Commit 81b095ca authored by Paolo Abeni's avatar Paolo Abeni

Merge branch 'selftests-assortment-of-fixes'

Petr Machata says:

====================
selftests: Assortment of fixes

This is a loose follow-up to the Kernel CI patchset posted recently. It
contains various fixes that were supposed to be part of said patchset, but
didn't fit due to its size. The latter 4 patches were written independently
of the CI effort, but again didn't fit in their intended patchsets.

- Patch #1 unifies code of two very similar looking functions, busywait()
  and slowwait().

- Patch #2 adds sanity checks around the setting of NETIFS, which carries
  list of interfaces to run on.

- Patch #3 changes bail_on_lldpad() to SKIP instead of FAILing.

- Patches #4 to #7 fix issues in selftests.

- Patches #8 to #10 add topology diagrams to several selftests.
  This should have been part of the mlxsw leg of NH group stats patches,
  but again, it did not fit in due to size.
====================

Link: https://lore.kernel.org/r/cover.1712940759.git.petrm@nvidia.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parents 62d6d91d 74ddac07
...@@ -65,9 +65,8 @@ same_speeds_autoneg_off() ...@@ -65,9 +65,8 @@ same_speeds_autoneg_off()
setup_wait_dev_with_timeout $h1 setup_wait_dev_with_timeout $h1
setup_wait_dev_with_timeout $h2 setup_wait_dev_with_timeout $h2
ping_do $h1 192.0.2.2 ping_do $h1 192.0.2.2
check_err $? "speed $speed autoneg off" check_err $? "ping with speed $speed autoneg off"
log_test "force of same speed autoneg off" log_test "force speed $speed on both ends"
log_info "speed = $speed"
done done
ethtool -s $h2 autoneg on ethtool -s $h2 autoneg on
...@@ -112,9 +111,8 @@ combination_of_neg_on_and_off() ...@@ -112,9 +111,8 @@ combination_of_neg_on_and_off()
setup_wait_dev_with_timeout $h1 setup_wait_dev_with_timeout $h1
setup_wait_dev_with_timeout $h2 setup_wait_dev_with_timeout $h2
ping_do $h1 192.0.2.2 ping_do $h1 192.0.2.2
check_err $? "h1-speed=$speed autoneg off, h2 autoneg on" check_err $? "ping with h1-speed=$speed autoneg off, h2 autoneg on"
log_test "one side with autoneg off and another with autoneg on" log_test "force speed $speed vs. autoneg"
log_info "force speed = $speed"
done done
ethtool -s $h1 autoneg on ethtool -s $h1 autoneg on
...@@ -207,10 +205,9 @@ advertise_subset_of_speeds() ...@@ -207,10 +205,9 @@ advertise_subset_of_speeds()
setup_wait_dev_with_timeout $h1 setup_wait_dev_with_timeout $h1
setup_wait_dev_with_timeout $h2 setup_wait_dev_with_timeout $h2
ping_do $h1 192.0.2.2 ping_do $h1 192.0.2.2
check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)" check_err $? "ping with h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
log_test "advertise subset of speeds" log_test "advertise $speed_1_to_advertise vs. $speed_2_to_advertise"
log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise"
done done
ethtool -s $h2 autoneg on ethtool -s $h2 autoneg on
......
...@@ -44,6 +44,7 @@ bucket_test() ...@@ -44,6 +44,7 @@ bucket_test()
# Mausezahn does not include FCS bytes in its length - but the # Mausezahn does not include FCS bytes in its length - but the
# histogram counters do # histogram counters do
len=$((len - ETH_FCS_LEN)) len=$((len - ETH_FCS_LEN))
len=$((len > 0 ? len : 0))
before=$(ethtool --json -S $iface --groups rmon | \ before=$(ethtool --json -S $iface --groups rmon | \
jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val")
......
...@@ -50,6 +50,7 @@ ALL_TESTS=" ...@@ -50,6 +50,7 @@ ALL_TESTS="
NUM_NETIFS=4 NUM_NETIFS=4
lib_dir=$(dirname "$0") lib_dir=$(dirname "$0")
source "$lib_dir"/../../../net/forwarding/lib.sh source "$lib_dir"/../../../net/forwarding/lib.sh
source "$lib_dir"/../../../net/forwarding/tc_common.sh
h1_create() h1_create()
{ {
......
...@@ -15,6 +15,7 @@ NUM_NETIFS=6 ...@@ -15,6 +15,7 @@ NUM_NETIFS=6
lib_dir=$(dirname "$0") lib_dir=$(dirname "$0")
source "$lib_dir"/../../../net/forwarding/lib.sh source "$lib_dir"/../../../net/forwarding/lib.sh
source "$lib_dir"/../../../net/forwarding/ipip_lib.sh source "$lib_dir"/../../../net/forwarding/ipip_lib.sh
source "$lib_dir"/../../../net/forwarding/tc_common.sh
setup_prepare() setup_prepare()
{ {
......
...@@ -24,8 +24,8 @@ setup_prepare() ...@@ -24,8 +24,8 @@ setup_prepare()
busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 busywait "$TIMEOUT" wait_for_port_up ethtool $swp2
check_err $? "ports did not come up" check_err $? "ports did not come up"
local lanes_exist=$(ethtool $swp1 | grep 'Lanes:') busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:"
if [[ -z $lanes_exist ]]; then if [[ $? -ne 0 ]]; then
log_test "SKIP: driver does not support lanes setting" log_test "SKIP: driver does not support lanes setting"
exit 1 exit 1
fi fi
...@@ -122,8 +122,9 @@ autoneg() ...@@ -122,8 +122,9 @@ autoneg()
ethtool_set $swp1 speed $max_speed lanes $lanes ethtool_set $swp1 speed $max_speed lanes $lanes
ip link set dev $swp1 up ip link set dev $swp1 up
ip link set dev $swp2 up ip link set dev $swp2 up
busywait "$TIMEOUT" wait_for_port_up ethtool $swp2
check_err $? "ports did not come up" busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:"
check_err $? "Lanes parameter is not presented on time"
check_lanes $swp1 $lanes $max_speed check_lanes $swp1 $lanes $max_speed
log_test "$lanes lanes is autonegotiated" log_test "$lanes lanes is autonegotiated"
...@@ -160,8 +161,9 @@ autoneg_force_mode() ...@@ -160,8 +161,9 @@ autoneg_force_mode()
ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off
ip link set dev $swp1 up ip link set dev $swp1 up
ip link set dev $swp2 up ip link set dev $swp2 up
busywait "$TIMEOUT" wait_for_port_up ethtool $swp2
check_err $? "ports did not come up" busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:"
check_err $? "Lanes parameter is not presented on time"
check_lanes $swp1 $lanes $max_speed check_lanes $swp1 $lanes $max_speed
log_test "Autoneg off, $lanes lanes detected during force mode" log_test "Autoneg off, $lanes lanes detected during force mode"
......
...@@ -95,27 +95,9 @@ source "$net_forwarding_dir/../lib.sh" ...@@ -95,27 +95,9 @@ source "$net_forwarding_dir/../lib.sh"
# timeout in seconds # timeout in seconds
slowwait() slowwait()
{ {
local timeout=$1; shift local timeout_sec=$1; shift
local start_time="$(date -u +%s)"
while true
do
local out
out=$("$@")
local ret=$?
if ((!ret)); then
echo -n "$out"
return 0
fi
local current_time="$(date -u +%s)"
if ((current_time - start_time > timeout)); then
echo -n "$out"
return 1
fi
sleep 0.1 loopy_wait "sleep 0.1" "$((timeout_sec * 1000))" "$@"
done
} }
############################################################################## ##############################################################################
...@@ -291,11 +273,6 @@ if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then ...@@ -291,11 +273,6 @@ if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then
require_command mreceive require_command mreceive
fi fi
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
exit $ksft_skip
fi
############################################################################## ##############################################################################
# Command line options handling # Command line options handling
...@@ -314,6 +291,23 @@ done ...@@ -314,6 +291,23 @@ done
############################################################################## ##############################################################################
# Network interfaces configuration # Network interfaces configuration
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
exit $ksft_skip
fi
if (( NUM_NETIFS > ${#NETIFS[@]} )); then
echo "SKIP: Importer requires $NUM_NETIFS NETIFS, but only ${#NETIFS[@]} are defined (${NETIFS[@]})"
exit $ksft_skip
fi
for i in $(seq ${#NETIFS[@]}); do
if [[ ! ${NETIFS[p$i]} ]]; then
echo "SKIP: NETIFS[p$i] not given"
exit $ksft_skip
fi
done
create_netif_veth() create_netif_veth()
{ {
local i local i
...@@ -2144,6 +2138,8 @@ bail_on_lldpad() ...@@ -2144,6 +2138,8 @@ bail_on_lldpad()
{ {
local reason1="$1"; shift local reason1="$1"; shift
local reason2="$1"; shift local reason2="$1"; shift
local caller=${FUNCNAME[1]}
local src=${BASH_SOURCE[1]}
if systemctl is-active --quiet lldpad; then if systemctl is-active --quiet lldpad; then
...@@ -2164,7 +2160,8 @@ bail_on_lldpad() ...@@ -2164,7 +2160,8 @@ bail_on_lldpad()
an environment variable ALLOW_LLDPAD to a an environment variable ALLOW_LLDPAD to a
non-empty string. non-empty string.
EOF EOF
exit 1 log_test_skip $src:$caller
exit $EXIT_STATUS
else else
return return
fi fi
......
#!/bin/bash #!/bin/bash
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# +-------------------------+
# | H1 |
# | $h1 + |
# | 192.0.2.2/24 | |
# | 2001:db8:1::2/64 | |
# +-------------------|-----+
# |
# +-------------------|----------------------+
# | | R1 |
# | $rp11 + |
# | 192.0.2.1/24 |
# | 2001:db8:1::1/64 |
# | |
# | + $rp12 + $rp13 |
# | | 169.254.2.12/24 | 169.254.3.13/24 |
# | | fe80:2::12/64 | fe80:3::13/64 |
# +--|--------------------|------------------+
# | |
# +--|--------------------|------------------+
# | + $rp22 + $rp23 |
# | 169.254.2.22/24 169.254.3.23/24 |
# | fe80:2::22/64 fe80:3::23/64 |
# | |
# | $rp21 + |
# | 198.51.100.1/24 | |
# | 2001:db8:2::1/64 | R2 |
# +-------------------|----------------------+
# |
# +-------------------|-----+
# | | |
# | $h2 + |
# | 198.51.100.2/24 |
# | 2001:db8:2::2/64 H2 |
# +-------------------------+
ALL_TESTS=" ALL_TESTS="
ping_ipv4 ping_ipv4
ping_ipv6 ping_ipv6
......
#!/bin/bash #!/bin/bash
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# +-------------------------+
# | H1 |
# | $h1 + |
# | 192.0.2.2/24 | |
# | 2001:db8:1::2/64 | |
# +-------------------|-----+
# |
# +-------------------|----------------------+
# | | R1 |
# | $rp11 + |
# | 192.0.2.1/24 |
# | 2001:db8:1::1/64 |
# | |
# | + $rp12 + $rp13 |
# | | 169.254.2.12/24 | 169.254.3.13/24 |
# | | fe80:2::12/64 | fe80:3::13/64 |
# +--|--------------------|------------------+
# | |
# +--|--------------------|------------------+
# | + $rp22 + $rp23 |
# | 169.254.2.22/24 169.254.3.23/24 |
# | fe80:2::22/64 fe80:3::23/64 |
# | |
# | $rp21 + |
# | 198.51.100.1/24 | |
# | 2001:db8:2::1/64 | R2 |
# +-------------------|----------------------+
# |
# +-------------------|-----+
# | | |
# | $h2 + |
# | 198.51.100.2/24 |
# | 2001:db8:2::2/64 H2 |
# +-------------------------+
ALL_TESTS=" ALL_TESTS="
ping_ipv4 ping_ipv4
ping_ipv6 ping_ipv6
......
#!/bin/bash #!/bin/bash
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# +-------------------------+ +-------------------------+
# | H1 | | H2 |
# | $h1 + | | $h2 + |
# | 192.0.2.2/24 | | | 198.51.100.2/24 | |
# | 2001:db8:1::2/64 | | | 2001:db8:2::2/64 | |
# +-------------------|-----+ +-------------------|-----+
# | |
# +-------------------|----------------------------|-----+
# | R1 | | |
# | $rp1 + $rp2 + |
# | 192.0.2.1/24 198.51.100.1/24 |
# | 2001:db8:1::1/64 2001:db8:2::1/64 |
# +------------------------------------------------------+
ALL_TESTS=" ALL_TESTS="
ping_ipv4 ping_ipv4
ping_ipv6 ping_ipv6
......
...@@ -58,9 +58,10 @@ ksft_exit_status_merge() ...@@ -58,9 +58,10 @@ ksft_exit_status_merge()
$ksft_xfail $ksft_pass $ksft_skip $ksft_fail $ksft_xfail $ksft_pass $ksft_skip $ksft_fail
} }
busywait() loopy_wait()
{ {
local timeout=$1; shift local sleep_cmd=$1; shift
local timeout_ms=$1; shift
local start_time="$(date -u +%s%3N)" local start_time="$(date -u +%s%3N)"
while true while true
...@@ -74,13 +75,22 @@ busywait() ...@@ -74,13 +75,22 @@ busywait()
fi fi
local current_time="$(date -u +%s%3N)" local current_time="$(date -u +%s%3N)"
if ((current_time - start_time > timeout)); then if ((current_time - start_time > timeout_ms)); then
echo -n "$out" echo -n "$out"
return 1 return 1
fi fi
$sleep_cmd
done done
} }
busywait()
{
local timeout_ms=$1; shift
loopy_wait : "$timeout_ms" "$@"
}
cleanup_ns() cleanup_ns()
{ {
local ns="" local ns=""
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment