wifi: rtw89: fix assignation of TX BD RAM table

TX BD's RAM table describes how HW allocates usable buffer section
for each TX channel at fetch time. The total RAM size for TX BD is
chip-dependent. For 8852BE, it has only half size (32) for TX channels
of single band. Original table arrange total size (64) for dual band.
It will overflow on 8852BE circuit and cause section conflicts between
different TX channels.

So, we do the changes below.
* add another table for single band chip and export both kind of tables
* point to the expected one in rtw89_pci_info by chip
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113090632.60957-4-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/pci.c

@@ -1384,7 +1384,7 @@ static int rtw89_pci_ops_tx_write(struct rtw89_dev *rtwdev, struct rtw89_core_tx
 	return 0;
 }
 
-static const struct rtw89_pci_bd_ram bd_ram_table[RTW89_TXCH_NUM] = {
+const struct rtw89_pci_bd_ram rtw89_bd_ram_table_dual[RTW89_TXCH_NUM] = {
 	[RTW89_TXCH_ACH0] = {.start_idx = 0,  .max_num = 5, .min_num = 2},
 	[RTW89_TXCH_ACH1] = {.start_idx = 5,  .max_num = 5, .min_num = 2},
 	[RTW89_TXCH_ACH2] = {.start_idx = 10, .max_num = 5, .min_num = 2},
@@ -1399,11 +1399,24 @@ static const struct rtw89_pci_bd_ram bd_ram_table[RTW89_TXCH_NUM] = {
 	[RTW89_TXCH_CH11] = {.start_idx = 55, .max_num = 5, .min_num = 1},
 	[RTW89_TXCH_CH12] = {.start_idx = 60, .max_num = 4, .min_num = 1},
 };
+EXPORT_SYMBOL(rtw89_bd_ram_table_dual);
+
+const struct rtw89_pci_bd_ram rtw89_bd_ram_table_single[RTW89_TXCH_NUM] = {
+	[RTW89_TXCH_ACH0] = {.start_idx = 0,  .max_num = 5, .min_num = 2},
+	[RTW89_TXCH_ACH1] = {.start_idx = 5,  .max_num = 5, .min_num = 2},
+	[RTW89_TXCH_ACH2] = {.start_idx = 10, .max_num = 5, .min_num = 2},
+	[RTW89_TXCH_ACH3] = {.start_idx = 15, .max_num = 5, .min_num = 2},
+	[RTW89_TXCH_CH8]  = {.start_idx = 20, .max_num = 4, .min_num = 1},
+	[RTW89_TXCH_CH9]  = {.start_idx = 24, .max_num = 4, .min_num = 1},
+	[RTW89_TXCH_CH12] = {.start_idx = 28, .max_num = 4, .min_num = 1},
+};
+EXPORT_SYMBOL(rtw89_bd_ram_table_single);
 
 static void rtw89_pci_reset_trx_rings(struct rtw89_dev *rtwdev)
 {
 	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
 	const struct rtw89_pci_info *info = rtwdev->pci_info;
+	const struct rtw89_pci_bd_ram *bd_ram_table = *info->bd_ram_table;
 	struct rtw89_pci_tx_ring *tx_ring;
 	struct rtw89_pci_rx_ring *rx_ring;
 	struct rtw89_pci_dma_ring *bd_ring;

drivers/net/wireless/realtek/rtw89/pci.h

@@ -750,6 +750,12 @@ struct rtw89_pci_ch_dma_addr_set {
 	struct rtw89_pci_ch_dma_addr rx[RTW89_RXCH_NUM];
 };
 
+struct rtw89_pci_bd_ram {
+	u8 start_idx;
+	u8 max_num;
+	u8 min_num;
+};
+
 struct rtw89_pci_info {
 	enum mac_ax_bd_trunc_mode txbd_trunc_mode;
 	enum mac_ax_bd_trunc_mode rxbd_trunc_mode;
@@ -785,6 +791,7 @@ struct rtw89_pci_info {
 	u32 tx_dma_ch_mask;
 	const struct rtw89_pci_bd_idx_addr *bd_idx_addr_low_power;
 	const struct rtw89_pci_ch_dma_addr_set *dma_addr_set;
+	const struct rtw89_pci_bd_ram (*bd_ram_table)[RTW89_TXCH_NUM];
 
 	int (*ltr_set)(struct rtw89_dev *rtwdev, bool en);
 	u32 (*fill_txaddr_info)(struct rtw89_dev *rtwdev,
@@ -798,12 +805,6 @@ struct rtw89_pci_info {
 				struct rtw89_pci_isrs *isrs);
 };
 
-struct rtw89_pci_bd_ram {
-	u8 start_idx;
-	u8 max_num;
-	u8 min_num;
-};
-
 struct rtw89_pci_tx_data {
 	dma_addr_t dma;
 };
@@ -1057,6 +1058,8 @@ static inline bool rtw89_pci_ltr_is_err_reg_val(u32 val)
 extern const struct dev_pm_ops rtw89_pm_ops;
 extern const struct rtw89_pci_ch_dma_addr_set rtw89_pci_ch_dma_addr_set;
 extern const struct rtw89_pci_ch_dma_addr_set rtw89_pci_ch_dma_addr_set_v1;
+extern const struct rtw89_pci_bd_ram rtw89_bd_ram_table_dual[RTW89_TXCH_NUM];
+extern const struct rtw89_pci_bd_ram rtw89_bd_ram_table_single[RTW89_TXCH_NUM];
 
 struct pci_device_id;
 

drivers/net/wireless/realtek/rtw89/rtw8852ae.c

@@ -44,6 +44,7 @@ static const struct rtw89_pci_info rtw8852a_pci_info = {
 	.tx_dma_ch_mask		= 0,
 	.bd_idx_addr_low_power	= NULL,
 	.dma_addr_set		= &rtw89_pci_ch_dma_addr_set,
+	.bd_ram_table		= &rtw89_bd_ram_table_dual,
 
 	.ltr_set		= rtw89_pci_ltr_set,
 	.fill_txaddr_info	= rtw89_pci_fill_txaddr_info,

drivers/net/wireless/realtek/rtw89/rtw8852be.c

@@ -46,6 +46,7 @@ static const struct rtw89_pci_info rtw8852b_pci_info = {
 				  BIT(RTW89_TXCH_CH10) | BIT(RTW89_TXCH_CH11),
 	.bd_idx_addr_low_power	= NULL,
 	.dma_addr_set		= &rtw89_pci_ch_dma_addr_set,
+	.bd_ram_table		= &rtw89_bd_ram_table_single,
 
 	.ltr_set		= rtw89_pci_ltr_set,
 	.fill_txaddr_info	= rtw89_pci_fill_txaddr_info,

drivers/net/wireless/realtek/rtw89/rtw8852ce.c

@@ -53,6 +53,7 @@ static const struct rtw89_pci_info rtw8852c_pci_info = {
 	.tx_dma_ch_mask		= 0,
 	.bd_idx_addr_low_power	= &rtw8852c_bd_idx_addr_low_power,
 	.dma_addr_set		= &rtw89_pci_ch_dma_addr_set_v1,
+	.bd_ram_table		= &rtw89_bd_ram_table_dual,
 
 	.ltr_set		= rtw89_pci_ltr_set_v1,
 	.fill_txaddr_info	= rtw89_pci_fill_txaddr_info_v1,