Merge branch 'clean/late_initcall_v2' of...

Merge branch 'clean/late_initcall_v2' of git://git.linaro.org/people/shawnguo/linux-2.6 into staging/cleanup

By Shawn Guo
via Shawn Guo
* 'clean/late_initcall_v2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: ux500: use machine specific hook for late init
  ARM: tegra: use machine specific hook for late init
  ARM: shmobile: use machine specific hook for late init
  ARM: sa1100: use machine specific hook for late init
  ARM: s3c64xx: use machine specific hook for late init
  ARM: prima2: use machine specific hook for late init
  ARM: pnx4008: use machine specific hook for late init
  ARM: omap2: use machine specific hook for late init
  ARM: omap1: use machine specific hook for late init
  ARM: msm: use machine specific hook for late init
  ARM: imx: use machine specific hook for late init
  ARM: exynos: use machine specific hook for late init
  ARM: ep93xx: use machine specific hook for late init
  ARM: davinci: use machine specific hook for late init
  ARM: provide a late_initcall hook for platform initialization

arch/arm/include/asm/mach/arch.h

@@ -43,6 +43,7 @@ struct machine_desc {
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
 	void			(*init_machine)(void);
+	void			(*init_late)(void);
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif

arch/arm/kernel/setup.c

@@ -800,6 +800,14 @@ static int __init customize_machine(void)
 }
 arch_initcall(customize_machine);
 
+static int __init init_machine_late(void)
+{
+	if (machine_desc->init_late)
+		machine_desc->init_late();
+	return 0;
+}
+late_initcall(init_machine_late);
+
 #ifdef CONFIG_KEXEC
 static inline unsigned long long get_total_mem(void)
 {

arch/arm/mach-davinci/board-da830-evm.c

@@ -681,6 +681,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-da850-evm.c

@@ -1411,6 +1411,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-evm.c

@@ -357,6 +357,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -276,6 +276,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm365-evm.c

@@ -618,6 +618,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -825,6 +825,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -788,6 +788,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
@@ -798,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-mityomapl138.c

@@ -572,6 +572,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= mityomapl138_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -278,6 +278,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -343,6 +343,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= omapl138_hawk_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-sffsdr.c

@@ -157,6 +157,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-tnetv107x-evm.c

@@ -282,6 +282,7 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= tnetv107x_evm_board_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= tnetv107x_restart,
 MACHINE_END

arch/arm/mach-davinci/clock.c

@@ -213,7 +213,7 @@ EXPORT_SYMBOL(clk_unregister);
 /*
  * Disable any unused clocks left on by the bootloader
  */
-static int __init clk_disable_unused(void)
+int __init davinci_clk_disable_unused(void)
 {
 	struct clk *ck;
 
@@ -237,7 +237,6 @@ static int __init clk_disable_unused(void)
 
 	return 0;
 }
-late_initcall(clk_disable_unused);
 #endif
 
 static unsigned long clk_sysclk_recalc(struct clk *clk)

arch/arm/mach-davinci/common.c

@@ -117,3 +117,10 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 err:
 	panic("davinci_common_init: SoC Initialization failed\n");
 }
+
+void __init davinci_init_late(void)
+{
+	davinci_cpufreq_init();
+	davinci_pm_init();
+	davinci_clk_disable_unused();
+}

arch/arm/mach-davinci/cpufreq.c

@@ -240,10 +240,9 @@ static struct platform_driver davinci_cpufreq_driver = {
 	.remove = __exit_p(davinci_cpufreq_remove),
 };
 
-static int __init davinci_cpufreq_init(void)
+int __init davinci_cpufreq_init(void)
 {
 	return platform_driver_probe(&davinci_cpufreq_driver,
 							davinci_cpufreq_probe);
 }
-late_initcall(davinci_cpufreq_init);
 

arch/arm/mach-davinci/include/mach/common.h

@@ -84,6 +84,25 @@ extern struct davinci_soc_info davinci_soc_info;
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
 void davinci_restart(char mode, const char *cmd);
+void davinci_init_late(void);
+
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+int davinci_clk_disable_unused(void);
+#else
+static inline int davinci_clk_disable_unused(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+int davinci_cpufreq_init(void);
+#else
+static inline int davinci_cpufreq_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_SUSPEND
+int davinci_pm_init(void);
+#else
+static inline int davinci_pm_init(void) { return 0; }
+#endif
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000

arch/arm/mach-davinci/pm.c

@@ -152,8 +152,7 @@ static struct platform_driver davinci_pm_driver = {
 	.remove = __exit_p(davinci_pm_remove),
 };
 
-static int __init davinci_pm_init(void)
+int __init davinci_pm_init(void)
 {
 	return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
 }
-late_initcall(davinci_pm_init);

arch/arm/mach-ep93xx/adssphere.c

@@ -41,5 +41,6 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/core.c

@@ -904,3 +904,8 @@ void ep93xx_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+void __init ep93xx_init_late(void)
+{
+	crunch_init();
+}

arch/arm/mach-ep93xx/crunch.c

@@ -79,12 +79,10 @@ static struct notifier_block crunch_notifier_block = {
 	.notifier_call	= crunch_do,
 };
 
-static int __init crunch_init(void)
+int __init crunch_init(void)
 {
 	thread_register_notifier(&crunch_notifier_block);
 	elf_hwcap |= HWCAP_CRUNCH;
 
 	return 0;
 }
-
-late_initcall(crunch_init);

arch/arm/mach-ep93xx/edb93xx.c

@@ -255,6 +255,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -268,6 +269,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -281,6 +283,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -294,6 +297,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -307,6 +311,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -320,6 +325,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -333,6 +339,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -346,6 +353,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-ep93xx/gesbc9312.c

@@ -41,5 +41,6 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -53,5 +53,12 @@ void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
 void ep93xx_restart(char, const char *);
+void ep93xx_init_late(void);
+
+#ifdef CONFIG_CRUNCH
+int crunch_init(void);
+#else
+static inline int crunch_init(void) { return 0; }
+#endif
 
 #endif

arch/arm/mach-ep93xx/micro9.c

@@ -85,6 +85,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -98,6 +99,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -111,6 +113,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -124,6 +127,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-ep93xx/simone.c

@@ -86,5 +86,6 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= simone_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/snappercl15.c

@@ -183,5 +183,6 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.handle_irq	= vic_handle_irq,
 	.timer 		= &ep93xx_timer,
 	.init_machine	= snappercl15_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/ts72xx.c

@@ -252,5 +252,6 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= ts72xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -367,5 +367,6 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-exynos/common.c

@@ -285,6 +285,11 @@ void exynos5_restart(char mode, const char *cmd)
 	__raw_writel(0x1, EXYNOS_SWRESET);
 }
 
+void __init exynos_init_late(void)
+{
+	exynos_pm_late_initcall();
+}
+
 /*
  * exynos_map_io
  *

arch/arm/mach-exynos/common.h

@@ -19,6 +19,13 @@ void exynos4_init_irq(void);
 void exynos5_init_irq(void);
 void exynos4_restart(char mode, const char *cmd);
 void exynos5_restart(char mode, const char *cmd);
+void exynos_init_late(void);
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+int exynos_pm_late_initcall(void);
+#else
+static int exynos_pm_late_initcall(void) { return 0; }
+#endif
 
 #ifdef CONFIG_ARCH_EXYNOS4
 void exynos4_register_clocks(void);

arch/arm/mach-exynos/mach-armlex4210.c

@@ -214,6 +214,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -83,6 +83,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4210_dt_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4210_dt_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos4210_dt_compat,
 	.restart        = exynos4_restart,

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -72,6 +72,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5250_dt_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos5250_dt_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos5250_dt_compat,
 	.restart        = exynos5_restart,

arch/arm/mach-exynos/mach-nuri.c

@@ -1351,6 +1351,7 @@ MACHINE_START(NURI, "NURI")
 	.map_io		= nuri_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,

arch/arm/mach-exynos/mach-origen.c

@@ -735,6 +735,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
 	.restart	= exynos4_restart,

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -303,6 +303,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.map_io		= smdk4x12_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-smdkv310.c

@@ -393,6 +393,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.map_io		= smdkv310_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-universal_c210.c

@@ -1113,6 +1113,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,

arch/arm/mach-exynos/pm_domains.c

@@ -193,9 +193,8 @@ static __init int exynos4_pm_init_power_domain(void)
 }
 arch_initcall(exynos4_pm_init_power_domain);
 
-static __init int exynos_pm_late_initcall(void)
+int __init exynos_pm_late_initcall(void)
 {
 	pm_genpd_poweroff_unused();
 	return 0;
 }
-late_initcall(exynos_pm_late_initcall);

arch/arm/mach-imx/cpu-imx5.c

@@ -62,11 +62,8 @@ EXPORT_SYMBOL(mx51_revision);
  * Dependent on link order - so the assumption is that vfp_init is called
  * before us.
  */
-static int __init mx51_neon_fixup(void)
+int __init mx51_neon_fixup(void)
 {
-	if (!cpu_is_mx51())
-		return 0;
-
 	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
 			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
@@ -75,7 +72,6 @@ static int __init mx51_neon_fixup(void)
 	return 0;
 }
 
-late_initcall(mx51_neon_fixup);
 #endif
 
 static int get_mx53_srev(void)

arch/arm/mach-imx/imx51-dt.c

@@ -115,6 +115,7 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.handle_irq	= imx51_handle_irq,
 	.timer		= &imx51_timer,
 	.init_machine	= imx51_dt_init,
+	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx51.c

@@ -297,5 +297,6 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx51sd.c

@@ -335,5 +335,6 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx51_3ds.c

@@ -175,5 +175,6 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx51_babbage.c

@@ -426,5 +426,6 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx51_efikamx.c

@@ -207,29 +207,32 @@ static void mx51_efikamx_power_off(void)
 
 static int __init mx51_efikamx_power_init(void)
 {
-	if (machine_is_mx51_efikamx()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKAMX_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikamx_power_off;
-
-		/* enable coincell charger. maybe need a small power driver ? */
-		coincell = regulator_get(NULL, "coincell");
-		if (!IS_ERR(coincell)) {
-			regulator_set_voltage(coincell, 3000000, 3000000);
-			regulator_enable(coincell);
-		}
-
-		regulator_has_full_constraints();
+	pwgt1 = regulator_get(NULL, "pwgt1");
+	pwgt2 = regulator_get(NULL, "pwgt2");
+	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+		regulator_enable(pwgt1);
+		regulator_enable(pwgt2);
+	}
+	gpio_request(EFIKAMX_POWEROFF, "poweroff");
+	pm_power_off = mx51_efikamx_power_off;
+
+	/* enable coincell charger. maybe need a small power driver ? */
+	coincell = regulator_get(NULL, "coincell");
+	if (!IS_ERR(coincell)) {
+		regulator_set_voltage(coincell, 3000000, 3000000);
+		regulator_enable(coincell);
 	}
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
-late_initcall(mx51_efikamx_power_init);
+
+static void __init mx51_efikamx_init_late(void)
+{
+	imx51_init_late();
+	mx51_efikamx_power_init();
+}
 
 static void __init mx51_efikamx_init(void)
 {
@@ -293,5 +296,6 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
+	.init_late = mx51_efikamx_init_late,
 	.restart = mx51_efikamx_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx51_efikasb.c

@@ -211,22 +211,25 @@ static void mx51_efikasb_power_off(void)
 
 static int __init mx51_efikasb_power_init(void)
 {
-	if (machine_is_mx51_efikasb()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKASB_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikasb_power_off;
-
-		regulator_has_full_constraints();
+	pwgt1 = regulator_get(NULL, "pwgt1");
+	pwgt2 = regulator_get(NULL, "pwgt2");
+	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+		regulator_enable(pwgt1);
+		regulator_enable(pwgt2);
 	}
+	gpio_request(EFIKASB_POWEROFF, "poweroff");
+	pm_power_off = mx51_efikasb_power_off;
+
+	regulator_has_full_constraints();
 
 	return 0;
 }
-late_initcall(mx51_efikasb_power_init);
+
+static void __init mx51_efikasb_init_late(void)
+{
+	imx51_init_late();
+	mx51_efikasb_power_init();
+}
 
 /* 01     R1.3 board
    10     R2.0 board */
@@ -287,6 +290,7 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
 	.init_irq = mx51_init_irq,
 	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
+	.init_late = mx51_efikasb_init_late,
 	.timer = &mx51_efikasb_timer,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037.c

@@ -694,6 +694,11 @@ static void __init pcm037_reserve(void)
 			MX3_CAMERA_BUF_SIZE);
 }
 
+static void __init pcm037_init_late(void)
+{
+	pcm037_eet_init_devices();
+}
+
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.atag_offset = 0x100,
@@ -704,5 +709,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.handle_irq = imx31_handle_irq,
 	.timer = &pcm037_timer,
 	.init_machine = pcm037_init,
+	.init_late = pcm037_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037_eet.c

@@ -160,9 +160,9 @@ static const struct gpio_keys_platform_data
 	.rep		= 0, /* No auto-repeat */
 };
 
-static int __init eet_init_devices(void)
+int __init pcm037_eet_init_devices(void)
 {
-	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+	if (pcm037_variant() != PCM037_EET)
 		return 0;
 
 	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
@@ -176,4 +176,3 @@ static int __init eet_init_devices(void)
 
 	return 0;
 }
-late_initcall(eet_init_devices);

arch/arm/mach-imx/mm-imx5.c

@@ -234,3 +234,8 @@ void __init imx53_soc_init(void)
 	platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
 					ARRAY_SIZE(imx53_audmux_res));
 }
+
+void __init imx51_init_late(void)
+{
+	mx51_neon_fixup();
+}

arch/arm/mach-imx/pcm037.h

@@ -8,4 +8,10 @@ enum pcm037_board_variant {
 
 extern enum pcm037_board_variant pcm037_variant(void);
 
+#ifdef CONFIG_MACH_PCM037_EET
+int pcm037_eet_init_devices(void);
+#else
+static inline int pcm037_eet_init_devices(void) { return 0; }
+#endif
+
 #endif

arch/arm/mach-msm/board-halibut.c

@@ -94,6 +94,11 @@ static void __init halibut_map_io(void)
 	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
+static void __init halibut_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 	.atag_offset	= 0x100,
 	.fixup		= halibut_fixup,
@@ -101,5 +106,6 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 	.init_early	= halibut_init_early,
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
+	.init_late	= halibut_init_late,
 	.timer		= &msm_timer,
 MACHINE_END

arch/arm/mach-msm/board-mahimahi.c

@@ -71,6 +71,11 @@ static void __init mahimahi_map_io(void)
 	msm_clock_init();
 }
 
+static void __init mahimahi_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
@@ -79,5 +84,6 @@ MACHINE_START(MAHIMAHI, "mahimahi")
 	.map_io		= mahimahi_map_io,
 	.init_irq	= msm_init_irq,
 	.init_machine	= mahimahi_init,
+	.init_late	= mahimahi_init_late,
 	.timer		= &msm_timer,
 MACHINE_END

arch/arm/mach-msm/board-msm7x27.c

@@ -128,11 +128,17 @@ static void __init msm7x2x_map_io(void)
 #endif
 }
 
+static void __init msm7x2x_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
 
@@ -141,6 +147,7 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
 
@@ -149,6 +156,7 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
 
@@ -157,5 +165,6 @@ MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END

arch/arm/mach-msm/board-msm7x30.c

@@ -120,6 +120,11 @@ static void __init msm7x30_map_io(void)
 	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
 }
 
+static void __init msm7x30_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 	.atag_offset = 0x100,
 	.fixup = msm7x30_fixup,
@@ -127,6 +132,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
+	.init_late = msm7x30_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -137,6 +143,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
+	.init_late = msm7x30_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -147,5 +154,6 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
+	.init_late = msm7x30_init_late,
 	.timer = &msm_timer,
 MACHINE_END

arch/arm/mach-msm/board-msm8960.c

@@ -93,6 +93,11 @@ static void __init msm8960_rumi3_init(void)
 	platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
 }
 
+static void __init msm8960_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
 	.fixup = msm8960_fixup,
 	.reserve = msm8960_reserve,
@@ -101,6 +106,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
 	.timer = &msm_timer,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_sim_init,
+	.init_late = msm8960_init_late,
 MACHINE_END
 
 MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
@@ -111,5 +117,6 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
 	.timer = &msm_timer,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_rumi3_init,
+	.init_late = msm8960_init_late,
 MACHINE_END
 

arch/arm/mach-msm/board-msm8x60.c

@@ -81,6 +81,11 @@ static void __init msm8x60_init(void)
 {
 }
 
+static void __init msm8x60_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 #ifdef CONFIG_OF
 static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
@@ -111,6 +116,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -121,6 +127,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -131,6 +138,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -141,6 +149,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -150,6 +159,7 @@ DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
 	.init_machine = msm8x60_dt_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 	.dt_compat = msm8x60_fluid_match,
 MACHINE_END

arch/arm/mach-msm/board-qsd8x50.c

@@ -191,11 +191,17 @@ static void __init qsd8x50_init(void)
 	qsd8x50_init_mmc();
 }
 
+static void __init qsd8x50_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 	.atag_offset = 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
+	.init_late = qsd8x50_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -204,5 +210,6 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
+	.init_late = qsd8x50_init_late,
 	.timer = &msm_timer,
 MACHINE_END

arch/arm/mach-msm/board-sapphire.c

@@ -101,6 +101,11 @@ static void __init sapphire_map_io(void)
 	msm_clock_init();
 }
 
+static void __init sapphire_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
 	.atag_offset    = 0x100,
@@ -108,5 +113,6 @@ MACHINE_START(SAPPHIRE, "sapphire")
 	.map_io         = sapphire_map_io,
 	.init_irq       = sapphire_init_irq,
 	.init_machine   = sapphire_init,
+	.init_late      = sapphire_init_late,
 	.timer          = &msm_timer,
 MACHINE_END

arch/arm/mach-msm/board-trout.c

@@ -98,6 +98,11 @@ static void __init trout_map_io(void)
 	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
+static void __init trout_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(TROUT, "HTC Dream")
 	.atag_offset	= 0x100,
 	.fixup		= trout_fixup,
@@ -105,5 +110,6 @@ MACHINE_START(TROUT, "HTC Dream")
 	.init_early	= trout_init_early,
 	.init_irq	= trout_init_irq,
 	.init_machine	= trout_init,
+	.init_late	= trout_init_late,
 	.timer		= &msm_timer,
 MACHINE_END

arch/arm/mach-msm/include/mach/board.h

@@ -47,4 +47,10 @@ int __init msm_add_sdcc(unsigned int controller,
 			struct msm_mmc_platform_data *plat,
 			unsigned int stat_irq, unsigned long stat_irq_flags);
 
+#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
+int smd_debugfs_init(void);
+#else
+static inline int smd_debugfs_init(void) { return 0; }
+#endif
+
 #endif

arch/arm/mach-msm/smd_debug.c

@@ -216,7 +216,7 @@ static void debug_create(const char *name, umode_t mode,
 	debugfs_create_file(name, mode, dent, fill, &debug_ops);
 }
 
-static int smd_debugfs_init(void)
+int __init smd_debugfs_init(void)
 {
 	struct dentry *dent;
 
@@ -234,7 +234,6 @@ static int smd_debugfs_init(void)
 	return 0;
 }
 
-late_initcall(smd_debugfs_init);
 #endif
 
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -595,7 +595,12 @@ static int __init late_init(void)
 	gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
 	return err;
 }
-late_initcall(late_init);
+
+static void __init ams_delta_init_late(void)
+{
+	omap1_init_late();
+	late_init();
+}
 
 static void __init ams_delta_map_io(void)
 {
@@ -611,6 +616,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
+	.init_late	= ams_delta_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-fsample.c

@@ -383,6 +383,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-generic.c

@@ -88,6 +88,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-h2.c

@@ -446,6 +446,7 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-h3.c

@@ -439,6 +439,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-htcherald.c

@@ -605,6 +605,7 @@ MACHINE_START(HERALD, "HTC Herald")
 	.reserve	= omap_reserve,
 	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
+	.init_late	= omap1_init_late,
 	.timer          = &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-innovator.c

@@ -457,6 +457,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-nokia770.c

@@ -255,6 +255,7 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-osk.c

@@ -574,6 +574,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-palmte.c

@@ -267,6 +267,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-palmtt.c

@@ -313,6 +313,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-palmz71.c

@@ -330,6 +330,7 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-perseus2.c

@@ -345,6 +345,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-sx1.c

@@ -407,6 +407,7 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END

arch/arm/mach-omap1/board-voiceblue.c

@@ -294,6 +294,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= voiceblue_restart,
 MACHINE_END

arch/arm/mach-omap1/common.h

@@ -52,8 +52,18 @@ static inline void omap16xx_map_io(void)
 }
 #endif
 
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+int omap_serial_wakeup_init(void);
+#else
+static inline int omap_serial_wakeup_init(void)
+{
+	return 0;
+}
+#endif
+
 void omap1_init_early(void);
 void omap1_init_irq(void);
+void omap1_init_late(void);
 void omap1_restart(char, const char *);
 
 extern struct sys_timer omap1_timer;

arch/arm/mach-omap1/io.c

@@ -138,6 +138,11 @@ void __init omap1_init_early(void)
 	omap_init_consistent_dma_size();
 }
 
+void __init omap1_init_late(void)
+{
+	omap_serial_wakeup_init();
+}
+
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */

arch/arm/mach-omap1/serial.c

@@ -237,7 +237,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
 	enable_irq_wake(gpio_to_irq(gpio_nr));
 }
 
-static int __init omap_serial_wakeup_init(void)
+int __init omap_serial_wakeup_init(void)
 {
 	if (!cpu_is_omap16xx())
 		return 0;
@@ -251,7 +251,6 @@ static int __init omap_serial_wakeup_init(void)
 
 	return 0;
 }
-late_initcall(omap_serial_wakeup_init);
 
 #endif	/* CONFIG_OMAP_SERIAL_WAKE */
 

arch/arm/mach-omap2/board-2430sdp.c

@@ -303,6 +303,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_2430sdp_init,
+	.init_late	= omap2430_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -635,6 +635,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_3430sdp_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -217,6 +217,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_sdp_init,
+	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -969,6 +969,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.init_irq	= gic_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_4430sdp_init,
+	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -100,6 +100,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
+	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -402,6 +402,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
+	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -356,6 +356,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_apollon_init,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -686,6 +686,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t35_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -698,6 +699,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.init_irq       = omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine   = cm_t3730_init,
+	.init_late     = omap3630_init_late,
 	.timer          = &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -303,6 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
+	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -664,6 +664,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_secure_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -158,6 +158,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.init_irq	= omap_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_init,
+	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
 	.restart	= omap_prcm_restart,

arch/arm/mach-omap2/board-h4.c

@@ -398,6 +398,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_h4_init,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -684,6 +684,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -696,6 +697,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -442,6 +442,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_ldp_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -694,6 +694,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -706,6 +707,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -718,6 +720,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -565,6 +565,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_beagle_init,
+	.init_late	= omap3_init_late,
 	.timer		= &omap3_secure_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -692,6 +692,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_evm_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3logic.c

@@ -218,6 +218,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -230,6 +231,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END