ARM: S3C24XX: Add samsung-time support for s3c24xx

Signed-off-by: Naour Romain <romain.naour@openwide.fr>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
[heiko@sntech.de: tested on a s3c2416 based machine]
Reviewed-and-Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/Kconfig

@@ -770,8 +770,10 @@ config ARCH_SA1100
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
-	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG

arch/arm/mach-s3c24xx/Kconfig

@@ -30,6 +30,7 @@ config CPU_S3C2410
 	select S3C2410_CLOCK
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	select S3C2410_PM if PM
+	select SAMSUNG_HRT
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -41,6 +42,7 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
+	select SAMSUNG_HRT
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -53,6 +55,7 @@ config CPU_S3C2416
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_HRT
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -63,6 +66,7 @@ config CPU_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
+	select SAMSUNG_HRT
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -72,6 +76,7 @@ config CPU_S3C2442
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
+	select SAMSUNG_HRT
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
 
@@ -87,6 +92,7 @@ config CPU_S3C2443
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_HRT
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -63,6 +63,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 
+#include <plat/samsung-time.h>
+
 #include "common.h"
 
 static struct resource amlm5900_nor_resource =
@@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void)
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 #ifdef CONFIG_FB_S3C2410
@@ -237,6 +240,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
 
 #include "anubis.h"
 #include "common.h"
@@ -410,6 +411,7 @@ static void __init anubis_map_io(void)
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* check for the newer revision boards with large page nand */
 
@@ -444,6 +446,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -48,6 +48,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void)
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init at2440evb_init(void)
@@ -210,6 +212,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-bast.c

@@ -55,6 +55,7 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "bast.h"
 #include "common.h"
@@ -576,6 +577,7 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init bast_init(void)
@@ -605,6 +607,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -81,6 +81,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "gta02.h"
@@ -501,6 +502,7 @@ static void __init gta02_map_io(void)
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 
@@ -589,6 +591,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -62,7 +62,7 @@
 #include <plat/pll.h>
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "h1940.h"
@@ -646,6 +646,7 @@ static void __init h1940_map_io(void)
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* setup PM */
 
@@ -741,6 +742,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-jive.c

@@ -52,6 +52,7 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "s3c2412-power.h"
@@ -506,6 +507,7 @@ static void __init jive_map_io(void)
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void jive_power_off(void)
@@ -661,6 +663,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -56,6 +56,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include <sound/s3c24xx_uda134x.h>
 
@@ -525,6 +526,7 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 /*
@@ -687,6 +689,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-n30.c

@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -535,6 +536,7 @@ static void __init n30_map_io(void)
 	n30_hwinit();
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -588,7 +590,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
@@ -599,7 +601,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -44,6 +44,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -135,6 +136,7 @@ static void __init nexcoder_map_io(void)
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
@@ -151,6 +153,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -45,6 +45,7 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
@@ -384,6 +385,7 @@ static void __init osiris_map_io(void)
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* check for the newer revision boards with large page nand */
 
@@ -426,6 +428,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-otom.c

@@ -33,6 +33,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "otom.h"
@@ -101,6 +102,7 @@ static void __init otom11_map_io(void)
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init otom11_init(void)
@@ -115,6 +117,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -59,6 +59,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "common-smdk.h"
@@ -304,6 +305,7 @@ static void __init qt2410_map_io(void)
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
 	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init qt2410_machine_init(void)
@@ -343,6 +345,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -58,6 +58,7 @@
 #include <plat/pm.h>
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "h1940.h"
@@ -741,6 +742,7 @@ static void __init rx1950_map_io(void)
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* setup PM */
 
@@ -813,6 +815,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "h1940.h"
@@ -179,6 +180,7 @@ static void __init rx3715_map_io(void)
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 /* H1940 and RX3715 need to reserve this for suspend */
@@ -212,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -51,6 +51,7 @@
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "common-smdk.h"
@@ -100,6 +101,7 @@ static void __init smdk2410_map_io(void)
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2410_init(void)
@@ -116,6 +118,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -44,6 +44,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "common-smdk.h"
@@ -105,6 +106,7 @@ static void __init smdk2413_map_io(void)
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2413_machine_init(void)
@@ -131,7 +133,7 @@ MACHINE_START(S3C2413, "S3C2413")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -143,7 +145,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -155,6 +157,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -50,6 +50,7 @@
 #include <plat/sdhci.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
 
 #include <plat/fb.h>
 
@@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void)
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2416_machine_init(void)
@@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -41,6 +41,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "common-smdk.h"
@@ -160,6 +161,7 @@ static void __init smdk2440_map_io(void)
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2440_machine_init(void)
@@ -178,6 +180,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -41,6 +41,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "common-smdk.h"
@@ -121,6 +122,7 @@ static void __init smdk2443_map_io(void)
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2443_machine_init(void)
@@ -142,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2443_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -53,6 +53,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void)
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init tct_hammer_init(void)
@@ -149,6 +151,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -45,6 +45,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "bast.h"
 #include "common.h"
@@ -332,6 +333,7 @@ static void __init vr1000_map_io(void)
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init vr1000_init(void)
@@ -354,6 +356,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -44,6 +44,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -142,6 +143,7 @@ static void __init vstms_map_io(void)
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init vstms_init(void)
@@ -159,6 +161,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/plat-samsung/include/plat/cpu.h

@@ -192,7 +192,7 @@ extern void s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no);
 
-/* timer for 2410/2440 */
+/* timer for s5pc100 only */
 
 extern void s3c24xx_timer_init(void);
 

arch/arm/plat-samsung/include/plat/samsung-time.h

@@ -30,7 +30,18 @@ struct samsung_timer_source {
 /* Be able to sleep for atleast 4 seconds (usually more) */
 #define SAMSUNG_TIMER_MIN_RANGE	4
 
+#ifdef CONFIG_ARCH_S3C24XX
+#define TCNT_MAX		0xffff
+#define TSCALER_DIV		25
+#define TDIV			50
+#define TSIZE			16
+#else
 #define TCNT_MAX		0xffffffff
+#define TSCALER_DIV		2
+#define TDIV			2
+#define TSIZE			32
+#endif
+
 #define NON_PERIODIC		0
 #define PERIODIC		1
 

arch/arm/plat-samsung/samsung-time.c

@@ -2,7 +2,7 @@
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
- * SAMSUNG - Common hr-timer support
+ * samsung - Common hr-timer support (s3c and s5p)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -267,8 +267,8 @@ static void __init samsung_clockevent_init(void)
 
 	tscaler = clk_get_parent(tdiv_event);
 
-	clk_set_rate(tscaler, pclk / 2);
-	clk_set_rate(tdiv_event, pclk / 2);
+	clk_set_rate(tscaler, pclk / TSCALER_DIV);
+	clk_set_rate(tdiv_event, pclk / TDIV);
 	clk_set_parent(tin_event, tdiv_event);
 
 	clock_rate = clk_get_rate(tin_event);
@@ -329,7 +329,7 @@ static void __init samsung_clocksource_init(void)
 
 	pclk = clk_get_rate(timerclk);
 
-	clk_set_rate(tdiv_source, pclk / 2);
+	clk_set_rate(tdiv_source, pclk / TDIV);
 	clk_set_parent(tin_source, tdiv_source);
 
 	clock_rate = clk_get_rate(tin_source);
@@ -337,10 +337,10 @@ static void __init samsung_clocksource_init(void)
 	samsung_time_setup(timer_source.source_id, TCNT_MAX);
 	samsung_time_start(timer_source.source_id, PERIODIC);
 
-	setup_sched_clock(samsung_read_sched_clock, 32, clock_rate);
+	setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
 
 	if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
-			clock_rate, 250, 32, clocksource_mmio_readl_down))
+			clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
 		panic("samsung_clocksource_timer: can't register clocksource\n");
 }