Commit 816ad741 authored by Dinh Nguyen's avatar Dinh Nguyen Committed by Sascha Hauer

ARM: i.MX53: Add full iomux support for mx53

This iomux file contains all the available pins that are iomux
capable.
Signed-off-by: default avatarDinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent 00c89c1d
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
*/
......@@ -42,28 +42,28 @@
#include "devices-imx53.h"
static iomux_v3_cfg_t mx53_evk_pads[] = {
MX53_PAD_CSI0_D10__UART1_TXD,
MX53_PAD_CSI0_D11__UART1_RXD,
MX53_PAD_ATA_DIOW__UART1_TXD,
MX53_PAD_ATA_DMACK__UART1_RXD,
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
MX53_PAD_ATA_DMARQ__UART2_TXD,
MX53_PAD_ATA_DIOR__UART2_RTS,
MX53_PAD_ATA_INTRQ__UART2_CTS,
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
MX53_PAD_PATA_DIOR__UART2_RTS,
MX53_PAD_PATA_INTRQ__UART2_CTS,
MX53_PAD_ATA_CS_0__UART3_TXD,
MX53_PAD_ATA_CS_1__UART3_RXD,
MX53_PAD_ATA_DA_1__UART3_CTS,
MX53_PAD_ATA_DA_2__UART3_RTS,
MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
MX53_PAD_PATA_DA_1__UART3_CTS,
MX53_PAD_PATA_DA_2__UART3_RTS,
MX53_PAD_EIM_D16__CSPI1_SCLK,
MX53_PAD_EIM_D17__CSPI1_MISO,
MX53_PAD_EIM_D18__CSPI1_MOSI,
MX53_PAD_EIM_D16__ECSPI1_SCLK,
MX53_PAD_EIM_D17__ECSPI1_MISO,
MX53_PAD_EIM_D18__ECSPI1_MOSI,
/* ecspi chip select lines */
MX53_PAD_EIM_EB2__GPIO_2_30,
MX53_PAD_EIM_D19__GPIO_3_19,
MX53_PAD_EIM_EB2__GPIO2_30,
MX53_PAD_EIM_D19__GPIO3_19,
};
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
......
This source diff could not be displayed because it is too large. You can view the blob instead.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment