Commit 80caf7d2 authored by Huang Rui's avatar Huang Rui Committed by Felipe Balbi

usb: dwc3: add lpm erratum support

When parameter DWC_USB3_LPM_ERRATA_ENABLE is enabled in Andvanced
Configuration of coreConsultant, it supports of xHCI BESL Errata Dated
10/19/2011 is enabled in host mode. In device mode it adds the capability
to send NYET response threshold based on the BESL value received in the LPM
token, and the threhold is configurable for each soc platform.

This patch adds an entry that soc platform is able to define the lpm
capacity with their own device tree or bus glue layer.

[ balbi@ti.com : added devicetree documentation, spelled threshold
		completely, made sure threshold is only applied to
		proper core revisions. ]
Signed-off-by: default avatarHuang Rui <ray.huang@amd.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 3b81221a
...@@ -16,6 +16,8 @@ Optional properties: ...@@ -16,6 +16,8 @@ Optional properties:
- tx-fifo-resize: determines if the FIFO *has* to be reallocated. - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- snps,disable_scramble_quirk: true when SW should disable data scrambling. - snps,disable_scramble_quirk: true when SW should disable data scrambling.
Only really useful for FPGA builds. Only really useful for FPGA builds.
- snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
- snps,lpm-nyet-threshold: LPM NYET threshold
This is usually a subnode to DWC3 glue to which it is connected. This is usually a subnode to DWC3 glue to which it is connected.
......
...@@ -657,6 +657,7 @@ static int dwc3_probe(struct platform_device *pdev) ...@@ -657,6 +657,7 @@ static int dwc3_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node; struct device_node *node = dev->of_node;
struct resource *res; struct resource *res;
struct dwc3 *dwc; struct dwc3 *dwc;
u8 lpm_nyet_threshold;
int ret; int ret;
...@@ -712,16 +713,27 @@ static int dwc3_probe(struct platform_device *pdev) ...@@ -712,16 +713,27 @@ static int dwc3_probe(struct platform_device *pdev)
*/ */
res->start -= DWC3_GLOBALS_REGS_START; res->start -= DWC3_GLOBALS_REGS_START;
/* default to highest possible threshold */
lpm_nyet_threshold = 0xff;
if (node) { if (node) {
dwc->maximum_speed = of_usb_get_maximum_speed(node); dwc->maximum_speed = of_usb_get_maximum_speed(node);
dwc->has_lpm_erratum = of_property_read_bool(node,
"snps,has-lpm-erratum");
of_property_read_u8(node, "snps,lpm-nyet-threshold",
&lpm_nyet_threshold);
dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); dwc->needs_fifo_resize = of_property_read_bool(node,
"tx-fifo-resize");
dwc->dr_mode = of_usb_get_dr_mode(node); dwc->dr_mode = of_usb_get_dr_mode(node);
dwc->disable_scramble_quirk = of_property_read_bool(node, dwc->disable_scramble_quirk = of_property_read_bool(node,
"snps,disable_scramble_quirk"); "snps,disable_scramble_quirk");
} else if (pdata) { } else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed; dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
if (pdata->lpm_nyet_threshold)
lpm_nyet_threshold = pdata->lpm_nyet_threshold;
dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->needs_fifo_resize = pdata->tx_fifo_resize;
dwc->dr_mode = pdata->dr_mode; dwc->dr_mode = pdata->dr_mode;
...@@ -733,6 +745,8 @@ static int dwc3_probe(struct platform_device *pdev) ...@@ -733,6 +745,8 @@ static int dwc3_probe(struct platform_device *pdev)
if (dwc->maximum_speed == USB_SPEED_UNKNOWN) if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
dwc->maximum_speed = USB_SPEED_SUPER; dwc->maximum_speed = USB_SPEED_SUPER;
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
ret = dwc3_core_get_phy(dwc); ret = dwc3_core_get_phy(dwc);
if (ret) if (ret)
return ret; return ret;
......
...@@ -246,16 +246,19 @@ ...@@ -246,16 +246,19 @@
#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
/* These apply for core versions 1.94a and later */ /* These apply for core versions 1.94a and later */
#define DWC3_DCTL_KEEP_CONNECT (1 << 19) #define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
#define DWC3_DCTL_L1_HIBER_EN (1 << 18) #define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)
#define DWC3_DCTL_CRS (1 << 17)
#define DWC3_DCTL_CSS (1 << 16)
#define DWC3_DCTL_INITU2ENA (1 << 12) #define DWC3_DCTL_KEEP_CONNECT (1 << 19)
#define DWC3_DCTL_ACCEPTU2ENA (1 << 11) #define DWC3_DCTL_L1_HIBER_EN (1 << 18)
#define DWC3_DCTL_INITU1ENA (1 << 10) #define DWC3_DCTL_CRS (1 << 17)
#define DWC3_DCTL_ACCEPTU1ENA (1 << 9) #define DWC3_DCTL_CSS (1 << 16)
#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
#define DWC3_DCTL_INITU2ENA (1 << 12)
#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
#define DWC3_DCTL_INITU1ENA (1 << 10)
#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5) #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK) #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
...@@ -660,10 +663,13 @@ struct dwc3_scratchpad_array { ...@@ -660,10 +663,13 @@ struct dwc3_scratchpad_array {
* @regset: debugfs pointer to regdump file * @regset: debugfs pointer to regdump file
* @test_mode: true when we're entering a USB test mode * @test_mode: true when we're entering a USB test mode
* @test_mode_nr: test feature selector * @test_mode_nr: test feature selector
* @lpm_nyet_threshold: LPM NYET response threshold
* @delayed_status: true when gadget driver asks for delayed status * @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer * @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer * @ep0_expect_in: true when we expect a DATA IN transfer
* @has_hibernation: true when dwc3 was configured with Hibernation * @has_hibernation: true when dwc3 was configured with Hibernation
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_selfpowered: true when we are selfpowered * @is_selfpowered: true when we are selfpowered
* @is_fpga: true when we are using the FPGA board * @is_fpga: true when we are using the FPGA board
* @needs_fifo_resize: not all users might want fifo resizing, flag it * @needs_fifo_resize: not all users might want fifo resizing, flag it
...@@ -764,11 +770,13 @@ struct dwc3 { ...@@ -764,11 +770,13 @@ struct dwc3 {
u8 test_mode; u8 test_mode;
u8 test_mode_nr; u8 test_mode_nr;
u8 lpm_nyet_threshold;
unsigned delayed_status:1; unsigned delayed_status:1;
unsigned ep0_bounced:1; unsigned ep0_bounced:1;
unsigned ep0_expect_in:1; unsigned ep0_expect_in:1;
unsigned has_hibernation:1; unsigned has_hibernation:1;
unsigned has_lpm_erratum:1;
unsigned is_selfpowered:1; unsigned is_selfpowered:1;
unsigned is_fpga:1; unsigned is_fpga:1;
unsigned needs_fifo_resize:1; unsigned needs_fifo_resize:1;
......
...@@ -2301,6 +2301,19 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) ...@@ -2301,6 +2301,19 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
*/ */
reg |= DWC3_DCTL_HIRD_THRES(12); reg |= DWC3_DCTL_HIRD_THRES(12);
/*
* When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
* DCFG.LPMCap is set, core responses with an ACK and the
* BESL value in the LPM token is less than or equal to LPM
* NYET threshold.
*/
WARN_ONCE(dwc->revision < DWC3_REVISION_240A
&& dwc->has_lpm_erratum,
"LPM Erratum not available on dwc3 revisisions < 2.40a\n");
if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc3_writel(dwc->regs, DWC3_DCTL, reg);
} else { } else {
reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg = dwc3_readl(dwc->regs, DWC3_DCTL);
......
...@@ -25,5 +25,8 @@ struct dwc3_platform_data { ...@@ -25,5 +25,8 @@ struct dwc3_platform_data {
enum usb_dr_mode dr_mode; enum usb_dr_mode dr_mode;
bool tx_fifo_resize; bool tx_fifo_resize;
u8 lpm_nyet_threshold;
unsigned disable_scramble_quirk:1; unsigned disable_scramble_quirk:1;
unsigned has_lpm_erratum:1;
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment