Commit 81317960 authored by Kukjin Kim's avatar Kukjin Kim Committed by Ben Dooks

ARM: S5P6440: Move common memory map definitions for S5P

1. Moved common memory map definitions for S5P such as S5P_VA_XXX
   into plat-s5p/include/mach/map-s5p.h from mach-s5p6440/include/mach.
2. Removed unnecessary definitions in the map.h and irq.c
3. Removed the unnecessary support for unaligned UART address
4. Renamed S5P_VA_VICx definitions as VA_VICx
5. Moved the definitons of VIC_BASE to plat-s5p/include/plat/irqs.h
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent e96b234b
......@@ -22,8 +22,8 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S5P_PA_UART
ldrne \rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff)
ldreq \rx, = S3C_PA_UART
ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
......
......@@ -14,94 +14,55 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
#include <plat/map-s5p.h>
/* Chip ID */
#define S5P6440_PA_CHIPID (0xE0000000)
#define S5P_PA_CHIPID S5P6440_PA_CHIPID
#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
/* SYSCON */
#define S5P6440_PA_SYSCON (0xE0100000)
#define S5P_PA_SYSCON S5P6440_PA_SYSCON
#define S5P_VA_SYSCON S3C_VA_SYS
#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0)
#define S5P_PA_CLK S5P6440_PA_CLK
#define S5P_VA_CLK (S5P_VA_SYSCON + 0x0)
#define S5P_PA_SYSCON S5P6440_PA_SYSCON
/* GPIO */
#define S5P6440_PA_GPIO (0xE0308000)
#define S5P_PA_GPIO S5P6440_PA_GPIO
#define S5P_VA_GPIO S3C_ADDR(0x00500000)
/* VIC0 */
#define S5P6440_PA_VIC0 (0xE4000000)
#define S5P_PA_VIC0 S5P6440_PA_VIC0
#define S5P_VA_VIC0 (S3C_VA_IRQ + 0x0)
#define VA_VIC0 S5P_VA_VIC0
/* VIC1 */
#define S5P6440_PA_VIC1 (0xE4100000)
#define S5P_PA_VIC1 S5P6440_PA_VIC1
#define S5P_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define VA_VIC1 S5P_VA_VIC1
/* Timer */
#define S5P6440_PA_TIMER (0xEA000000)
#define S5P_PA_TIMER S5P6440_PA_TIMER
#define S5P_VA_TIMER S3C_VA_TIMER
/* RTC */
#define S5P6440_PA_RTC (0xEA100000)
#define S5P_PA_RTC S5P6440_PA_RTC
#define S5P_VA_RTC S3C_ADDR(0x00600000)
/* WDT */
#define S5P6440_PA_WDT (0xEA200000)
#define S5P_PA_WDT S5P6440_PA_WDT
#define S5p_VA_WDT S3C_VA_WATCHDOG
/* UART */
#define S5P6440_PA_UART (0xEC000000)
#define S5P_PA_UART S5P6440_PA_UART
#define S5P_VA_UART S3C_VA_UART
/* HS USB OtG */
#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0)
#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400)
#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800)
#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00)
#define S5P_SZ_UART SZ_256
#define S5P6440_PA_IIC0 (0xEC104000)
#define S5P6440_PA_HSOTG (0xED100000)
/* HSMMC */
#define S5P6440_PA_HSMMC0 (0xED800000)
#define S5P6440_PA_HSMMC1 (0xED900000)
#define S5P6440_PA_HSMMC2 (0xEDA00000)
#define S5P_PA_UART0 (S5P_PA_UART + 0x0)
#define S5P_PA_UART1 (S5P_PA_UART + 0x400)
#define S5P_PA_UART2 (S5P_PA_UART + 0x800)
#define S5P_PA_UART3 (S5P_PA_UART + 0xC00)
#define S5P_UART_OFFSET (0x400)
#define S5P_VA_UARTx(x) (S5P_VA_UART + (S5P_PA_UART & 0xfffff) \
+ ((x) * S5P_UART_OFFSET))
#define S5P_VA_UART0 S5P_VA_UARTx(0)
#define S5P_VA_UART1 S5P_VA_UARTx(1)
#define S5P_VA_UART2 S5P_VA_UARTx(2)
#define S5P_VA_UART3 S5P_VA_UARTx(3)
#define S5P_SZ_UART SZ_256
/* I2C */
#define S5P6440_PA_IIC0 (0xEC104000)
#define S5P_PA_IIC0 S5P6440_PA_IIC0
#define S5p_VA_IIC0 S3C_ADDR(0x00700000)
/* SDRAM */
#define S5P6440_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5P6440_PA_SDRAM
/* compatibiltiy defines. */
#define S3C_PA_UART S5P_PA_UART
#define S3C_UART_OFFSET S5P_UART_OFFSET
#define S3C_PA_TIMER S5P_PA_TIMER
#define S3C_PA_IIC S5P_PA_IIC0
#define S3C_PA_UART S5P6440_PA_UART
#define S3C_PA_IIC S5P6440_PA_IIC0
#endif /* __ASM_ARCH_MAP_H */
......@@ -15,7 +15,7 @@
#include <mach/map.h>
#define S5P_CLKREG(x) (S5P_VA_CLK + (x))
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
#define S5P_APLL_LOCK S5P_CLKREG(0x00)
#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
......
......@@ -15,7 +15,7 @@
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(S5P_VA_VIC0 + VIC_RAW_STATUS);
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
......
......@@ -100,8 +100,8 @@ static void __init smdk6440_machine_init(void)
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.phys_io = S5P_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S5P_VA_UART) >> 18) & 0xfffc,
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5p6440_init_irq,
......
......@@ -37,31 +37,34 @@ static struct cpu_table cpu_ids[] __initdata = {
/* minimal IO mapping */
#define UART_OFFS (S5P_PA_UART & 0xfffff)
static struct map_desc s5p_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSCON,
.virtual = (unsigned long)S5P_VA_CHIPID,
.pfn = __phys_to_pfn(S5P_PA_CHIPID),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(S5P_PA_SYSCON),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)(S5P_VA_UART + UART_OFFS),
.pfn = __phys_to_pfn(S5P_PA_UART),
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_VIC0,
.virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S5P_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_VIC1,
.virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S5P_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_TIMER,
.virtual = (unsigned long)S3C_VA_TIMER,
.pfn = __phys_to_pfn(S5P_PA_TIMER),
.length = SZ_16K,
.type = MT_DEVICE,
......
......@@ -29,6 +29,8 @@
#define S5P_VIC0_BASE S5P_IRQ(0)
#define S5P_VIC1_BASE S5P_IRQ(32)
#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
#define IRQ_VIC0_BASE S5P_VIC0_BASE
#define IRQ_VIC1_BASE S5P_VIC1_BASE
......
/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5P - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_MAP_S5P_H
#define __ASM_PLAT_MAP_S5P_H __FILE__
#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
#define S5P_VA_GPIO S3C_ADDR(0x00500000)
#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
#define S5P_VA_SROMC S3C_ADDR(0x01100000)
#define S5P_VA_UART0 (S3C_VA_UART + 0x0)
#define S5P_VA_UART1 (S3C_VA_UART + 0x400)
#define S5P_VA_UART2 (S3C_VA_UART + 0x800)
#define S5P_VA_UART3 (S3C_VA_UART + 0xC00)
#define S3C_UART_OFFSET (0x400)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
#endif /* __ASM_PLAT_MAP_S5P_H */
......@@ -25,9 +25,6 @@
#include <plat/irq-vic-timer.h>
#include <plat/irq-uart.h>
#define VIC_VAADDR(no) (S5P_VA_VIC0 + ((no)*0x10000))
#define VIC_BASE(no) (S5P_VIC0_BASE + ((no)*32))
/*
* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
......@@ -61,7 +58,7 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
/* initialize the VICs */
for (irq = 0; irq < num_vic; irq++)
vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0);
vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment