Commit 8076dd1b authored by Viresh Kumar's avatar Viresh Kumar Committed by Arnd Bergmann

SPEAr: Remove existing padmux support for SPEAr

We must use pinctrl framework instead of defining per SoC pinmux drivers. This
patch removes existing padmux support present for SPEAr platform.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: default avatarStephen Warren <swarren@wwwdotorg.org>
parent 52130b60
......@@ -20,7 +20,6 @@
#include <linux/amba/bus.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <plat/padmux.h>
/* spear3xx declarations */
/*
......@@ -43,147 +42,20 @@ void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
#define PMX_I2C_MASK (1 << 13)
#define PMX_SSP_CS_MASK (1 << 12)
#define PMX_SSP_MASK (1 << 11)
#define PMX_MII_MASK (1 << 10)
#define PMX_GPIO_PIN0_MASK (1 << 9)
#define PMX_GPIO_PIN1_MASK (1 << 8)
#define PMX_GPIO_PIN2_MASK (1 << 7)
#define PMX_GPIO_PIN3_MASK (1 << 6)
#define PMX_GPIO_PIN4_MASK (1 << 5)
#define PMX_GPIO_PIN5_MASK (1 << 4)
#define PMX_UART0_MODEM_MASK (1 << 3)
#define PMX_UART0_MASK (1 << 2)
#define PMX_TIMER_3_4_MASK (1 << 1)
#define PMX_TIMER_1_2_MASK (1 << 0)
/* pad mux devices */
extern struct pmx_dev spear3xx_pmx_firda;
extern struct pmx_dev spear3xx_pmx_i2c;
extern struct pmx_dev spear3xx_pmx_ssp_cs;
extern struct pmx_dev spear3xx_pmx_ssp;
extern struct pmx_dev spear3xx_pmx_mii;
extern struct pmx_dev spear3xx_pmx_gpio_pin0;
extern struct pmx_dev spear3xx_pmx_gpio_pin1;
extern struct pmx_dev spear3xx_pmx_gpio_pin2;
extern struct pmx_dev spear3xx_pmx_gpio_pin3;
extern struct pmx_dev spear3xx_pmx_gpio_pin4;
extern struct pmx_dev spear3xx_pmx_gpio_pin5;
extern struct pmx_dev spear3xx_pmx_uart0_modem;
extern struct pmx_dev spear3xx_pmx_uart0;
extern struct pmx_dev spear3xx_pmx_timer_3_4;
extern struct pmx_dev spear3xx_pmx_timer_1_2;
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* padmux plgpio devices */
extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
extern struct pmx_dev spear3xx_pmx_plgpio_28;
extern struct pmx_dev spear3xx_pmx_plgpio_29;
extern struct pmx_dev spear3xx_pmx_plgpio_30;
extern struct pmx_dev spear3xx_pmx_plgpio_31;
extern struct pmx_dev spear3xx_pmx_plgpio_32;
extern struct pmx_dev spear3xx_pmx_plgpio_33;
extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
#endif
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
/* pad mux modes */
extern struct pmx_mode spear300_nand_mode;
extern struct pmx_mode spear300_nor_mode;
extern struct pmx_mode spear300_photo_frame_mode;
extern struct pmx_mode spear300_lend_ip_phone_mode;
extern struct pmx_mode spear300_hend_ip_phone_mode;
extern struct pmx_mode spear300_lend_wifi_phone_mode;
extern struct pmx_mode spear300_hend_wifi_phone_mode;
extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
extern struct pmx_mode spear300_ata_pabx_i2s_mode;
extern struct pmx_mode spear300_caml_lcdw_mode;
extern struct pmx_mode spear300_camu_lcd_mode;
extern struct pmx_mode spear300_camu_wlcd_mode;
extern struct pmx_mode spear300_caml_lcd_mode;
/* pad mux devices */
extern struct pmx_dev spear300_pmx_fsmc_2_chips;
extern struct pmx_dev spear300_pmx_fsmc_4_chips;
extern struct pmx_dev spear300_pmx_keyboard;
extern struct pmx_dev spear300_pmx_clcd;
extern struct pmx_dev spear300_pmx_telecom_gpio;
extern struct pmx_dev spear300_pmx_telecom_tdm;
extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
extern struct pmx_dev spear300_pmx_telecom_camera;
extern struct pmx_dev spear300_pmx_telecom_dac;
extern struct pmx_dev spear300_pmx_telecom_i2s;
extern struct pmx_dev spear300_pmx_telecom_boot_pins;
extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
extern struct pmx_dev spear300_pmx_gpio1;
/* Add spear300 machine declarations here */
void __init spear300_clk_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
/* pad mux devices */
extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
extern struct pmx_dev spear310_pmx_emi_cs_2_3;
extern struct pmx_dev spear310_pmx_uart1;
extern struct pmx_dev spear310_pmx_uart2;
extern struct pmx_dev spear310_pmx_uart3_4_5;
extern struct pmx_dev spear310_pmx_fsmc;
extern struct pmx_dev spear310_pmx_rs485_0_1;
extern struct pmx_dev spear310_pmx_tdm0;
/* Add spear310 machine declarations here */
void __init spear310_clk_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
/* pad mux modes */
extern struct pmx_mode spear320_auto_net_smii_mode;
extern struct pmx_mode spear320_auto_net_mii_mode;
extern struct pmx_mode spear320_auto_exp_mode;
extern struct pmx_mode spear320_small_printers_mode;
/* pad mux devices */
extern struct pmx_dev spear320_pmx_clcd;
extern struct pmx_dev spear320_pmx_emi;
extern struct pmx_dev spear320_pmx_fsmc;
extern struct pmx_dev spear320_pmx_spp;
extern struct pmx_dev spear320_pmx_sdhci;
extern struct pmx_dev spear320_pmx_i2s;
extern struct pmx_dev spear320_pmx_uart1;
extern struct pmx_dev spear320_pmx_uart1_modem;
extern struct pmx_dev spear320_pmx_uart2;
extern struct pmx_dev spear320_pmx_touchscreen;
extern struct pmx_dev spear320_pmx_can;
extern struct pmx_dev spear320_pmx_sdhci_led;
extern struct pmx_dev spear320_pmx_pwm0;
extern struct pmx_dev spear320_pmx_pwm1;
extern struct pmx_dev spear320_pmx_pwm2;
extern struct pmx_dev spear320_pmx_pwm3;
extern struct pmx_dev spear320_pmx_ssp1;
extern struct pmx_dev spear320_pmx_ssp2;
extern struct pmx_dev spear320_pmx_mii1;
extern struct pmx_dev spear320_pmx_smii0;
extern struct pmx_dev spear320_pmx_smii1;
extern struct pmx_dev spear320_pmx_i2c1;
/* Add spear320 machine declarations here */
void __init spear320_clk_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
......
This diff is collapsed.
......@@ -22,128 +22,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
#define PAD_MUX_CONFIG_REG 0x08
/* devices */
static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
.name = "emi_cs_0_1_4_5",
.modes = pmx_emi_cs_0_1_4_5_modes,
.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev spear310_pmx_emi_cs_2_3 = {
.name = "emi_cs_2_3",
.modes = pmx_emi_cs_2_3_modes,
.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_uart1_modes[] = {
{
.ids = 0x00,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev spear310_pmx_uart1 = {
.name = "uart1",
.modes = pmx_uart1_modes,
.mode_count = ARRAY_SIZE(pmx_uart1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_uart2_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev spear310_pmx_uart2 = {
.name = "uart2",
.modes = pmx_uart2_modes,
.mode_count = ARRAY_SIZE(pmx_uart2_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
{
.ids = 0x00,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev spear310_pmx_uart3_4_5 = {
.name = "uart3_4_5",
.modes = pmx_uart3_4_5_modes,
.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_fsmc_modes[] = {
{
.ids = 0x00,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev spear310_pmx_fsmc = {
.name = "fsmc",
.modes = pmx_fsmc_modes,
.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
{
.ids = 0x00,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear310_pmx_rs485_0_1 = {
.name = "rs485_0_1",
.modes = pmx_rs485_0_1_modes,
.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_tdm0_modes[] = {
{
.ids = 0x00,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear310_pmx_tdm0 = {
.name = "tdm0",
.modes = pmx_tdm0_modes,
.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
.enb_on_reset = 1,
};
/* pmx driver structure */
static struct pmx_driver pmx_driver = {
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
......@@ -260,30 +138,6 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
/* padmux devices to enable */
static struct pmx_dev *spear310_evb_pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp,
&spear3xx_pmx_gpio_pin0,
&spear3xx_pmx_gpio_pin1,
&spear3xx_pmx_gpio_pin2,
&spear3xx_pmx_gpio_pin3,
&spear3xx_pmx_gpio_pin4,
&spear3xx_pmx_gpio_pin5,
&spear3xx_pmx_uart0,
/* spear310 specific devices */
&spear310_pmx_emi_cs_0_1_4_5,
&spear310_pmx_emi_cs_2_3,
&spear310_pmx_uart1,
&spear310_pmx_uart2,
&spear310_pmx_uart3_4_5,
&spear310_pmx_fsmc,
&spear310_pmx_rs485_0_1,
&spear310_pmx_tdm0,
};
/* DMAC platform data's slave info */
struct pl08x_channel_data spear310_dma_info[] = {
{
......@@ -518,7 +372,7 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
static void __init spear310_dt_init(void)
{
void __iomem *base;
int ret = 0;
int ret;
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
......@@ -553,19 +407,6 @@ static void __init spear310_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
if (of_machine_is_compatible("st,spear310-evb")) {
/* pmx initialization */
pmx_driver.base = base;
pmx_driver.mode = NULL;
pmx_driver.devs = spear310_evb_pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n",
ret);
}
}
static const char * const spear310_dt_board_compat[] = {
......
......@@ -23,373 +23,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
#define PAD_MUX_CONFIG_REG 0x0C
#define MODE_CONFIG_REG 0x10
/* modes */
#define AUTO_NET_SMII_MODE (1 << 0)
#define AUTO_NET_MII_MODE (1 << 1)
#define AUTO_EXP_MODE (1 << 2)
#define SMALL_PRINTERS_MODE (1 << 3)
#define ALL_MODES 0xF
struct pmx_mode spear320_auto_net_smii_mode = {
.id = AUTO_NET_SMII_MODE,
.name = "Automation Networking SMII Mode",
.mask = 0x00,
};
struct pmx_mode spear320_auto_net_mii_mode = {
.id = AUTO_NET_MII_MODE,
.name = "Automation Networking MII Mode",
.mask = 0x01,
};
struct pmx_mode spear320_auto_exp_mode = {
.id = AUTO_EXP_MODE,
.name = "Automation Expanded Mode",
.mask = 0x02,
};
struct pmx_mode spear320_small_printers_mode = {
.id = SMALL_PRINTERS_MODE,
.name = "Small Printers Mode",
.mask = 0x03,
};
/* devices */
static struct pmx_dev_mode pmx_clcd_modes[] = {
{
.ids = AUTO_NET_SMII_MODE,
.mask = 0x0,
},
};
struct pmx_dev spear320_pmx_clcd = {
.name = "clcd",
.modes = pmx_clcd_modes,
.mode_count = ARRAY_SIZE(pmx_clcd_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_emi_modes[] = {
{
.ids = AUTO_EXP_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev spear320_pmx_emi = {
.name = "emi",
.modes = pmx_emi_modes,
.mode_count = ARRAY_SIZE(pmx_emi_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_fsmc_modes[] = {
{
.ids = ALL_MODES,
.mask = 0x0,
},
};
struct pmx_dev spear320_pmx_fsmc = {
.name = "fsmc",
.modes = pmx_fsmc_modes,
.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_spp_modes[] = {
{
.ids = SMALL_PRINTERS_MODE,
.mask = 0x0,
},
};
struct pmx_dev spear320_pmx_spp = {
.name = "spp",
.modes = pmx_spp_modes,
.mode_count = ARRAY_SIZE(pmx_spp_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_sdhci_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
SMALL_PRINTERS_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev spear320_pmx_sdhci = {
.name = "sdhci",
.modes = pmx_sdhci_modes,
.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_i2s_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev spear320_pmx_i2s = {
.name = "i2s",
.modes = pmx_i2s_modes,
.mode_count = ARRAY_SIZE(pmx_i2s_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_uart1_modes[] = {
{
.ids = ALL_MODES,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
},
};
struct pmx_dev spear320_pmx_uart1 = {
.name = "uart1",
.modes = pmx_uart1_modes,
.mode_count = ARRAY_SIZE(pmx_uart1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
{
.ids = AUTO_EXP_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
PMX_SSP_CS_MASK,
}, {
.ids = SMALL_PRINTERS_MODE,
.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
},
};
struct pmx_dev spear320_pmx_uart1_modem = {
.name = "uart1_modem",
.modes = pmx_uart1_modem_modes,
.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_uart2_modes[] = {
{
.ids = ALL_MODES,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev spear320_pmx_uart2 = {
.name = "uart2",
.modes = pmx_uart2_modes,
.mode_count = ARRAY_SIZE(pmx_uart2_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_touchscreen_modes[] = {
{
.ids = AUTO_NET_SMII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev spear320_pmx_touchscreen = {
.name = "touchscreen",
.modes = pmx_touchscreen_modes,
.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_can_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev spear320_pmx_can = {
.name = "can",
.modes = pmx_can_modes,
.mode_count = ARRAY_SIZE(pmx_can_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev spear320_pmx_sdhci_led = {
.name = "sdhci_led",
.modes = pmx_sdhci_led_modes,
.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_pwm0_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_UART0_MODEM_MASK,
}, {
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_pwm0 = {
.name = "pwm0",
.modes = pmx_pwm0_modes,
.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_pwm1_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_UART0_MODEM_MASK,
}, {
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_pwm1 = {
.name = "pwm1",
.modes = pmx_pwm1_modes,
.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_pwm2_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
}, {
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_pwm2 = {
.name = "pwm2",
.modes = pmx_pwm2_modes,
.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_pwm3_modes[] = {
{
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_pwm3 = {
.name = "pwm3",
.modes = pmx_pwm3_modes,
.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_ssp1_modes[] = {
{
.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_ssp1 = {
.name = "ssp1",
.modes = pmx_ssp1_modes,
.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_ssp2_modes[] = {
{
.ids = AUTO_NET_SMII_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_ssp2 = {
.name = "ssp2",
.modes = pmx_ssp2_modes,
.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_mii1_modes[] = {
{
.ids = AUTO_NET_MII_MODE,
.mask = 0x0,
},
};
struct pmx_dev spear320_pmx_mii1 = {
.name = "mii1",
.modes = pmx_mii1_modes,
.mode_count = ARRAY_SIZE(pmx_mii1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_smii0_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_smii0 = {
.name = "smii0",
.modes = pmx_smii0_modes,
.mode_count = ARRAY_SIZE(pmx_smii0_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_smii1_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear320_pmx_smii1 = {
.name = "smii1",
.modes = pmx_smii1_modes,
.mode_count = ARRAY_SIZE(pmx_smii1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_i2c1_modes[] = {
{
.ids = AUTO_EXP_MODE,
.mask = 0x0,
},
};
struct pmx_dev spear320_pmx_i2c1 = {
.name = "i2c1",
.modes = pmx_i2c1_modes,
.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
.enb_on_reset = 1,
};
/* pmx driver structure */
static struct pmx_driver pmx_driver = {
.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
......@@ -514,27 +147,6 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
/* padmux devices to enable */
static struct pmx_dev *spear320_evb_pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp,
&spear3xx_pmx_mii,
&spear3xx_pmx_uart0,
/* spear320 specific devices */
&spear320_pmx_fsmc,
&spear320_pmx_sdhci,
&spear320_pmx_i2s,
&spear320_pmx_uart1,
&spear320_pmx_uart2,
&spear320_pmx_can,
&spear320_pmx_pwm0,
&spear320_pmx_pwm1,
&spear320_pmx_pwm2,
&spear320_pmx_mii1,
};
/* DMAC platform data's slave info */
struct pl08x_channel_data spear320_dma_info[] = {
{
......@@ -772,7 +384,7 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
static void __init spear320_dt_init(void)
{
void __iomem *base;
int ret = 0;
int ret;
pl080_plat_data.slave_channels = spear320_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
......@@ -801,19 +413,6 @@ static void __init spear320_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
if (of_machine_is_compatible("st,spear320-evb")) {
/* pmx initialization */
pmx_driver.base = base;
pmx_driver.mode = &spear320_auto_net_mii_mode;
pmx_driver.devs = spear320_evb_pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n",
ret);
}
}
static const char * const spear320_dt_board_compat[] = {
......
......@@ -23,431 +23,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
/* pad multiplexing support */
/* devices */
static struct pmx_dev_mode pmx_firda_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev spear3xx_pmx_firda = {
.name = "firda",
.modes = pmx_firda_modes,
.mode_count = ARRAY_SIZE(pmx_firda_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_i2c_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_I2C_MASK,
},
};
struct pmx_dev spear3xx_pmx_i2c = {
.name = "i2c",
.modes = pmx_i2c_modes,
.mode_count = ARRAY_SIZE(pmx_i2c_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev spear3xx_pmx_ssp_cs = {
.name = "ssp_chip_selects",
.modes = pmx_ssp_cs_modes,
.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_ssp_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_SSP_MASK,
},
};
struct pmx_dev spear3xx_pmx_ssp = {
.name = "ssp",
.modes = pmx_ssp_modes,
.mode_count = ARRAY_SIZE(pmx_ssp_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_mii_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear3xx_pmx_mii = {
.name = "mii",
.modes = pmx_mii_modes,
.mode_count = ARRAY_SIZE(pmx_mii_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN0_MASK,
},
};
struct pmx_dev spear3xx_pmx_gpio_pin0 = {
.name = "gpio_pin0",
.modes = pmx_gpio_pin0_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN1_MASK,
},
};
struct pmx_dev spear3xx_pmx_gpio_pin1 = {
.name = "gpio_pin1",
.modes = pmx_gpio_pin1_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN2_MASK,
},
};
struct pmx_dev spear3xx_pmx_gpio_pin2 = {
.name = "gpio_pin2",
.modes = pmx_gpio_pin2_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN3_MASK,
},
};
struct pmx_dev spear3xx_pmx_gpio_pin3 = {
.name = "gpio_pin3",
.modes = pmx_gpio_pin3_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN4_MASK,
},
};
struct pmx_dev spear3xx_pmx_gpio_pin4 = {
.name = "gpio_pin4",
.modes = pmx_gpio_pin4_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev spear3xx_pmx_gpio_pin5 = {
.name = "gpio_pin5",
.modes = pmx_gpio_pin5_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev spear3xx_pmx_uart0_modem = {
.name = "uart0_modem",
.modes = pmx_uart0_modem_modes,
.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_uart0_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_UART0_MASK,
},
};
struct pmx_dev spear3xx_pmx_uart0 = {
.name = "uart0",
.modes = pmx_uart0_modes,
.mode_count = ARRAY_SIZE(pmx_uart0_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev spear3xx_pmx_timer_3_4 = {
.name = "timer_3_4",
.modes = pmx_timer_3_4_modes,
.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
.enb_on_reset = 0,
};
static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev spear3xx_pmx_timer_1_2 = {
.name = "timer_1_2",
.modes = pmx_timer_1_2_modes,
.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
.enb_on_reset = 0,
};
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* plgpios devices */
static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
{
.ids = 0x00,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
.name = "plgpio 0 and 1",
.modes = pmx_plgpio_0_1_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
{
.ids = 0x00,
.mask = PMX_UART0_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
.name = "plgpio 2 and 3",
.modes = pmx_plgpio_2_3_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
{
.ids = 0x00,
.mask = PMX_I2C_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
.name = "plgpio 4 and 5",
.modes = pmx_plgpio_4_5_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
{
.ids = 0x00,
.mask = PMX_SSP_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
.name = "plgpio 6 to 9",
.modes = pmx_plgpio_6_9_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
{
.ids = 0x00,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
.name = "plgpio 10 to 27",
.modes = pmx_plgpio_10_27_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN0_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_28 = {
.name = "plgpio 28",
.modes = pmx_plgpio_28_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN1_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_29 = {
.name = "plgpio 29",
.modes = pmx_plgpio_29_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN2_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_30 = {
.name = "plgpio 30",
.modes = pmx_plgpio_30_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN3_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_31 = {
.name = "plgpio 31",
.modes = pmx_plgpio_31_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN4_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_32 = {
.name = "plgpio 32",
.modes = pmx_plgpio_32_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_33 = {
.name = "plgpio 33",
.modes = pmx_plgpio_33_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
{
.ids = 0x00,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
.name = "plgpio 34 to 36",
.modes = pmx_plgpio_34_36_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
{
.ids = 0x00,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
.name = "plgpio 37 to 42",
.modes = pmx_plgpio_37_42_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
.name = "plgpio 43, 44, 47 and 48",
.modes = pmx_plgpio_43_44_47_48_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
.enb_on_reset = 1,
};
static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
.name = "plgpio 45, 46, 49 and 50",
.modes = pmx_plgpio_45_46_49_50_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
.enb_on_reset = 1,
};
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
/* ssp device registration */
struct pl022_ssp_controller pl022_plat_data = {
.bus_id = 0,
......
......@@ -5,4 +5,4 @@
# Common support
obj-y := clock.o restart.o time.o pl080.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
/*
* arch/arm/plat-spear/include/plat/padmux.h
*
* SPEAr platform specific gpio pads muxing file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __PLAT_PADMUX_H
#define __PLAT_PADMUX_H
#include <linux/types.h>
/*
* struct pmx_reg: configuration structure for mode reg and mux reg
*
* offset: offset of mode reg
* mask: mask of mode reg
*/
struct pmx_reg {
u32 offset;
u32 mask;
};
/*
* struct pmx_dev_mode: configuration structure every group of modes of a device
*
* ids: all modes for this configuration
* mask: mask for supported mode
*/
struct pmx_dev_mode {
u32 ids;
u32 mask;
};
/*
* struct pmx_mode: mode definition structure
*
* name: mode name
* mask: mode mask
*/
struct pmx_mode {
char *name;
u32 id;
u32 mask;
};
/*
* struct pmx_dev: device definition structure
*
* name: device name
* modes: device configuration array for different modes supported
* mode_count: size of modes array
* is_active: is peripheral active/enabled
* enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
*/
struct pmx_dev {
char *name;
struct pmx_dev_mode *modes;
u8 mode_count;
bool is_active;
bool enb_on_reset;
};
/*
* struct pmx_driver: driver definition structure
*
* mode: mode to be set
* devs: array of pointer to pmx devices
* devs_count: ARRAY_SIZE of devs
* base: base address of soc config registers
* mode_reg: structure of mode config register
* mux_reg: structure of device mux config register
*/
struct pmx_driver {
struct pmx_mode *mode;
struct pmx_dev **devs;
u8 devs_count;
u32 *base;
struct pmx_reg mode_reg;
struct pmx_reg mux_reg;
};
/* pmx functions */
int pmx_register(struct pmx_driver *driver);
#endif /* __PLAT_PADMUX_H */
/*
* arch/arm/plat-spear/include/plat/padmux.c
*
* SPEAr platform specific gpio pads muxing source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <plat/padmux.h>
/*
* struct pmx: pmx definition structure
*
* base: base address of configuration registers
* mode_reg: mode configurations
* mux_reg: muxing configurations
* active_mode: pointer to current active mode
*/
struct pmx {
u32 base;
struct pmx_reg mode_reg;
struct pmx_reg mux_reg;
struct pmx_mode *active_mode;
};
static struct pmx *pmx;
/**
* pmx_mode_set - Enables an multiplexing mode
* @mode - pointer to pmx mode
*
* It will set mode of operation in hardware.
* Returns -ve on Err otherwise 0
*/
static int pmx_mode_set(struct pmx_mode *mode)
{
u32 val;
if (!mode->name)
return -EFAULT;
pmx->active_mode = mode;
val = readl(pmx->base + pmx->mode_reg.offset);
val &= ~pmx->mode_reg.mask;
val |= mode->mask & pmx->mode_reg.mask;
writel(val, pmx->base + pmx->mode_reg.offset);
return 0;
}
/**
* pmx_devs_enable - Enables list of devices
* @devs - pointer to pmx device array
* @count - number of devices to enable
*
* It will enable pads for all required peripherals once and only once.
* If peripheral is not supported by current mode then request is rejected.
* Conflicts between peripherals are not handled and peripherals will be
* enabled in the order they are present in pmx_dev array.
* In case of conflicts last peripheral enabled will be present.
* Returns -ve on Err otherwise 0
*/
static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
{
u32 val, i, mask;
if (!count)
return -EINVAL;
val = readl(pmx->base + pmx->mux_reg.offset);
for (i = 0; i < count; i++) {
u8 j = 0;
if (!devs[i]->name || !devs[i]->modes) {
printk(KERN_ERR "padmux: dev name or modes is null\n");
continue;
}
/* check if peripheral exists in active mode */
if (pmx->active_mode) {
bool found = false;
for (j = 0; j < devs[i]->mode_count; j++) {
if (devs[i]->modes[j].ids &
pmx->active_mode->id) {
found = true;
break;
}
}
if (found == false) {
printk(KERN_ERR "%s device not available in %s"\
"mode\n", devs[i]->name,
pmx->active_mode->name);
continue;
}
}
/* enable peripheral */
mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
if (devs[i]->enb_on_reset)
val &= ~mask;
else
val |= mask;
devs[i]->is_active = true;
}
writel(val, pmx->base + pmx->mux_reg.offset);
kfree(pmx);
/* this will ensure that multiplexing can't be changed now */
pmx = (struct pmx *)-1;
return 0;
}
/**
* pmx_register - registers a platform requesting pad mux feature
* @driver - pointer to driver structure containing driver specific parameters
*
* Also this must be called only once. This will allocate memory for pmx
* structure, will call pmx_mode_set, will call pmx_devs_enable.
* Returns -ve on Err otherwise 0
*/
int pmx_register(struct pmx_driver *driver)
{
int ret = 0;
if (pmx)
return -EPERM;
if (!driver->base || !driver->devs)
return -EFAULT;
pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
if (!pmx)
return -ENOMEM;
pmx->base = (u32)driver->base;
pmx->mode_reg.offset = driver->mode_reg.offset;
pmx->mode_reg.mask = driver->mode_reg.mask;
pmx->mux_reg.offset = driver->mux_reg.offset;
pmx->mux_reg.mask = driver->mux_reg.mask;
/* choose mode to enable */
if (driver->mode) {
ret = pmx_mode_set(driver->mode);
if (ret)
goto pmx_fail;
}
ret = pmx_devs_enable(driver->devs, driver->devs_count);
if (ret)
goto pmx_fail;
return 0;
pmx_fail:
return ret;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment