powerpc/pseries/iommu: Update call to ibm, query-pe-dma-windows

>From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
outputs from "ibm,query-pe-dma-windows" go from 5 to 6.

This change of output size is meant to expand the address size of
largest_available_block PE TCE from 32-bit to 64-bit, which ends up
shifting page_size and migration_capable.

This ends up requiring the update of
ddw_query_response->largest_available_block from u32 to u64, and manually
assigning the values from the buffer into this struct, according to
output size.

Also, a routine was created for helping reading the ddw extensions as
suggested by LoPAR: First reading the size of the extension array from
index 0, checking if the property exists, and then returning it's value.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-3-leobras.c@gmail.com

arch/powerpc/platforms/pseries/iommu.c

@@ -47,6 +47,12 @@ enum {
 	DDW_APPLICABLE_SIZE
 };
 
+enum {
+	DDW_EXT_SIZE = 0,
+	DDW_EXT_RESET_DMA_WIN = 1,
+	DDW_EXT_QUERY_OUT_SIZE = 2
+};
+
 static struct iommu_table_group *iommu_pseries_alloc_group(int node)
 {
 	struct iommu_table_group *table_group;
@@ -342,7 +348,7 @@ struct direct_window {
 /* Dynamic DMA Window support */
 struct ddw_query_response {
 	u32 windows_available;
-	u32 largest_available_block;
+	u64 largest_available_block;
 	u32 page_size;
 	u32 migration_capable;
 };
@@ -877,14 +883,62 @@ static int find_existing_ddw_windows(void)
 }
 machine_arch_initcall(pseries, find_existing_ddw_windows);
 
+/**
+ * ddw_read_ext - Get the value of an DDW extension
+ * @np:		device node from which the extension value is to be read.
+ * @extnum:	index number of the extension.
+ * @value:	pointer to return value, modified when extension is available.
+ *
+ * Checks if "ibm,ddw-extensions" exists for this node, and get the value
+ * on index 'extnum'.
+ * It can be used only to check if a property exists, passing value == NULL.
+ *
+ * Returns:
+ *	0 if extension successfully read
+ *	-EINVAL if the "ibm,ddw-extensions" does not exist,
+ *	-ENODATA if "ibm,ddw-extensions" does not have a value, and
+ *	-EOVERFLOW if "ibm,ddw-extensions" does not contain this extension.
+ */
+static inline int ddw_read_ext(const struct device_node *np, int extnum,
+			       u32 *value)
+{
+	static const char propname[] = "ibm,ddw-extensions";
+	u32 count;
+	int ret;
+
+	ret = of_property_read_u32_index(np, propname, DDW_EXT_SIZE, &count);
+	if (ret)
+		return ret;
+
+	if (count < extnum)
+		return -EOVERFLOW;
+
+	if (!value)
+		value = &count;
+
+	return of_property_read_u32_index(np, propname, extnum, value);
+}
+
 static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
-			struct ddw_query_response *query)
+		     struct ddw_query_response *query,
+		     struct device_node *parent)
 {
 	struct device_node *dn;
 	struct pci_dn *pdn;
-	u32 cfg_addr;
+	u32 cfg_addr, ext_query, query_out[5];
 	u64 buid;
-	int ret;
+	int ret, out_sz;
+
+	/*
+	 * From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can rule how many
+	 * output parameters ibm,query-pe-dma-windows will have, ranging from
+	 * 5 to 6.
+	 */
+	ret = ddw_read_ext(parent, DDW_EXT_QUERY_OUT_SIZE, &ext_query);
+	if (!ret && ext_query == 1)
+		out_sz = 6;
+	else
+		out_sz = 5;
 
 	/*
 	 * Get the config address and phb buid of the PE window.
@@ -897,11 +951,28 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
 	buid = pdn->phb->buid;
 	cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
 
-	ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, 5, (u32 *)query,
+	ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, out_sz, query_out,
 			cfg_addr, BUID_HI(buid), BUID_LO(buid));
-	dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
-		" returned %d\n", ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr,
-		 BUID_HI(buid), BUID_LO(buid), ret);
+	dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x returned %d\n",
+		 ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr, BUID_HI(buid),
+		 BUID_LO(buid), ret);
+
+	switch (out_sz) {
+	case 5:
+		query->windows_available = query_out[0];
+		query->largest_available_block = query_out[1];
+		query->page_size = query_out[2];
+		query->migration_capable = query_out[3];
+		break;
+	case 6:
+		query->windows_available = query_out[0];
+		query->largest_available_block = ((u64)query_out[1] << 32) |
+						 query_out[2];
+		query->page_size = query_out[3];
+		query->migration_capable = query_out[4];
+		break;
+	}
+
 	return ret;
 }
 
@@ -1049,7 +1120,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	 * of page sizes: supported and supported for migrate-dma.
 	 */
 	dn = pci_device_to_OF_node(dev);
-	ret = query_ddw(dev, ddw_avail, &query);
+	ret = query_ddw(dev, ddw_avail, &query, pdn);
 	if (ret != 0)
 		goto out_failed;
 
@@ -1077,7 +1148,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	/* check largest block * page size > max memory hotplug addr */
 	max_addr = ddw_memory_hotplug_max();
 	if (query.largest_available_block < (max_addr >> page_shift)) {
-		dev_dbg(&dev->dev, "can't map partition max 0x%llx with %u "
+		dev_dbg(&dev->dev, "can't map partition max 0x%llx with %llu "
 			  "%llu-sized pages\n", max_addr,  query.largest_available_block,
 			  1ULL << page_shift);
 		goto out_failed;