Commit 806fd188 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes

After commit bfcb8132 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.

Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.

Fixes: eaf4fac4 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e045124e
...@@ -150,6 +150,8 @@ static int sun7i_gmac_probe(struct platform_device *pdev) ...@@ -150,6 +150,8 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
plat_dat->init = sun7i_gmac_init; plat_dat->init = sun7i_gmac_init;
plat_dat->exit = sun7i_gmac_exit; plat_dat->exit = sun7i_gmac_exit;
plat_dat->fix_mac_speed = sun7i_fix_speed; plat_dat->fix_mac_speed = sun7i_fix_speed;
plat_dat->tx_fifo_size = 4096;
plat_dat->rx_fifo_size = 16384;
ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv); ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
if (ret) if (ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment