Commit 81ce5b77 authored by Nuno Sá's avatar Nuno Sá Committed by Dmitry Torokhov

dt-bindings: input: adp5588: add bindings

Add device tree bindings for the adp5588-keys driver.
Signed-off-by: default avatarNuno Sá <nuno.sa@analog.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220829131553.690063-6-nuno.sa@analog.comSigned-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 6704a862
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADP5588 Keypad Controller
maintainers:
- Nuno Sá <nuno.sa@analog.com>
description: |
Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
allOf:
- $ref: matrix-keymap.yaml#
- $ref: input.yaml#
properties:
compatible:
enum:
- adi,adp5587
- adi,adp5588
reg:
maxItems: 1
vcc-supply:
description: Supply Voltage Input
reset-gpios:
description:
If specified, it will be asserted during driver probe. As the line is
active low, it should be marked GPIO_ACTIVE_LOW.
maxItems: 1
interrupts:
maxItems: 1
gpio-controller:
description:
This property applies if either keypad,num-rows lower than 8 or
keypad,num-columns lower than 10.
'#gpio-cells':
const: 2
interrupt-controller:
description:
This property applies if either keypad,num-rows lower than 8 or
keypad,num-columns lower than 10.
'#interrupt-cells':
const: 2
adi,unlock-keys:
description:
Specifies a maximum of 2 keys that can be used to unlock the keypad.
If this property is set, the keyboard will be locked and only unlocked
after these keys are pressed. If only one key is set, a double click is
needed to unlock the keypad. The value of this property cannot be bigger
or equal than keypad,num-rows * keypad,num-columns.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 2
required:
- compatible
- reg
- interrupts
- keypad,num-rows
- keypad,num-columns
- linux,keymap
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
keys@34 {
compatible = "adi,adp5588";
reg = <0x34>;
vcc-supply = <&vcc>;
interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio>;
reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
keypad,num-rows = <1>;
keypad,num-columns = <9>;
linux,keymap = <
MATRIX_KEY(0x00, 0x00, KEY_1)
MATRIX_KEY(0x00, 0x01, KEY_2)
MATRIX_KEY(0x00, 0x02, KEY_3)
MATRIX_KEY(0x00, 0x03, KEY_4)
MATRIX_KEY(0x00, 0x04, KEY_5)
MATRIX_KEY(0x00, 0x05, KEY_6)
MATRIX_KEY(0x00, 0x06, KEY_7)
MATRIX_KEY(0x00, 0x07, KEY_8)
MATRIX_KEY(0x00, 0x08, KEY_9)
>;
};
};
...
......@@ -556,6 +556,7 @@ M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
W: http://wiki.analog.com/ADP5588
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/input/adi,adp5588.yaml
F: drivers/input/keyboard/adp5588-keys.c
ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment