Commit 80662f4f authored by Russell King (Oracle)'s avatar Russell King (Oracle) Committed by Jakub Kicinski

net: phylink: Force link down and retrigger resolve on interface change

On PHY state change the phylink_resolve() function can read stale
information from the MAC and report incorrect link speed and duplex to
the kernel message log.

Example with a Marvell 88X3310 PHY connected to a SerDes port on Marvell
88E6393X switch:
- PHY driver triggers state change due to PHY interface mode being
  changed from 10gbase-r to 2500base-x due to copper change in speed
  from 10Gbps to 2.5Gbps, but the PHY itself either hasn't yet changed
  its interface to the host, or the interrupt about loss of SerDes link
  hadn't arrived yet (there can be a delay of several milliseconds for
  this), so we still think that the 10gbase-r mode is up
- phylink_resolve()
  - phylink_mac_pcs_get_state()
    - this fills in speed=10g link=up
  - interface mode is updated to 2500base-x but speed is left at 10Gbps
  - phylink_major_config()
    - interface is changed to 2500base-x
  - phylink_link_up()
    - mv88e6xxx_mac_link_up()
      - .port_set_speed_duplex()
        - speed is set to 10Gbps
    - reports "Link is Up - 10Gbps/Full" to dmesg

Afterwards when the interrupt finally arrives for mv88e6xxx, another
resolve is forced in which we get the correct speed from
phylink_mac_pcs_get_state(), but since the interface is not being
changed anymore, we don't call phylink_major_config() but only
phylink_mac_config(), which does not set speed/duplex anymore.

To fix this, we need to force the link down and trigger another resolve
on PHY interface change event.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarMarek Behún <kabel@kernel.org>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent ddb826c2
......@@ -710,6 +710,7 @@ static void phylink_resolve(struct work_struct *w)
struct phylink_link_state link_state;
struct net_device *ndev = pl->netdev;
bool mac_config = false;
bool retrigger = false;
bool cur_link_state;
mutex_lock(&pl->state_mutex);
......@@ -723,6 +724,7 @@ static void phylink_resolve(struct work_struct *w)
link_state.link = false;
} else if (pl->mac_link_dropped) {
link_state.link = false;
retrigger = true;
} else {
switch (pl->cur_link_an_mode) {
case MLO_AN_PHY:
......@@ -747,6 +749,15 @@ static void phylink_resolve(struct work_struct *w)
/* Only update if the PHY link is up */
if (pl->phydev && pl->phy_state.link) {
/* If the interface has changed, force a
* link down event if the link isn't already
* down, and re-resolve.
*/
if (link_state.interface !=
pl->phy_state.interface) {
retrigger = true;
link_state.link = false;
}
link_state.interface = pl->phy_state.interface;
/* If we have a PHY, we need to update with
......@@ -789,7 +800,7 @@ static void phylink_resolve(struct work_struct *w)
else
phylink_link_up(pl, link_state);
}
if (!link_state.link && pl->mac_link_dropped) {
if (!link_state.link && retrigger) {
pl->mac_link_dropped = false;
queue_work(system_power_efficient_wq, &pl->resolve);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment