Commit 81898a44 authored by Rajendra Nayak's avatar Rajendra Nayak Committed by Linus Walleij

pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET

The SDC_QDSD_PINGROUP/UFS_RESET macros are missing the .tile info needed to
calculate the right register offsets. Adding them here and also
adjusting the offsets accordingly.

Fixes: f2ae04c4 ("pinctrl: qcom: Add SC7180 pinctrl driver")
Reported-by: default avatarVeerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: default avatarRajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/20191021141507.24066-1-rnayak@codeaurora.orgReviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 0b329285
......@@ -77,6 +77,7 @@ enum {
.intr_cfg_reg = 0, \
.intr_status_reg = 0, \
.intr_target_reg = 0, \
.tile = SOUTH, \
.mux_bit = -1, \
.pull_bit = pull, \
.drv_bit = drv, \
......@@ -102,6 +103,7 @@ enum {
.intr_cfg_reg = 0, \
.intr_status_reg = 0, \
.intr_target_reg = 0, \
.tile = SOUTH, \
.mux_bit = -1, \
.pull_bit = 3, \
.drv_bit = 0, \
......@@ -1087,14 +1089,14 @@ static const struct msm_pingroup sc7180_groups[] = {
[116] = PINGROUP(116, WEST, qup04, qup04, _, _, _, _, _, _, _),
[117] = PINGROUP(117, WEST, dp_hot, _, _, _, _, _, _, _, _),
[118] = PINGROUP(118, WEST, _, _, _, _, _, _, _, _, _),
[119] = UFS_RESET(ufs_reset, 0x97f000),
[120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x97a000, 15, 0),
[121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x97a000, 13, 6),
[122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x97a000, 11, 3),
[123] = SDC_QDSD_PINGROUP(sdc1_data, 0x97a000, 9, 0),
[124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x97b000, 14, 6),
[125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x97b000, 11, 3),
[126] = SDC_QDSD_PINGROUP(sdc2_data, 0x97b000, 9, 0),
[119] = UFS_RESET(ufs_reset, 0x7f000),
[120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x7a000, 15, 0),
[121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x7a000, 13, 6),
[122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x7a000, 11, 3),
[123] = SDC_QDSD_PINGROUP(sdc1_data, 0x7a000, 9, 0),
[124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x7b000, 14, 6),
[125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x7b000, 11, 3),
[126] = SDC_QDSD_PINGROUP(sdc2_data, 0x7b000, 9, 0),
};
static const struct msm_pinctrl_soc_data sc7180_pinctrl = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment