Merge tag 'omap-for-v5.5/soc-late-signed' of...

Merge tag 'omap-for-v5.5/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

Few late SoC changes for v5.5 merge window

These changes just clean up few typos, and there is one non-critical
correction of missing put_device() after calling of_platform_populate()
for display controller.

Naturally none of this is urgent and can be merged when suitable.

* tag 'omap-for-v5.5/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
  OMAP2: fixup doc comments in omap_device
  ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")

Link: https://lore.kernel.org/r/pull-1573579927-542764@atomide.com-2Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-omap1/Kconfig

@@ -4,30 +4,25 @@ if ARCH_OMAP1
 menu "TI OMAP1 specific features"
 
 comment "OMAP Core Type"
-	depends on ARCH_OMAP1
 
 config ARCH_OMAP730
-	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP850
-	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 
 config ARCH_OMAP15XX
-	depends on ARCH_OMAP1
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
-	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
@@ -35,7 +30,6 @@ config ARCH_OMAP16XX
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
-	depends on ARCH_OMAP
 	default y
 	help
 	  Pin multiplexing support for OMAP boards. If your bootloader
@@ -60,25 +54,24 @@ config OMAP_MUX_WARNINGS
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP1
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
 
 config MACH_OMAP_H2
 	bool "TI H2 Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H3
 	bool "TI H3 Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
@@ -91,7 +84,7 @@ config MACH_HERALD
 
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
@@ -106,21 +99,21 @@ config OMAP_OSK_MISTRAL
 
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP730
     	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP730
     	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	help
 	  Support for the Palm Tungsten E PDA.  To boot the kernel, you'll
 	  need a PalmOS compatible bootloader; check out
@@ -129,7 +122,7 @@ config MACH_OMAP_PALMTE
 
 config MACH_OMAP_PALMZ71
 	bool "Palm Zire71"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	help
 	 Support for the Palm Zire71 PDA. To boot the kernel,
 	 you'll need a PalmOS compatible bootloader; check out
@@ -138,7 +131,7 @@ config MACH_OMAP_PALMZ71
 
 config MACH_OMAP_PALMTT
 	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	help
 	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
 	  need a PalmOS compatible bootloader (Garux); check out
@@ -147,7 +140,7 @@ config MACH_OMAP_PALMTT
 
 config MACH_SX1
 	bool "Siemens SX1"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	select I2C
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,
@@ -159,14 +152,14 @@ config MACH_SX1
 
 config MACH_NOKIA770
 	bool "Nokia 770"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
 	help
 	  Support for the Nokia 770 Internet Tablet. Say Y here if you
 	  have such a device.
 
 config MACH_AMS_DELTA
 	bool "Amstrad E3 (Delta)"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	select FIQ
 	select GPIO_GENERIC_PLATFORM
 	select LEDS_GPIO_REGISTER
@@ -178,7 +171,7 @@ config MACH_AMS_DELTA
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -110,7 +110,7 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip,
 
 		/*
 		 * FIQ handler takes full control over serio data and clk GPIO
-		 * pins.  Initiaize them and keep requested so nobody can
+		 * pins.  Initialize them and keep requested so nobody can
 		 * interfere.  Fail if any of those two couldn't be requested.
 		 */
 		switch (i) {

arch/arm/mach-omap2/display.c

@@ -265,6 +265,7 @@ static int __init omapdss_init_of(void)
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
+		put_device(&pdev->dev);
 		return r;
 	}
 

arch/arm/mach-omap2/omap_device.c

@@ -119,11 +119,7 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od,
 
 /**
  * omap_device_build_from_dt - build an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
+ * @pdev: The platform device to update.
  *
  * Function for building an omap_device already registered from device-tree
  *
@@ -292,7 +288,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od)
 
 /**
  * omap_device_get_context_loss_count - get lost context count
- * @od: struct omap_device *
+ * @pdev: The platform device to update.
  *
  * Using the primary hwmod, query the context loss count for this
  * device.
@@ -321,9 +317,8 @@ int omap_device_get_context_loss_count(struct platform_device *pdev)
 /**
  * omap_device_alloc - allocate an omap_device
  * @pdev: platform_device that will be included in this omap_device
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
+ * @ohs: ptr to the omap_hwmod for this omap_device
+ * @oh_cnt: the size of the ohs list
  *
  * Convenience function for allocating an omap_device structure and filling
  * hwmods, and resources.
@@ -649,7 +644,7 @@ struct dev_pm_domain omap_device_pm_domain = {
 
 /**
  * omap_device_register - register an omap_device with one omap_hwmod
- * @od: struct omap_device * to register
+ * @pdev: the platform device (omap_device) to register.
  *
  * Register the omap_device structure.  This currently just calls
  * platform_device_register() on the underlying platform_device.
@@ -668,7 +663,7 @@ int omap_device_register(struct platform_device *pdev)
 
 /**
  * omap_device_enable - fully activate an omap_device
- * @od: struct omap_device * to activate
+ * @pdev: the platform device to activate
  *
  * Do whatever is necessary for the hwmods underlying omap_device @od
  * to be accessible and ready to operate.  This generally involves
@@ -702,7 +697,7 @@ int omap_device_enable(struct platform_device *pdev)
 
 /**
  * omap_device_idle - idle an omap_device
- * @od: struct omap_device * to idle
+ * @pdev: The platform_device (omap_device) to idle
  *
  * Idle omap_device @od.  Device drivers call this function indirectly
  * via pm_runtime_put*().  Returns -EINVAL if the omap_device is not