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml

@@ -38,6 +38,8 @@ required:
   - compatible
   - vcc-supply
 
+additionalProperties: false
+
 examples:
   - |
     serial {

Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml

@@ -24,6 +24,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml

@@ -34,6 +34,8 @@ required:
   - reg
   - vref-supply
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/light/adux1020.yaml

@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/bh1750.yaml

@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/light/isl29018.yaml

@@ -38,6 +38,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/noa1305.yaml

@@ -29,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/light/stk33xx.yaml

@@ -30,6 +30,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/tsl2583.yaml

@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/light/tsl2772.yaml

@@ -62,6 +62,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/veml6030.yaml

@@ -45,6 +45,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml

@@ -33,6 +33,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/pressure/bmp085.yaml

@@ -52,6 +52,8 @@ required:
   - vddd-supply
   - vdda-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml

@@ -56,6 +56,8 @@ required:
   - trig-gpios
   - echo-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml

@@ -42,6 +42,8 @@ required:
   - compatible
   - ping-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml

@@ -398,6 +398,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/input/gpio-vibrator.yaml

@@ -26,6 +26,8 @@ required:
   - compatible
   - enable-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/input/max77650-onkey.yaml

@@ -33,3 +33,6 @@ properties:
 
 required:
   - compatible
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml

@@ -44,6 +44,8 @@ required:
   - interrupt-controller
   - '#interrupt-cells'
 
+additionalProperties: false
+
 examples:
   - |
     intcon: interrupt-controller@c8003000 {

Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml

@@ -80,6 +80,8 @@ required:
   - clock-names
   - "#iommu-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>

Documentation/devicetree/bindings/leds/leds-max77650.yaml

@@ -49,3 +49,6 @@ required:
   - compatible
   - "#address-cells"
   - "#size-cells"
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml

@@ -50,3 +50,6 @@ patternProperties:
 
 required:
   - compatible
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml

@@ -41,6 +41,8 @@ required:
   - interrupts
   - "#mbox-cells"
 
+additionalProperties: false
+
 examples:
   - |
     mailbox@c883c404 {

Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml

@@ -124,6 +124,8 @@ required:
   - amlogic,ao-sysctrl
   - amlogic,canvas
 
+additionalProperties: false
+
 examples:
   - |
     vdec: video-decoder@c8820000 {

Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml

@@ -82,6 +82,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     cec_AO: cec@100 {

Documentation/devicetree/bindings/media/renesas,ceu.yaml

@@ -59,6 +59,8 @@ required:
   - interrupts
   - port
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/mfd/max77650.yaml

@@ -73,6 +73,8 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml

@@ -77,6 +77,8 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml

@@ -38,6 +38,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

@@ -167,6 +167,8 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml

@@ -34,6 +34,8 @@ required:
   - resets
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/sun50i-h6-ccu.h>

Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml

@@ -44,6 +44,8 @@ required:
   - reset-names
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     phy@46000 {

Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml

@@ -40,6 +40,8 @@ required:
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     sysconf: chiptop@e0200000 {

Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml

@@ -31,6 +31,8 @@ required:
   - reset-gpios
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -159,6 +159,8 @@ required:
   - "#reset-cells"
   - ranges
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/soc/ti,sci_pm_domain.h>

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -57,6 +57,8 @@ patternProperties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     syscon: scu@1e6e2000 {

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -70,6 +70,8 @@ required:
   - compatible
   - aspeed,external-nodes
 
+additionalProperties: false
+
 examples:
   - |
     apb {

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -92,6 +92,8 @@ patternProperties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     syscon: scu@1e6e2000 {

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

@@ -194,6 +194,8 @@ required:
   - ranges
   - pins-are-numbered
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/pinctrl/stm32-pinfunc.h>

Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml

@@ -68,6 +68,8 @@ required:
   - "#power-domain-cells"
   - amlogic,ao-sysctrl
 
+additionalProperties: false
+
 examples:
   - |
     pwrc: power-controller {

Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml

@@ -41,6 +41,8 @@ required:
   - regmap
   - offset
 
+additionalProperties: false
+
 allOf:
   - if:
       not:

Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml

@@ -41,6 +41,8 @@ required:
   - regmap
   - offset
 
+additionalProperties: false
+
 allOf:
   - if:
       not:

Documentation/devicetree/bindings/power/supply/max77650-charger.yaml

@@ -32,3 +32,6 @@ properties:
 
 required:
   - compatible
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml

@@ -55,6 +55,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c@1 {

Documentation/devicetree/bindings/regulator/max77650-regulator.yaml

@@ -29,3 +29,6 @@ patternProperties:
 
 required:
   - compatible
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml

@@ -29,6 +29,8 @@ required:
   - reg
   - "#reset-cells"
 
+additionalProperties: false
+
 examples:
   - |
     reset-controller@c884404 {

Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml

@@ -28,6 +28,8 @@ required:
   - reg
   - "#reset-cells"
 
+additionalProperties: false
+
 examples:
   - |
     reset-controller@8b2c800 {

Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml

@@ -29,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     rng@c8834000 {

Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml

@@ -35,6 +35,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     rng {

Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml

@@ -51,6 +51,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/r7s72100-clock.h>