ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options

Add a Kconfig menu (POWER_AVS) and rename the Kconfig options
for the OMAP SmartReflex implementation:
	CONFIG_OMAP_SMARTREFLEX renames to CONFIG_POWER_AVS_OMAP
	CONFIG_OMAP_SMARTREFLEX_CLASS3 renames to CONFIG_POWER_AVS_OMAP_CLASS3

This change makes the SmartReflex implementation ready for the move
to drivers/.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/Makefile

@@ -69,8 +69,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o \
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o \
 					   cpuidle44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
+
+obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o smartreflex.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)

arch/arm/mach-omap2/pm.h

@@ -88,7 +88,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
 static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
 
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
 extern void omap_enable_smartreflex_on_init(void);
 #else

arch/arm/plat-omap/Kconfig

@@ -45,37 +45,52 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
-config OMAP_SMARTREFLEX
-	bool "SmartReflex support"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+menuconfig POWER_AVS
+	tristate "Adaptive Voltage Scaling class support"
 	help
-	  Say Y if you want to enable SmartReflex.
+	  AVS(Adaptive Voltage Scaling) is a power management technique which
+	  finely controls the operating voltage of a device in order to optimize
+	   (i.e. reduce) its power consumption.
+	  At a given operating point the voltage is adapted depending on
+	  static factors (chip manufacturing process) and dynamic factors
+	  (temperature depending performance).
+	  AVS is also called SmartReflex on OMAP devices.
+
+	  Say Y here to enable Adaptive Voltage Scaling class support.
+
+if POWER_AVS
 
-	  SmartReflex can perform continuous dynamic voltage
-	  scaling around the nominal operating point voltage
-	  according to silicon characteristics and operating
-	  conditions. Enabling SmartReflex reduces power
-	  consumption.
+config POWER_AVS_OMAP
+	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	help
+	  Say Y to enable AVS support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
 
 	  Please note, that by default SmartReflex is only
-	  initialized. To enable the automatic voltage
-	  compensation for vdd mpu  and vdd core from user space,
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
 	  user must write 1 to
-		/debug/voltage/vdd_<X>/smartreflex/autocomp,
-	  where X is mpu or core for OMAP3.
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
 	  Optionally autocompensation can be enabled in the kernel
 	  by default during system init via the enable_on_init flag
 	  which an be passed as platform data to the smartreflex driver.
 
-config OMAP_SMARTREFLEX_CLASS3
+config POWER_AVS_OMAP_CLASS3
 	bool "Class 3 mode of Smartreflex Implementation"
-	depends on OMAP_SMARTREFLEX && TWL4030_CORE
+	depends on POWER_AVS_OMAP && TWL4030_CORE
 	help
 	  Say Y to enable Class 3 implementation of Smartreflex
 
 	  Class 3 implementation of Smartreflex employs continuous hardware
 	  voltage calibration.
 
+endif # POWER_AVS
+
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP

include/linux/power/smartreflex.h

@@ -207,7 +207,7 @@ struct omap_smartreflex_dev_attr {
 	const char      *sensor_voltdm_name;
 };
 
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
 /*
  * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
  * The smartreflex class driver should pass the class type.