Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
Intel Wired LAN Doc Updates 2018-10-18

This series contains documentation fixes and updates for Intel wired
LAN drivers.

The following was done:
 - Updated incorrect URLs
 - removed document references which did not apply to the current
   in-kernel drivers
 - added documentation for fm10k driver
 - added missing documentation on existing or new features
 - added SPDX headers to all the documentation files

Lastly, the documentation was converted over to the RST (reStructured
Text) format, so that 'make htmldocs' produces pretty html driver
documentation for our drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/00-INDEX

@@ -70,12 +70,6 @@ driver.txt
 	- Softnet driver issues.
 ena.txt
 	- info on Amazon's Elastic Network Adapter (ENA)
-e100.txt
-	- info on Intel's EtherExpress PRO/100 line of 10/100 boards
-e1000.txt
-	- info on Intel's E1000 line of gigabit ethernet boards
-e1000e.txt
-	- README for the Intel Gigabit Ethernet Driver (e1000e).
 eql.txt
 	- serial IP load balancing
 fib_trie.txt
@@ -94,16 +88,8 @@ generic_netlink.txt
 	- info on Generic Netlink
 gianfar.txt
 	- Gianfar Ethernet Driver.
-i40e.txt
-	- README for the Intel Ethernet Controller XL710 Driver (i40e).
-iavf.txt
-	- README for the Intel Ethernet Adaptive Virtual Function Driver (iavf).
 ieee802154.txt
 	- Linux IEEE 802.15.4 implementation, API and drivers
-igb.txt
-	- README for the Intel Gigabit Ethernet Driver (igb).
-igbvf.txt
-	- README for the Intel Gigabit Ethernet Driver (igbvf).
 ip-sysctl.txt
 	- /proc/sys/net/ipv4/* variables
 ip_dynaddr.txt
@@ -120,12 +106,6 @@ ipvs-sysctl.txt
 	- Per-inode explanation of the /proc/sys/net/ipv4/vs interface.
 irda.txt
 	- where to get IrDA (infrared) utilities and info for Linux.
-ixgb.txt
-	- README for the Intel 10 Gigabit Ethernet Driver (ixgb).
-ixgbe.txt
-	- README for the Intel 10 Gigabit Ethernet Driver (ixgbe).
-ixgbevf.txt
-	- README for the Intel Virtual Function (VF) Driver (ixgbevf).
 l2tp.txt
 	- User guide to the L2TP tunnel protocol.
 lapb-module.txt

Documentation/networking/e100.rst

-==============================================================
+.. SPDX-License-Identifier: GPL-2.0+
+
 Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
 ==============================================================
 

Documentation/networking/e1000.rst

-===========================================================
+.. SPDX-License-Identifier: GPL-2.0+
+
 Linux* Base Driver for Intel(R) Ethernet Network Connection
 ===========================================================
 

Documentation/networking/fm10k.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
+==============================================================
+
+August 20, 2018
+Copyright(c) 2015-2018 Intel Corporation.
+
+Contents
+========
+- Identifying Your Adapter
+- Additional Configurations
+- Performance Tuning
+- Known Issues
+- Support
+
+Identifying Your Adapter
+========================
+The driver in this release is compatible with devices based on the Intel(R)
+Ethernet Multi-host Controller.
+
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Flow Control
+------------
+The Intel(R) Ethernet Switch Host Interface Driver does not support Flow
+Control. It will not send pause frames. This may result in dropped frames.
+
+
+Virtual Functions (VFs)
+-----------------------
+Use sysfs to enable VFs.
+Valid Range: 0-64
+
+For example::
+
+    echo $num_vf_enabled > /sys/class/net/$dev/device/sriov_numvfs //enable VFs
+    echo 0 > /sys/class/net/$dev/device/sriov_numvfs //disable VFs
+
+NOTE: Neither the device nor the driver control how VFs are mapped into config
+space. Bus layout will vary by operating system. On operating systems that
+support it, you can check sysfs to find the mapping.
+
+NOTE: When SR-IOV mode is enabled, hardware VLAN filtering and VLAN tag
+stripping/insertion will remain enabled. Please remove the old VLAN filter
+before the new VLAN filter is added. For example::
+
+    ip link set eth0 vf 0 vlan 100	// set vlan 100 for VF 0
+    ip link set eth0 vf 0 vlan 0	// Delete vlan 100
+    ip link set eth0 vf 0 vlan 200	// set a new vlan 200 for VF 0
+
+
+Additional Features and Configurations
+======================================
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+    ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+    ip link set mtu 9000 dev eth<x>
+    ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file:
+
+- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
+- For SLES: /etc/sysconfig/network/<config_file>
+
+NOTE: The maximum MTU setting for Jumbo Frames is 15342. This value coincides
+with the maximum Jumbo Frames size of 15364 bytes.
+
+NOTE: This driver will attempt to use multiple page sized buffers to receive
+each jumbo packet. This should help to avoid buffer starvation issues when
+allocating receive packets.
+
+
+Generic Receive Offload, aka GRO
+--------------------------------
+The driver supports the in-kernel software implementation of GRO. GRO has
+shown that by coalescing Rx traffic into larger chunks of data, CPU
+utilization can be significantly reduced when under large Rx load. GRO is an
+evolution of the previously-used LRO interface. GRO is able to coalesce
+other protocols besides TCP. It's also safe to use with configurations that
+are problematic for LRO, namely bridging and iSCSI.
+
+
+
+Supported ethtool Commands and Options for Filtering
+----------------------------------------------------
+-n --show-nfc
+  Retrieves the receive network flow classification configurations.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
+  Retrieves the hash options for the specified network traffic type.
+
+-N --config-nfc
+  Configures the receive network flow classification.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
+  Configures the hash options for the specified network traffic type.
+
+- udp4: UDP over IPv4
+- udp6: UDP over IPv6
+- f Hash on bytes 0 and 1 of the Layer 4 header of the rx packet.
+- n Hash on bytes 2 and 3 of the Layer 4 header of the rx packet.
+
+
+Known Issues/Troubleshooting
+============================
+
+Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
+---------------------------------------------------------------------------------------
+KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
+includes traditional PCIe devices, as well as SR-IOV-capable devices based on
+the Intel Ethernet Controller XL710.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.

Documentation/networking/i40e.txt

-Linux Base Driver for the Intel(R) Ethernet Controller XL710 Family
-===================================================================
-
-Intel i40e Linux driver.
-Copyright(c) 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Performance Tuning
-- Known Issues
-- Support
-
-
-Identifying Your Adapter
-========================
-
-The driver in this release is compatible with the Intel Ethernet
-Controller XL710 Family.
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
-    http://support.intel.com/support/network/sb/CS-012904.htm
-
-
-Enabling the driver
-===================
-
-The driver is enabled via the standard kernel configuration system,
-using the make command:
-
-     make config/oldconfig/menuconfig/etc.
-
-The driver is located in the menu structure at:
-
-	-> Device Drivers
-	  -> Network device support (NETDEVICES [=y])
-	    -> Ethernet driver support
-	      -> Intel devices
-	        -> Intel(R) Ethernet Controller XL710 Family
-
-Additional Configurations
-=========================
-
-  Generic Receive Offload (GRO)
-  -----------------------------
-  The driver supports the in-kernel software implementation of GRO.  GRO has
-  shown that by coalescing Rx traffic into larger chunks of data, CPU
-  utilization can be significantly reduced when under large Rx load.  GRO is
-  an evolution of the previously-used LRO interface.  GRO is able to coalesce
-  other protocols besides TCP.  It's also safe to use with configurations that
-  are problematic for LRO, namely bridging and iSCSI.
-
-  Ethtool
-  -------
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information. The latest
-  ethtool version is required for this functionality.
-
-  The latest release of ethtool can be found from
-  https://www.kernel.org/pub/software/network/ethtool
-
-
-  Flow Director n-ntuple traffic filters (FDir)
-  ---------------------------------------------
-  The driver utilizes the ethtool interface for configuring ntuple filters,
-  via "ethtool -N <device> <filter>".
-
-  The sctp4, ip4, udp4, and tcp4 flow types are supported with the standard
-  fields including src-ip, dst-ip, src-port and dst-port. The driver only
-  supports fully enabling or fully masking the fields, so use of the mask
-  fields for partial matches is not supported.
-
-  Additionally, the driver supports using the action to specify filters for a
-  Virtual Function. You can specify the action as a 64bit value, where the
-  lower 32 bits represents the queue number, while the next 8 bits represent
-  which VF. Note that 0 is the PF, so the VF identifier is offset by 1. For
-  example:
-
-    ... action 0x800000002 ...
-
-  Would indicate to direct traffic for Virtual Function 7 (8 minus 1) on queue
-  2 of that VF.
-
-  The driver also supports using the user-defined field to specify 2 bytes of
-  arbitrary data to match within the packet payload in addition to the regular
-  fields. The data is specified in the lower 32bits of the user-def field in
-  the following way:
-
-  +----------------------------+---------------------------+
-  | 31    28    24    20    16 | 15    12     8     4     0|
-  +----------------------------+---------------------------+
-  | offset into packet payload |  2 bytes of flexible data |
-  +----------------------------+---------------------------+
-
-  As an example,
-
-    ... user-def 0x4FFFF ....
-
-  means to match the value 0xFFFF 4 bytes into the packet payload. Note that
-  the offset is based on the beginning of the payload, and not the beginning
-  of the packet. Thus
-
-    flow-type tcp4 ... user-def 0x8BEAF ....
-
-  would match TCP/IPv4 packets which have the value 0xBEAF 8bytes into the
-  TCP/IPv4 payload.
-
-  For ICMP, the hardware parses the ICMP header as 4 bytes of header and 4
-  bytes of payload, so if you want to match an ICMP frames payload you may need
-  to add 4 to the offset in order to match the data.
-
-  Furthermore, the offset can only be up to a value of 64, as the hardware
-  will only read up to 64 bytes of data from the payload. It must also be even
-  as the flexible data is 2 bytes long and must be aligned to byte 0 of the
-  packet payload.
-
-  When programming filters, the hardware is limited to using a single input
-  set for each flow type. This means that it is an error to program two
-  different filters with the same type that don't match on the same fields.
-  Thus the second of the following two commands will fail:
-
-    ethtool -N <device> flow-type tcp4 src-ip 192.168.0.7 action 5
-    ethtool -N <device> flow-type tcp4 dst-ip 192.168.15.18 action 1
-
-  This is because the first filter will be accepted and reprogram the input
-  set for TCPv4 filters, but the second filter will be unable to reprogram the
-  input set until all the conflicting TCPv4 filters are first removed.
-
-  Note that the user-defined flexible offset is also considered part of the
-  input set and cannot be programmed separately for multiple filters of the
-  same type. However, the flexible data is not part of the input set and
-  multiple filters may use the same offset but match against different data.
-
-  Data Center Bridging (DCB)
-  --------------------------
-  DCB configuration is not currently supported.
-
-  FCoE
-  ----
-  The driver supports Fiber Channel over Ethernet (FCoE) and Data Center
-  Bridging (DCB) functionality. Configuring DCB and FCoE is outside the scope
-  of this driver doc. Refer to http://www.open-fcoe.org/ for FCoE project
-  information and http://www.open-lldp.org/ or email list
-  e1000-eedc@lists.sourceforge.net for DCB information.
-
-  MAC and VLAN anti-spoofing feature
-  ----------------------------------
-  When a malicious driver attempts to send a spoofed packet, it is dropped by
-  the hardware and not transmitted.  An interrupt is sent to the PF driver
-  notifying it of the spoof attempt.
-
-  When a spoofed packet is detected the PF driver will send the following
-  message to the system log (displayed by  the "dmesg" command):
-
-  Spoof event(s) detected on VF (n)
-
-  Where n=the VF that attempted to do the spoofing.
-
-
-Performance Tuning
-==================
-
-An excellent article on performance tuning can be found at:
-
-http://www.redhat.com/promo/summit/2008/downloads/pdf/Thursday/Mark_Wagner.pdf
-
-
-Known Issues
-============
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
-    http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-    http://e1000.sourceforge.net
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sourceforge.net and copy
-netdev@vger.kernel.org.

Documentation/networking/iavf.txt

-Linux* Base Driver for Intel(R) Network Connection
-==================================================
-
-Intel Ethernet Adaptive Virtual Function Linux driver.
-Copyright(c) 2013-2018 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Known Issues/Troubleshooting
-- Support
-
-This file describes the iavf Linux* Base Driver. This driver
-was formerly called i40evf.
-
-The iavf driver supports the below mentioned virtual function
-devices and can only be activated on kernels running the i40e or
-newer Physical Function (PF) driver compiled with CONFIG_PCI_IOV.
-The iavf driver requires CONFIG_PCI_MSI to be enabled.
-
-The guest OS loading the iavf driver must support MSI-X interrupts.
-
-Supported Hardware
-==================
-Intel XL710 X710 Virtual Function
-Intel X722 Virtual Function
-Intel Ethernet Adaptive Virtual Function
-
-Identifying Your Adapter
-========================
-
-For more information on how to identify your adapter, go to the
-Adapter & Driver ID Guide at:
-
-    https://www.intel.com/content/www/us/en/support/articles/000005584/network-and-i-o/ethernet-products.html
-
-
-Known Issues/Troubleshooting
-============================
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
-    http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-    http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net

Documentation/networking/ice.txt → Documentation/networking/ice.rst

-Intel(R) Ethernet Connection E800 Series Linux Driver
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
 ===================================================================
 
 Intel ice Linux driver.
@@ -6,34 +8,38 @@ Copyright(c) 2018 Intel Corporation.
 
 Contents
 ========
+
 - Enabling the driver
 - Support
 
 The driver in this release supports Intel's E800 Series of products. For
-more information, visit Intel's support page at http://support.intel.com.
+more information, visit Intel's support page at https://support.intel.com.
 
 Enabling the driver
 ===================
-
 The driver is enabled via the standard kernel configuration system,
-using the make command:
+using the make command::
 
-     Make oldconfig/silentoldconfig/menuconfig/etc.
+  make oldconfig/silentoldconfig/menuconfig/etc.
 
 The driver is located in the menu structure at:
 
-	-> Device Drivers
-	  -> Network device support (NETDEVICES [=y])
-	    -> Ethernet driver support
-	      -> Intel devices
-	        -> Intel(R) Ethernet Connection E800 Series Support
+  -> Device Drivers
+    -> Network device support (NETDEVICES [=y])
+      -> Ethernet driver support
+        -> Intel devices
+          -> Intel(R) Ethernet Connection E800 Series Support
 
 Support
 =======
-
 For general information, go to the Intel support website at:
 
-    http://support.intel.com
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
 
-If an issue is identified with the released source code, please email
-the maintainer listed in the MAINTAINERS file.
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.

Documentation/networking/igb.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for Intel(R) Ethernet Network Connection
+===========================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+
+Identifying Your Adapter
+========================
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Command Line Parameters
+========================
+If the driver is built as a module, the following optional parameters are used
+by entering them on the command line with the modprobe command using this
+syntax::
+
+    modprobe igb [<option>=<VAL1>,<VAL2>,...]
+
+There needs to be a <VAL#> for each network port in the system supported by
+this driver. The values will be applied to each instance, in function order.
+For example::
+
+    modprobe igb max_vfs=2,4
+
+In this case, there are two network ports supported by igb in the system.
+
+NOTE: A descriptor describes a data buffer and attributes related to the data
+buffer. This information is accessed by the hardware.
+
+max_vfs
+-------
+:Valid Range: 0-7
+
+This parameter adds support for SR-IOV. It causes the driver to spawn up to
+max_vfs worth of virtual functions.  If the value is greater than 0 it will
+also force the VMDq parameter to be 1 or more.
+
+The parameters for the driver are referenced by position. Thus, if you have a
+dual port adapter, or more than one adapter in your system, and want N virtual
+functions per port, you must specify a number for each port with each parameter
+separated by a comma. For example::
+
+    modprobe igb max_vfs=4
+
+This will spawn 4 VFs on the first port.
+
+::
+
+    modprobe igb max_vfs=2,4
+
+This will spawn 2 VFs on the first port and 4 VFs on the second port.
+
+NOTE: Caution must be used in loading the driver with these parameters.
+Depending on your system configuration, number of slots, etc., it is impossible
+to predict in all cases where the positions would be on the command line.
+
+NOTE: Neither the device nor the driver control how VFs are mapped into config
+space. Bus layout will vary by operating system. On operating systems that
+support it, you can check sysfs to find the mapping.
+
+NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
+and VLAN tag stripping/insertion will remain enabled. Please remove the old
+VLAN filter before the new VLAN filter is added. For example::
+
+    ip link set eth0 vf 0 vlan 100	// set vlan 100 for VF 0
+    ip link set eth0 vf 0 vlan 0	// Delete vlan 100
+    ip link set eth0 vf 0 vlan 200	// set a new vlan 200 for VF 0
+
+Debug
+-----
+:Valid Range: 0-16 (0=none,...,16=all)
+:Default Value: 0
+
+This parameter adjusts the level debug messages displayed in the system logs.
+
+
+Additional Features and Configurations
+======================================
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+    ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+    ip link set mtu 9000 dev eth<x>
+    ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file:
+
+- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
+- For SLES: /etc/sysconfig/network/<config_file>
+
+NOTE: The maximum MTU setting for Jumbo Frames is 9216. This value coincides
+with the maximum Jumbo Frames size of 9234 bytes.
+
+NOTE: Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
+poor performance or loss of link.
+
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+
+https://www.kernel.org/pub/software/network/ethtool/
+
+
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
+
+WoL will be enabled on the system during the next shut down or reboot. For
+this driver version, in order to enable WoL, the igb driver must be loaded
+prior to shutting down or suspending the system.
+
+NOTE: Wake on LAN is only supported on port A of multi-port devices.  Also
+Wake On LAN is not supported for the following device:
+- Intel(R) Gigabit VT Quad Port Server Adapter
+
+
+Multiqueue
+----------
+In this mode, a separate MSI-X vector is allocated for each queue and one for
+"other" interrupts such as link status change and errors. All interrupts are
+throttled via interrupt moderation. Interrupt moderation must be used to avoid
+interrupt storms while the driver is processing one interrupt. The moderation
+value should be at least as large as the expected time for the driver to
+process an interrupt. Multiqueue is off by default.
+
+REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found,
+the system will fallback to MSI or to Legacy interrupts. This driver supports
+receive multiqueue on all kernels that support MSI-X.
+
+NOTE: On some kernels a reboot is required to switch between single queue mode
+and multiqueue mode or vice-versa.
+
+
+MAC and VLAN anti-spoofing feature
+----------------------------------
+When a malicious driver attempts to send a spoofed packet, it is dropped by the
+hardware and not transmitted.
+
+An interrupt is sent to the PF driver notifying it of the spoof attempt. When a
+spoofed packet is detected, the PF driver will send the following message to
+the system log (displayed by the "dmesg" command):
+Spoof event(s) detected on VF(n), where n = the VF that attempted to do the
+spoofing
+
+
+Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
+------------------------------------------------------------
+You can set a MAC address of a Virtual Function (VF), a default VLAN and the
+rate limit using the IProute2 tool. Download the latest version of the
+IProute2 tool from Sourceforge if your version does not have all the features
+you require.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.

Documentation/networking/igb.txt

-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Support
-
-Identifying Your Adapter
-========================
-
-This driver supports all 82575, 82576 and 82580-based Intel (R) gigabit network
-connections.
-
-For specific information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
-    http://support.intel.com/support/go/network/adapter/idguide.htm
-
-Command Line Parameters
-=======================
-
-The default value for each parameter is generally the recommended setting,
-unless otherwise noted.
-
-max_vfs
--------
-Valid Range:   0-7
-Default Value: 0
-
-This parameter adds support for SR-IOV.  It causes the driver to spawn up to
-max_vfs worth of virtual function.
-
-Additional Configurations
-=========================
-
-  Jumbo Frames
-  ------------
-  Jumbo Frames support is enabled by changing the MTU to a value larger than
-  the default of 1500.  Use the ip command to increase the MTU size.
-  For example:
-
-       ip link set dev eth<x> mtu 9000
-
-  This setting is not saved across reboots.
-
-  Notes:
-
-  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
-    with the maximum Jumbo Frames size of 9234 bytes.
-
-  - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
-    poor performance or loss of link.
-
-  ethtool
-  -------
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information. The latest
-  version of ethtool can be found at:
-
-  https://www.kernel.org/pub/software/network/ethtool/
-
-  Enabling Wake on LAN* (WoL)
-  ---------------------------
-  WoL is configured through the ethtool* utility.
-
-  For instructions on enabling WoL with ethtool, refer to the ethtool man page.
-
-  WoL will be enabled on the system during the next shut down or reboot.
-  For this driver version, in order to enable WoL, the igb driver must be
-  loaded when shutting down or rebooting the system.
-
-  Wake On LAN is only supported on port A of multi-port adapters.
-
-  Wake On LAN is not supported for the Intel(R) Gigabit VT Quad Port Server
-  Adapter.
-
-  Multiqueue
-  ----------
-  In this mode, a separate MSI-X vector is allocated for each queue and one
-  for "other" interrupts such as link status change and errors.  All
-  interrupts are throttled via interrupt moderation.  Interrupt moderation
-  must be used to avoid interrupt storms while the driver is processing one
-  interrupt.  The moderation value should be at least as large as the expected
-  time for the driver to process an interrupt. Multiqueue is off by default.
-
-  REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
-  found, the system will fallback to MSI or to Legacy interrupts.
-
-  MAC and VLAN anti-spoofing feature
-  ----------------------------------
-  When a malicious driver attempts to send a spoofed packet, it is dropped by
-  the hardware and not transmitted.  An interrupt is sent to the PF driver
-  notifying it of the spoof attempt.
-
-  When a spoofed packet is detected the PF driver will send the following
-  message to the system log (displayed by  the "dmesg" command):
-
-  Spoof event(s) detected on VF(n)
-
-  Where n=the VF that attempted to do the spoofing.
-
-  Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
-  ------------------------------------------------------------
-  You can set a MAC address of a Virtual Function (VF), a default VLAN and the
-  rate limit using the IProute2 tool. Download the latest version of the
-  iproute2 tool from Sourceforge if your version does not have all the
-  features you require.
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
-    www.intel.com/support/
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-    http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net

Documentation/networking/igbvf.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
+============================================================
+
+Intel Gigabit Virtual Function Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+This driver supports Intel 82576-based virtual function devices-based virtual
+function devices that can only be activated on kernels that support SR-IOV.
+
+SR-IOV requires the correct platform and OS support.
+
+The guest OS loading this driver must support MSI-X interrupts.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel adapter. All hardware requirements listed apply to use
+with Linux.
+
+Driver information can be obtained using ethtool, lspci, and ifconfig.
+Instructions on updating ethtool can be found in the section Additional
+Configurations later in this document.
+
+NOTE: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+
+Identifying Your Adapter
+========================
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Additional Features and Configurations
+======================================
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+
+https://www.kernel.org/pub/software/network/ethtool/
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.

Documentation/networking/igbvf.txt

-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Support
-
-This file describes the igbvf Linux* Base Driver for Intel Network Connection.
-
-The igbvf driver supports 82576-based virtual function devices that can only
-be activated on kernels that support SR-IOV. SR-IOV requires the correct
-platform and OS support.
-
-The igbvf driver requires the igb driver, version 2.0 or later. The igbvf
-driver supports virtual functions generated by the igb driver with a max_vfs
-value of 1 or greater. For more information on the max_vfs parameter refer
-to the README included with the igb driver.
-
-The guest OS loading the igbvf driver must support MSI-X interrupts.
-
-This driver is only supported as a loadable module at this time.  Intel is
-not supplying patches against the kernel source to allow for static linking
-of the driver.  For questions related to hardware requirements, refer to the
-documentation supplied with your Intel Gigabit adapter.  All hardware
-requirements listed apply to use with Linux.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
-
-Identifying Your Adapter
-========================
-
-The igbvf driver supports 82576-based virtual function devices that can only
-be activated on kernels that support SR-IOV.
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
-    http://support.intel.com/support/go/network/adapter/idguide.htm
-
-For the latest Intel network drivers for Linux, refer to the following
-website.  In the search field, enter your adapter name or type, or use the
-networking link on the left to search for your adapter:
-
-    http://downloadcenter.intel.com/scripts-df-external/Support_Intel.aspx
-
-Additional Configurations
-=========================
-
-  ethtool
-  -------
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  The ethtool
-  version 3.0 or later is required for this functionality, although we
-  strongly recommend downloading the latest version at:
-
-  https://www.kernel.org/pub/software/network/ethtool/
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
-    http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-    http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net

Documentation/networking/index.rst

@@ -14,6 +14,16 @@ Contents:
    dpaa2/index
    e100
    e1000
+   e1000e
+   fm10k
+   igb
+   igbvf
+   ixgb
+   ixgbe
+   ixgbevf
+   i40e
+   iavf
+   ice
    kapi
    z8530book
    msg_zerocopy

Documentation/networking/ixgbevf.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
+=============================================================
+
+Intel 10 Gigabit Virtual Function Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Known Issues
+- Support
+
+This driver supports 82599, X540, X550, and X552-based virtual function devices
+that can only be activated on kernels that support SR-IOV.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel adapter. All hardware requirements listed apply to use
+with Linux.
+
+
+Identifying Your Adapter
+========================
+The driver is compatible with devices based on the following:
+
+  * Intel(R) Ethernet Controller 82598
+  * Intel(R) Ethernet Controller 82599
+  * Intel(R) Ethernet Controller X520
+  * Intel(R) Ethernet Controller X540
+  * Intel(R) Ethernet Controller x550
+  * Intel(R) Ethernet Controller X552
+  * Intel(R) Ethernet Controller X553
+
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+https://www.intel.com/support
+
+Known Issues/Troubleshooting
+============================
+
+SR-IOV requires the correct platform and OS support.
+
+The guest OS loading this driver must support MSI-X interrupts.
+
+This driver is only supported as a loadable module at this time. Intel is not
+supplying patches against the kernel source to allow for static linking of the
+drivers.
+
+VLANs: There is a limit of a total of 64 shared VLANs to 1 or more VFs.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.

Documentation/networking/ixgbevf.txt

-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Known Issues/Troubleshooting
-- Support
-
-This file describes the ixgbevf Linux* Base Driver for Intel Network
-Connection.
-
-The ixgbevf driver supports 82599-based virtual function devices that can only
-be activated on kernels with CONFIG_PCI_IOV enabled.
-
-The ixgbevf driver supports virtual functions generated by the ixgbe driver
-with a max_vfs value of 1 or greater.
-
-The guest OS loading the ixgbevf driver must support MSI-X interrupts.
-
-VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
-
-Identifying Your Adapter
-========================
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
-    http://support.intel.com/support/go/network/adapter/idguide.htm
-
-Known Issues/Troubleshooting
-============================
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
-    http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-    http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net

MAINTAINERS

@@ -7351,15 +7351,16 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
 S:	Supported
 F:	Documentation/networking/e100.rst
 F:	Documentation/networking/e1000.rst
-F:	Documentation/networking/e1000e.txt
-F:	Documentation/networking/igb.txt
-F:	Documentation/networking/igbvf.txt
-F:	Documentation/networking/ixgb.txt
-F:	Documentation/networking/ixgbe.txt
-F:	Documentation/networking/ixgbevf.txt
-F:	Documentation/networking/i40e.txt
-F:	Documentation/networking/iavf.txt
-F:	Documentation/networking/ice.txt
+F:	Documentation/networking/e1000e.rst
+F:	Documentation/networking/fm10k.rst
+F:	Documentation/networking/igb.rst
+F:	Documentation/networking/igbvf.rst
+F:	Documentation/networking/ixgb.rst
+F:	Documentation/networking/ixgbe.rst
+F:	Documentation/networking/ixgbevf.rst
+F:	Documentation/networking/i40e.rst
+F:	Documentation/networking/iavf.rst
+F:	Documentation/networking/ice.rst
 F:	drivers/net/ethernet/intel/
 F:	drivers/net/ethernet/intel/*/
 F:	include/linux/avf/virtchnl.h

drivers/net/ethernet/intel/Kconfig

@@ -68,6 +68,9 @@ config E1000E
 
 	  <http://support.intel.com>
 
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000e.rst>.
+
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000e.
 
@@ -94,7 +97,7 @@ config IGB
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.rst>.
+	  <file:Documentation/networking/igb.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igb.
@@ -130,7 +133,7 @@ config IGBVF
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.rst>.
+	  <file:Documentation/networking/igbvf.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igbvf.
@@ -147,7 +150,7 @@ config IXGB
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/ixgb.txt>.
+	  <file:Documentation/networking/ixgb.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgb.
@@ -164,6 +167,9 @@ config IXGBE
 
 	  <http://support.intel.com>
 
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ixgbe.rst>.
+
 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbe.
 
@@ -205,7 +211,7 @@ config IXGBEVF
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/ixgbevf.txt>.
+	  <file:Documentation/networking/ixgbevf.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbevf.  MSI-X interrupt support is required
@@ -222,6 +228,9 @@ config I40E
 
 	  <http://support.intel.com>
 
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/i40e.rst>.
+
 	  To compile this driver as a module, choose M here. The module
 	  will be called i40e.
 
@@ -254,6 +263,9 @@ config I40EVF
 
 	  This driver was formerly named i40evf.
 
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/iavf.rst>.
+
 	  To compile this driver as a module, choose M here. The module
 	  will be called iavf.  MSI-X interrupt support is required
 	  for this driver to work correctly.
@@ -269,6 +281,9 @@ config ICE
 
 	  <http://support.intel.com>
 
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ice.rst>.
+
 	  To compile this driver as a module, choose M here. The module
 	  will be called ice.
 
@@ -284,6 +299,9 @@ config FM10K
 
 	  <http://support.intel.com>
 
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/fm10k.rst>.
+
 	  To compile this driver as a module, choose M here. The module
 	  will be called fm10k.  MSI-X interrupt support is required