Commit 81fc5dd4 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: omap: rx51: Convert to table based control and DAPM setup

Use table based setup to register the controls and DAPM widgets and routes. This
on one hand makes the code a bit shorter and cleaner and on the other hand the
board level DAPM elements get registered in the card's DAPM context rather than
in the CODEC's DAPM context.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 74a16720
......@@ -237,9 +237,6 @@ static const struct snd_soc_dapm_widget aic34_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", rx51_hp_event),
SND_SOC_DAPM_MIC("HS Mic", NULL),
SND_SOC_DAPM_LINE("FM Transmitter", NULL),
};
static const struct snd_soc_dapm_widget aic34_dapm_widgetsb[] = {
SND_SOC_DAPM_SPK("Earphone", NULL),
};
......@@ -253,9 +250,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
{"DMic Rate 64", NULL, "Mic Bias"},
{"Mic Bias", NULL, "DMic"},
};
static const struct snd_soc_dapm_route audio_mapb[] = {
{"b LINE2R", NULL, "MONO_LOUT"},
{"Earphone", NULL, "b HPLOUT"},
......@@ -281,9 +276,6 @@ static const struct snd_kcontrol_new aic34_rx51_controls[] = {
SOC_ENUM_EXT("Jack Function", rx51_enum[2],
rx51_get_jack, rx51_set_jack),
SOC_DAPM_PIN_SWITCH("FM Transmitter"),
};
static const struct snd_kcontrol_new aic34_rx51_controlsb[] = {
SOC_DAPM_PIN_SWITCH("Earphone"),
};
......@@ -298,19 +290,6 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_nc_pin(dapm, "MIC3R");
snd_soc_dapm_nc_pin(dapm, "LINE1R");
/* Add RX-51 specific controls */
err = snd_soc_add_card_controls(rtd->card, aic34_rx51_controls,
ARRAY_SIZE(aic34_rx51_controls));
if (err < 0)
return err;
/* Add RX-51 specific widgets */
snd_soc_dapm_new_controls(dapm, aic34_dapm_widgets,
ARRAY_SIZE(aic34_dapm_widgets));
/* Set up RX-51 specific audio path audio_map */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
err = tpa6130a2_add_controls(codec);
if (err < 0)
return err;
......@@ -333,24 +312,6 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
return err;
}
static int rx51_aic34b_init(struct snd_soc_dapm_context *dapm)
{
int err;
err = snd_soc_add_card_controls(dapm->card, aic34_rx51_controlsb,
ARRAY_SIZE(aic34_rx51_controlsb));
if (err < 0)
return err;
err = snd_soc_dapm_new_controls(dapm, aic34_dapm_widgetsb,
ARRAY_SIZE(aic34_dapm_widgetsb));
if (err < 0)
return 0;
return snd_soc_dapm_add_routes(dapm, audio_mapb,
ARRAY_SIZE(audio_mapb));
}
/* Digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link rx51_dai[] = {
{
......@@ -371,7 +332,6 @@ static struct snd_soc_aux_dev rx51_aux_dev[] = {
{
.name = "TLV320AIC34b",
.codec_name = "tlv320aic3x-codec.2-0019",
.init = rx51_aic34b_init,
},
};
......@@ -392,6 +352,13 @@ static struct snd_soc_card rx51_sound_card = {
.num_aux_devs = ARRAY_SIZE(rx51_aux_dev),
.codec_conf = rx51_codec_conf,
.num_configs = ARRAY_SIZE(rx51_codec_conf),
.controls = aic34_rx51_controls,
.num_controls = ARRAY_SIZE(aic34_rx51_controls),
.dapm_widgets = aic34_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(aic34_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *rx51_snd_device;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment