Commit 8048d151 authored by Martin Sperl's avatar Martin Sperl Committed by Mark Brown

spi: bcm2835aux: add driver stats to debugfs

To estimate efficiency add statistics on transfer types
(polling and interrupt) used to debugfs.
Signed-off-by: default avatarMartin Sperl <kernel@martin.sperl.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent fedd6940
......@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
......@@ -104,8 +105,52 @@ struct bcm2835aux_spi {
int tx_len;
int rx_len;
int pending;
u64 count_transfer_polling;
u64 count_transfer_irq;
u64 count_transfer_irq_after_poll;
struct dentry *debugfs_dir;
};
#if defined(CONFIG_DEBUG_FS)
static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
const char *dname)
{
char name[64];
struct dentry *dir;
/* get full name */
snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname);
/* the base directory */
dir = debugfs_create_dir(name, NULL);
bs->debugfs_dir = dir;
/* the counters */
debugfs_create_u64("count_transfer_polling", 0444, dir,
&bs->count_transfer_polling);
debugfs_create_u64("count_transfer_irq", 0444, dir,
&bs->count_transfer_irq);
debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir,
&bs->count_transfer_irq_after_poll);
}
static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
{
debugfs_remove_recursive(bs->debugfs_dir);
bs->debugfs_dir = NULL;
}
#else
static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs)
{
}
static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
{
}
#endif /* CONFIG_DEBUG_FS */
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
{
return readl(bs->regs + reg);
......@@ -244,6 +289,9 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
/* update statistics */
bs->count_transfer_irq++;
/* fill in registers and fifos before enabling interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
......@@ -267,6 +315,9 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
unsigned long timeout;
/* update statistics */
bs->count_transfer_polling++;
/* configure spi */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
......@@ -287,6 +338,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
jiffies - timeout,
bs->tx_len, bs->rx_len);
/* forward to interrupt handler */
bs->count_transfer_irq_after_poll++;
return __bcm2835aux_spi_transfer_one_irq(master,
spi, tfr);
}
......@@ -536,6 +588,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
goto out_clk_disable;
}
bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev));
return 0;
out_clk_disable:
......@@ -550,6 +604,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bcm2835aux_debugfs_remove(bs);
bcm2835aux_spi_reset_hw(bs);
/* disable the HW block by releasing the clock */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment