Commit 818270d5 authored by Rob Herring's avatar Rob Herring

ARM: versatile: use OF init for sp804 timer

Enable DT based init for the sp804 timers on versatile DT platform.
Signed-off-by: default avatarRob Herring <rob.herring@calxeda.com>
parent cc8e9ad8
......@@ -121,6 +121,18 @@ watchdog@101e1000 {
interrupts = <0>;
};
timer@101e2000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e2000 0x1000>;
interrupts = <4>;
};
timer@101e3000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e3000 0x1000>;
interrupts = <5>;
};
gpio0: gpio@101e4000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x101e4000 0x1000>;
......
......@@ -749,12 +749,25 @@ void versatile_restart(char mode, const char *cmd)
/* Early initializations */
void __init versatile_init_early(void)
{
u32 val;
void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET;
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
val = readl(__io_address(VERSATILE_SCTL_BASE));
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
__io_address(VERSATILE_SCTL_BASE));
}
void __init versatile_init(void)
......@@ -785,19 +798,6 @@ void __init versatile_init(void)
*/
void __init versatile_timer_init(void)
{
u32 val;
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
val = readl(__io_address(VERSATILE_SCTL_BASE));
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
__io_address(VERSATILE_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
......
......@@ -45,7 +45,6 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
.init_time = versatile_timer_init,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
.restart = versatile_restart,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment