Commit 81091144 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] az6007: Fix some init sequences and use the right firmwares

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c108a5a0
......@@ -56,7 +56,8 @@ static struct drxk_config terratec_h7_drxk = {
.single_master = 1,
.no_i2c_bridge = 0,
.max_size = 64,
// .microcode_name = "dvb-usb-terratec-h5-drxk.fw",
.microcode_name = "dvb-usb-terratec-h7-drxk.fw",
.parallel_ts = 1,
};
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
......@@ -200,53 +201,31 @@ static int az6007_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
return 0;
}
#define AZ6007_POWER 0xbc
#define FX2_SCON1 0xc0
#define AZ6007_TS_THROUGH 0xc7
static int az6007_frontend_poweron(struct dvb_usb_adapter *adap)
{
int ret;
u8 req;
u16 value;
u16 index;
int blen;
struct dvb_usb_device *d = adap->dev;
deb_info("az6007_frontend_poweron adap=%p adap->dev=%p\n",
adap, adap->dev);
req = 0xBC;
value = 1; /* power on */
index = 3;
blen = 0;
ret = az6007_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0) {
err("az6007_frontend_poweron failed!!!");
return -EIO;
}
msleep_interruptible(200);
req = 0xBC;
value = 0; /* power off */
index = 3;
blen = 0;
ret = az6007_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0) {
err("az6007_frontend_poweron failed!!!");
return -EIO;
}
msleep_interruptible(200);
req = 0xBC;
value = 1; /* power on */
index = 3;
blen = 0;
az6007_usb_out_op(d, AZ6007_POWER /* 0xbc */, 0, 2, NULL, 0);
msleep(150);
az6007_usb_out_op(d, AZ6007_POWER /* 0xbc */, 1, 4, NULL, 0);
msleep(100);
az6007_usb_out_op(d, AZ6007_POWER /* 0xbc */, 1, 3, NULL, 0);
msleep(100);
az6007_usb_out_op(d, AZ6007_POWER /* 0xbc */, 1, 4, NULL, 0);
msleep(100);
az6007_usb_out_op(d, FX2_SCON1 /* 0xc0 */, 0, 3, NULL, 0);
msleep (10);
az6007_usb_out_op(d, FX2_SCON1 /* 0xc0 */, 1, 3, NULL, 0);
msleep (10);
az6007_usb_out_op(d, AZ6007_POWER /* 0xbc */, 0, 0, NULL, 0);
ret = az6007_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0) {
err("az6007_frontend_poweron failed!!!");
return -EIO;
}
deb_info("az6007_frontend_poweron: OK\n");
return 0;
......@@ -333,25 +312,6 @@ static int az6007_led_on_off(struct usb_interface *intf, int onoff)
return ret;
}
static int az6007_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff)
{
int ret;
u8 req;
u16 value;
u16 index;
int blen;
/* TS through */
req = 0xC7;
value = onoff;
index = 0;
blen = 0;
ret = az6007_usb_out_op(adap->dev, req, value, index, NULL, blen);
if (ret != 0)
return -EIO;
return 0;
}
static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
{
struct az6007_device_state *st = adap->priv;
......@@ -409,6 +369,27 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
return result;
}
int az6007_power_ctrl(struct dvb_usb_device *d, int onoff)
{
if (!onoff)
return 0;
info("Sending poweron sequence");
az6007_usb_out_op(d, AZ6007_TS_THROUGH /* 0xc7 */, 0, 0, NULL, 0);
#if 0
// Seems to be a poweroff sequence
az6007_usb_out_op(d, 0xbc, 1, 3, NULL, 0);
az6007_usb_out_op(d, 0xbc, 1, 4, NULL, 0);
az6007_usb_out_op(d, 0xc0, 0, 3, NULL, 0);
az6007_usb_out_op(d, 0xc0, 1, 3, NULL, 0);
az6007_usb_out_op(d, 0xbc, 0, 1, NULL, 0);
#endif
return 0;
}
static struct dvb_usb_device_properties az6007_properties;
static void az6007_usb_disconnect(struct usb_interface *intf)
......@@ -568,7 +549,7 @@ MODULE_DEVICE_TABLE(usb, az6007_usb_table);
static struct dvb_usb_device_properties az6007_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-az6007-03.fw",
.firmware = "dvb-usb-terratec-h7-az6007.fw",
.no_reconnect = 1,
.identify_state = az6007_identify_state,
......@@ -592,7 +573,7 @@ static struct dvb_usb_device_properties az6007_properties = {
.size_of_priv = sizeof(struct az6007_device_state),
}
},
/* .power_ctrl = az6007_power_ctrl, */
.power_ctrl = az6007_power_ctrl,
.read_mac_address = az6007_read_mac_addr,
.rc.legacy = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment