Commit 7f78b6eb authored by Romain Naour's avatar Romain Naour Committed by Kukjin Kim

ARM: S3C24XX: Add samsung-time support for s3c24xx

Signed-off-by: default avatarNaour Romain <romain.naour@openwide.fr>
Reviewed-by: default avatarTomasz Figa <tomasz.figa@gmail.com>
[heiko@sntech.de: tested on a s3c2416 based machine]
Reviewed-and-Tested-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent c1fcd403
......@@ -770,8 +770,10 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
......
......@@ -30,6 +30,7 @@ config CPU_S3C2410
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
select SAMSUNG_HRT
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
......@@ -41,6 +42,7 @@ config CPU_S3C2412
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
......@@ -53,6 +55,7 @@ config CPU_S3C2416
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
......@@ -63,6 +66,7 @@ config CPU_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
......@@ -72,6 +76,7 @@ config CPU_S3C2442
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
......@@ -87,6 +92,7 @@ config CPU_S3C2443
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
......
......@@ -63,6 +63,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <plat/samsung-time.h>
#include "common.h"
static struct resource amlm5900_nor_resource =
......@@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void)
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
#ifdef CONFIG_FB_S3C2410
......@@ -237,6 +240,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/samsung-time.h>
#include "anubis.h"
#include "common.h"
......@@ -410,6 +411,7 @@ static void __init anubis_map_io(void)
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
......@@ -444,6 +446,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -48,6 +48,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include <plat/samsung-time.h>
#include "common.h"
......@@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void)
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init at2440evb_init(void)
......@@ -210,6 +212,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -55,6 +55,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
......@@ -576,6 +577,7 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init(void)
......@@ -605,6 +607,6 @@ MACHINE_START(BAST, "Simtec-BAST")
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -81,6 +81,7 @@
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "gta02.h"
......@@ -501,6 +502,7 @@ static void __init gta02_map_io(void)
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
......@@ -589,6 +591,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -62,7 +62,7 @@
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
......@@ -646,6 +646,7 @@ static void __init h1940_map_io(void)
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
......@@ -741,6 +742,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -52,6 +52,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "s3c2412-power.h"
......@@ -506,6 +507,7 @@ static void __init jive_map_io(void)
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void jive_power_off(void)
......@@ -661,6 +663,6 @@ MACHINE_START(JIVE, "JIVE")
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
......@@ -56,6 +56,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include <sound/s3c24xx_uda134x.h>
......@@ -525,6 +526,7 @@ static void __init mini2440_map_io(void)
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/*
......@@ -687,6 +689,6 @@ MACHINE_START(MINI2440, "MINI2440")
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <plat/samsung-time.h>
#include "common.h"
......@@ -535,6 +536,7 @@ static void __init n30_map_io(void)
n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
......@@ -588,7 +590,7 @@ MACHINE_START(N30, "Acer-N30")
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
......@@ -599,7 +601,7 @@ MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
......
......@@ -44,6 +44,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include "common.h"
......@@ -135,6 +136,7 @@ static void __init nexcoder_map_io(void)
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
......@@ -151,6 +153,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -45,6 +45,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
......@@ -384,6 +385,7 @@ static void __init osiris_map_io(void)
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
......@@ -426,6 +428,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -33,6 +33,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "otom.h"
......@@ -101,6 +102,7 @@ static void __init otom11_map_io(void)
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init otom11_init(void)
......@@ -115,6 +117,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -59,6 +59,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
......@@ -304,6 +305,7 @@ static void __init qt2410_map_io(void)
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init qt2410_machine_init(void)
......@@ -343,6 +345,6 @@ MACHINE_START(QT2410, "QT2410")
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -58,6 +58,7 @@
#include <plat/pm.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
......@@ -741,6 +742,7 @@ static void __init rx1950_map_io(void)
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
......@@ -813,6 +815,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
......@@ -179,6 +180,7 @@ static void __init rx3715_map_io(void)
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* H1940 and RX3715 need to reserve this for suspend */
......@@ -212,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -51,6 +51,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
......@@ -100,6 +101,7 @@ static void __init smdk2410_map_io(void)
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2410_init(void)
......@@ -116,6 +118,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -44,6 +44,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
......@@ -105,6 +106,7 @@ static void __init smdk2413_map_io(void)
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2413_machine_init(void)
......@@ -131,7 +133,7 @@ MACHINE_START(S3C2413, "S3C2413")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
......@@ -143,7 +145,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
......@@ -155,6 +157,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
......@@ -50,6 +50,7 @@
#include <plat/sdhci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <plat/samsung-time.h>
#include <plat/fb.h>
......@@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void)
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2416_machine_init(void)
......@@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2416_restart,
MACHINE_END
......@@ -41,6 +41,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
......@@ -160,6 +161,7 @@ static void __init smdk2440_map_io(void)
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2440_machine_init(void)
......@@ -178,6 +180,6 @@ MACHINE_START(S3C2440, "SMDK2440")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
......@@ -41,6 +41,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
......@@ -121,6 +122,7 @@ static void __init smdk2443_map_io(void)
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2443_machine_init(void)
......@@ -142,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2443_restart,
MACHINE_END
......@@ -53,6 +53,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <plat/samsung-time.h>
#include "common.h"
......@@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void)
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init tct_hammer_init(void)
......@@ -149,6 +151,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -45,6 +45,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
......@@ -332,6 +333,7 @@ static void __init vr1000_map_io(void)
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vr1000_init(void)
......@@ -354,6 +356,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -44,6 +44,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
#include "common.h"
......@@ -142,6 +143,7 @@ static void __init vstms_map_io(void)
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vstms_init(void)
......@@ -159,6 +161,6 @@ MACHINE_START(VSTMS, "VSTMS")
.init_irq = s3c24xx_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
.init_time = s3c24xx_timer_init,
.init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
......@@ -192,7 +192,7 @@ extern void s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
/* timer for 2410/2440 */
/* timer for s5pc100 only */
extern void s3c24xx_timer_init(void);
......
......@@ -30,7 +30,18 @@ struct samsung_timer_source {
/* Be able to sleep for atleast 4 seconds (usually more) */
#define SAMSUNG_TIMER_MIN_RANGE 4
#ifdef CONFIG_ARCH_S3C24XX
#define TCNT_MAX 0xffff
#define TSCALER_DIV 25
#define TDIV 50
#define TSIZE 16
#else
#define TCNT_MAX 0xffffffff
#define TSCALER_DIV 2
#define TDIV 2
#define TSIZE 32
#endif
#define NON_PERIODIC 0
#define PERIODIC 1
......
......@@ -2,7 +2,7 @@
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* SAMSUNG - Common hr-timer support
* samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -267,8 +267,8 @@ static void __init samsung_clockevent_init(void)
tscaler = clk_get_parent(tdiv_event);
clk_set_rate(tscaler, pclk / 2);
clk_set_rate(tdiv_event, pclk / 2);
clk_set_rate(tscaler, pclk / TSCALER_DIV);
clk_set_rate(tdiv_event, pclk / TDIV);
clk_set_parent(tin_event, tdiv_event);
clock_rate = clk_get_rate(tin_event);
......@@ -329,7 +329,7 @@ static void __init samsung_clocksource_init(void)
pclk = clk_get_rate(timerclk);
clk_set_rate(tdiv_source, pclk / 2);
clk_set_rate(tdiv_source, pclk / TDIV);
clk_set_parent(tin_source, tdiv_source);
clock_rate = clk_get_rate(tin_source);
......@@ -337,10 +337,10 @@ static void __init samsung_clocksource_init(void)
samsung_time_setup(timer_source.source_id, TCNT_MAX);
samsung_time_start(timer_source.source_id, PERIODIC);
setup_sched_clock(samsung_read_sched_clock, 32, clock_rate);
setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
clock_rate, 250, 32, clocksource_mmio_readl_down))
clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
panic("samsung_clocksource_timer: can't register clocksource\n");
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment