Commit 82944421 authored by Florian Westphal's avatar Florian Westphal Committed by Pablo Neira Ayuso

selftests: netfilter: add fib test case

There is a bug report on netfilter.org bugzilla pointing to fib
expression dropping ipv6 DAD packets.

Add a test case that demonstrates this problem.

Next patch excludes icmpv6 packets coming from any to linklocal.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
parent ad9f151e
# SPDX-License-Identifier: GPL-2.0
# Makefile for netfilter selftests
TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \
nft_concat_range.sh nft_conntrack_helper.sh \
nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
......
#!/bin/bash
#
# This tests the fib expression.
#
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
ret=0
sfx=$(mktemp -u "XXXXXXXX")
ns1="ns1-$sfx"
ns2="ns2-$sfx"
nsrouter="nsrouter-$sfx"
timeout=4
log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
cleanup()
{
ip netns del ${ns1}
ip netns del ${ns2}
ip netns del ${nsrouter}
[ $log_netns -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns
}
nft --version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without nft tool"
exit $ksft_skip
fi
ip -Version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
ip netns add ${nsrouter}
if [ $? -ne 0 ];then
echo "SKIP: Could not create net namespace"
exit $ksft_skip
fi
trap cleanup EXIT
dmesg | grep -q ' nft_rpfilter: '
if [ $? -eq 0 ]; then
dmesg -c | grep ' nft_rpfilter: '
echo "WARN: a previous test run has failed" 1>&2
fi
sysctl -q net.netfilter.nf_log_all_netns=1
ip netns add ${ns1}
ip netns add ${ns2}
load_ruleset() {
local netns=$1
ip netns exec ${netns} nft -f /dev/stdin <<EOF
table inet filter {
chain prerouting {
type filter hook prerouting priority 0; policy accept;
fib saddr . iif oif missing counter log prefix "$netns nft_rpfilter: " drop
}
}
EOF
}
load_ruleset_count() {
local netns=$1
ip netns exec ${netns} nft -f /dev/stdin <<EOF
table inet filter {
chain prerouting {
type filter hook prerouting priority 0; policy accept;
ip daddr 1.1.1.1 fib saddr . iif oif missing counter drop
ip6 daddr 1c3::c01d fib saddr . iif oif missing counter drop
}
}
EOF
}
check_drops() {
dmesg | grep -q ' nft_rpfilter: '
if [ $? -eq 0 ]; then
dmesg | grep ' nft_rpfilter: '
echo "FAIL: rpfilter did drop packets"
return 1
fi
return 0
}
check_fib_counter() {
local want=$1
local ns=$2
local address=$3
line=$(ip netns exec ${ns} nft list table inet filter | grep 'fib saddr . iif' | grep $address | grep "packets $want" )
ret=$?
if [ $ret -ne 0 ];then
echo "Netns $ns fib counter doesn't match expected packet count of $want for $address" 1>&2
ip netns exec ${ns} nft list table inet filter
return 1
fi
if [ $want -gt 0 ]; then
echo "PASS: fib expression did drop packets for $address"
fi
return 0
}
load_ruleset ${nsrouter}
load_ruleset ${ns1}
load_ruleset ${ns2}
ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: No virtual ethernet pair device support in kernel"
exit $ksft_skip
fi
ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2}
ip -net ${nsrouter} link set lo up
ip -net ${nsrouter} link set veth0 up
ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0
ip -net ${nsrouter} addr add dead:1::1/64 dev veth0
ip -net ${nsrouter} link set veth1 up
ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1
ip -net ${nsrouter} addr add dead:2::1/64 dev veth1
ip -net ${ns1} link set lo up
ip -net ${ns1} link set eth0 up
ip -net ${ns2} link set lo up
ip -net ${ns2} link set eth0 up
ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
ip -net ${ns1} addr add dead:1::99/64 dev eth0
ip -net ${ns1} route add default via 10.0.1.1
ip -net ${ns1} route add default via dead:1::1
ip -net ${ns2} addr add 10.0.2.99/24 dev eth0
ip -net ${ns2} addr add dead:2::99/64 dev eth0
ip -net ${ns2} route add default via 10.0.2.1
ip -net ${ns2} route add default via dead:2::1
test_ping() {
local daddr4=$1
local daddr6=$2
ip netns exec ${ns1} ping -c 1 -q $daddr4 > /dev/null
ret=$?
if [ $ret -ne 0 ];then
check_drops
echo "FAIL: ${ns1} cannot reach $daddr4, ret $ret" 1>&2
return 1
fi
ip netns exec ${ns1} ping -c 3 -q $daddr6 > /dev/null
ret=$?
if [ $ret -ne 0 ];then
check_drops
echo "FAIL: ${ns1} cannot reach $daddr6, ret $ret" 1>&2
return 1
fi
return 0
}
ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
sleep 3
test_ping 10.0.2.1 dead:2::1 || exit 1
check_drops || exit 1
test_ping 10.0.2.99 dead:2::99 || exit 1
check_drops || exit 1
echo "PASS: fib expression did not cause unwanted packet drops"
ip netns exec ${nsrouter} nft flush table inet filter
ip -net ${ns1} route del default
ip -net ${ns1} -6 route del default
ip -net ${ns1} addr del 10.0.1.99/24 dev eth0
ip -net ${ns1} addr del dead:1::99/64 dev eth0
ip -net ${ns1} addr add 10.0.2.99/24 dev eth0
ip -net ${ns1} addr add dead:2::99/64 dev eth0
ip -net ${ns1} route add default via 10.0.2.1
ip -net ${ns1} -6 route add default via dead:2::1
ip -net ${nsrouter} addr add dead:2::1/64 dev veth0
# switch to ruleset that doesn't log, this time
# its expected that this does drop the packets.
load_ruleset_count ${nsrouter}
# ns1 has a default route, but nsrouter does not.
# must not check return value, ping to 1.1.1.1 will
# fail.
check_fib_counter 0 ${nsrouter} 1.1.1.1 || exit 1
check_fib_counter 0 ${nsrouter} 1c3::c01d || exit 1
ip netns exec ${ns1} ping -c 1 -W 1 -q 1.1.1.1 > /dev/null
check_fib_counter 1 ${nsrouter} 1.1.1.1 || exit 1
sleep 2
ip netns exec ${ns1} ping -c 3 -q 1c3::c01d > /dev/null
check_fib_counter 3 ${nsrouter} 1c3::c01d || exit 1
exit 0
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment